We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.

For more information visit our privacy policy.

Development Tasks Sample Clauses

Development Tasks. (a) Following the election of a Compound Construct as a Product under Section 3.1, Biogen Idec shall develop an initial HLDP for the Product to address both the Biogen Idec and Sobi Territories for the Product, which HLDP shall be submitted to the JSC for approval. Biogen Idec shall Manufacture, Develop and Finally Develop each Product for the United States and EU markets in accordance with the HLDP. (i) As of the Effective Date, the Parties agree on the HLDP contained herein as Schedule 3.3(a) that addresses both the Biogen Idec and Sobi Territories for the Lead Products. (ii) Each HLDP shall further define the development principles, operational plans and diligence obligations under which Biogen Idec will carry out Manufacturing, Development and Final Development activities and provide a non-binding budget for each Product. Each such HLDP shall address and contain HLDP Principles that include, at a minimum, requirements that: (A) [**] (B) [**] (C) [**] (D) [**]. (iii) [**]. Each updated HLDP shall reference this Agreement but shall not require an amendment to this Agreement. (b) Biogen Idec shall have responsibility for, and shall be free to make, all operational Manufacturing, Development and Final Development decisions consistent with the principles established by the HLDP. Biogen Idec shall take Sobi input from JSC meetings into account and shall have final decision-making authority for all Product Development, Manufacturing and Final Development decisions prior to Sobi’s Opt-In for such Product; provided, that Biogen Idec may not take any action that would conflict with the rights granted Sobi hereunder or conflict with the terms of this Agreement. On a periodic basis prior to Opt-In, but not more frequently than quarterly unless otherwise agreed by the JSC, Biogen Idec will update Sobi as to its progress on a Product-by-Product basis and solicit input from Sobi, particularly on matters pertaining to the Sobi Territory. Any input from Sobi on topics discussed in a JSC meeting shall be communicated by Sobi to Biogen Idec during the same JSC meeting unless a later timeframe for providing such input is agreed to and documented in the minutes of that JSC meeting. (c) Material Operational Changes and changes to the HLDP Principles may be made, only by mutual agreement of the Parties, except to the extent that Biogen Idec, in its reasonable discretion, determines that such Material Operational Change is a necessary condition for FDA and/or EMA Regulatory A...
Sample 1Sample 2
Development Tasks. Licensee, Developer and TTR shall perform their respective development tasks specified in Exhibit A in accordance with the development schedule specified therein and the design specifications specified in Exhibit B (the "Development").
Sample 1
Development Tasks. Following receipt of a Notice to Proceed with Design, Generator shall use commercially reasonable efforts to complete the following: (i) submit and pay for any zoning approvals required to construct the System, and (ii) submit and pay for any applications to the Host Utility necessary to interconnect the System to the utility’s electric distribution system (the hereinafter “Development Tasks”). Effective at the Notice to Proceed with Design, Customer grants to Generator and to Generator’s agents, employees and contractors an irrevocable non-exclusive license running with the Site for access to, on, over, under and across the Site for the purposes of performing all of Generator’s obligations and enforcing all of Generator’s rights set forth in this Article. Customer’s execution of the Agreement shall serve as its “Notice to Proceed with Design” unless stated otherwise on the signature page to this Agreement. Customer may later provide a Notice to Proceed with Design if, for example, at the time the Agreement is executed, the applicable Site is under construction or it is otherwise inconvenient for the Development Tasks to proceed. If the Agreement calls for a separate later Notice to Proceed with Design, the Parties shall develop a schedule for Generator to perform the Development Tasks. In the event that any of the permits, agreements or authorizations are required to be in the Customer’s name, Customer agrees to take actions as Generator may reasonably require to apply for and obtain them, and Generator shall reimburse Customer for its applicable actual costs.
Sample 1
Development Tasks. 4.3.1 With respect to the Biomira Territory, Biomira (or its designated Affiliate) will be responsible for conducting, or having conducted, those development (including Clinical Development) and Market Approval (including the preparation, submission and prosecution of all regulatory authority filings and applications required to obtain all necessary Market Approvals to sell Product in each country in the Biomira Territory) tasks identified as its obligation under the applicable Steering Committee-approved Development Plan. Biomira shall use all commercially reasonable efforts to perform the development (including Clinical Development) and Market Approval tasks assigned to it in a prudent and skilful manner in accordance, in all material respects, with the Development Plans then in effect and applicable laws and regulations. 4.3.2 With respect to the Cancer Vac Territory, Cancer Vac (or its designated Affiliate) will be responsible for conducting, or having conducted, those development (including Clinical Development) and Market Approval (including the preparation, submission and prosecution of all regulatory authority filings and applications required to obtain all necessary Market Approvals to sell Product in each country in the Cancer Vac Territory) tasks identified as its obligation under the applicable Steering Committee-approved Development Plan. Cancer Vac shall use all commercially reasonable efforts to perform the development (including Clinical Development) and Market Approval tasks assigned to it in a prudent and skilful manner in accordance, in all material respects, with the Development Plans then in effect and applicable laws and regulations. 4.3.3 Unless otherwise determined by the Steering Committee or agreed in writing by Biomira and Cancer Vac, all Development Costs shall be deemed to be Shared Costs for purposes of this Agreement.
Sample 1
Development Tasks. During the Development Phase, the Parties shall commence development of the Nasdaq Application in accordance with the Specifications. In furtherance thereof, the Parties shall, during the Development Phase, take the following actions: (a) OptiMark shall develop and internally test, at its own expense, the OptiMark Matching Module to match Profiles in Nasdaq Securities, as provided in the Specifications. In addition, OptiMark shall develop and internally test, at its own expense, such other tasks as described in this Agreement, assigned to it in the Specifications, or as agreed to by the Parties, including the development of the appropriate Terminal Program for the Nasdaq Workstation. The OptiMark Matching Module and all other components and functions of the Nasdaq Application developed by or operated for OptiMark hereunder shall satisfy the Specifications in all material respects. (b) Nasdaq shall develop and internally test, at its own expense, the capability of messages from the Nasdaq Workstation to flow through the EWN and the VPN for delivery to and from the OptiMark Matching Module, as provided in the Specifications. In addition, Nasdaq shall develop and internally test, at its own expense, such other tasks as described in this Agreement, assigned to it in the Specifications, or as agreed to by the Parties. The components and functions of the Nasdaq Application developed by or operated for Nasdaq that affect the ability to effect and process a transaction resulting from a Call, shall satisfy the Specifications in all material respects.
Sample 1
Development Tasks. 5 2.1 DUTIES OF AUSTRIA MIKRO SYSTEME..............................5 2.2
Sample 1
Development Tasks. 2.1 [***] Design and Layout 2.1.1 Task Description Cree will design a [***] per specification (TBD) to be supplied as a classified addendum to this SOW. Two design iterations are planned. The following tasks will be performed: • [***] • [***] • [***] • [***] • [***] • [***] A design review will be conducted prior to releasing the design for mask fabrication. 2.2 [***] Fabrication
Sample 1
Development Tasks a. PCG will open the new quarter in the PCG Claiming System in order for School System to review/update as necessary their current Staff Pool List (SPL), calendar, and shifts. b. School System will certify the SPL, calendar, and shifts in the PCG Claiming System within the required time frame.
Sample 1
Development Tasks 
Sample 1Sample 2Sample 3

Related to Development Tasks

  • Development Activities The Development activities referred to in item “b” of paragraph 3.1 include: studies and projects of implementation of the Production facilities; drilling and completion of the Producing and injection xxxxx; and installation of equipment and vessels for extraction, collection, Treatment, storage, and transfer of Oil and Gas. The installation referred to in item “c” includes, but is not limited to, offshore platforms, pipelines, Oil and Gas Treatment plants, equipment and facilities for measurement of the inspected Production, wellhead equipment, production pipes, flow lines, tanks, and other facilities exclusively intended for extraction, as well as oil and gas pipelines for Production Outflow and their respective compressor and pumping stations.

  • Development Plan document specifying the work program, schedule, and relevant investments required for the Development and the Production of a Discovery or set of Discoveries of Oil and Gas in the Concession Area, including its abandonment.

  • Development Program A. Development activities to be undertaken (Please break activities into subunits with the date of completion of major milestones) B. Estimated total development time

  • Development Phase contractual phase initiated with the approval of ANP for the Development Plan and which is extended during the Production Phase while investments in xxxxx, equipment, and facilities for the Production of Oil and Gas according to the Best Practices of the Oil Industry are required.

  • Development Work The Support Standards do not include development work either (i) on software not licensed from CentralSquare or (ii) development work for enhancements or features that are outside the documented functionality of the Solutions, except such work as may be specifically purchased and outlined in Exhibit 1. CentralSquare retains all Intellectual Property Rights in development work performed and Customer may request consulting and development work from CentralSquare as a separate billable service.

  • Development Plans Customer has provided Provider with a report attached hereto as Exhibit D (the “Current Development Plan”) describing in detail, as of January 1, 2017, the planned development, drilling, production, processing, treating, marketing and other activities to take place with respect to Dedicated Production and Customer Injected NGLs for the applicable Development Period. The information contained in the Current Development Plan is, with respect to the first three Years covered by the Current Development Plan, on a Quarter-by-Quarter basis, and with respect to the remaining Years covered by the Current Development Plan, on a Year-by-Year basis. The Current Development Plan attached hereto has been approved by the Parties. (a) From time to time during each Year of the Term, the Parties shall meet to discuss the planned development, drilling, production, processing, treating, marketing and other activities that Customer expects to take place with respect to Dedicated Production and Customer Injected NGLs for the then-applicable Development Period. Customer and Provider shall each make their respective representatives available to participate in such meetings and discussions. No later than August 1 of each such Year, Customer shall provide (or cause to be provided) to Provider a proposed update of the then-currently agreed Development Plan, prepared on the same basis as the Current Development Plan and describing in detail the planned development, drilling, production, processing, treating, marketing and other activities to take place with respect to Dedicated Production and Customer Injected NGLs for the then-applicable Development Period (any such update, an “Updated Development Plan” and, together with the Current Development Plan, each, a “Development Plan”). (b) Each proposed Development Plan shall include information as to the following, in each case, broken out, with respect to the first three Years covered by such Development Plan, on a Quarter-by-Quarter basis, and, with respect to the remaining Years covered by such Development Plan, on a Year-by-Year basis: (i) forward-looking production estimates for the applicable time period covered by such Development Plan for all Customer Gas and Customer Injected NGLs (A) that Customer reasonably and in good faith believes will become owned or Controlled by Customer during the time period covered by such Development Plan, and/or (B) that will be produced from (I) in the aggregate, all Xxxxx then-existing and (II) in the aggregate, all Xxxxx that are expected to be drilled during the time period covered by such Development Plan (each such Well reflected in such Development Plan, a “Planned Well” and, such collective estimates described in subsections (A) and (B), both with respect to a particular Quarter and an entire Year, the “Dedicated Production Estimates”); TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**). (ii) (A) each new receipt point (including the location thereof) proposed by Customer with respect to the Dedicated Production Estimate reflected in such Development Plan (each such receipt point, a “Planned Receipt Point”), (B) each Receipt Point at which Customer expects to Tender Customer Gas or Customer Injected NGLs reflected in such Development Plan into the TGP System, and (C) the estimated portion of the Dedicated Production Estimate contained in such Development Plan that Customer expects to Tender at each such Receipt Point and Planned Receipt Point; (iii) (A) each new delivery point (including the location thereof) proposed by Customer with respect to the Dedication Production Estimate reflected in such Development Plan (each such delivery point, a “Planned Delivery Point”), (B) each Delivery Point at which Customer expects to Nominate Customer Residue Gas or Customer NGLs produced from the Dedicated Production Estimate reflected in such Development Plan to be redelivered to Customer, and (C) the estimated volumes of Customer Residue Gas and Customer NGLs produced from the Dedication Production Estimate contained in such Development Plan that Customer expects to Nominate to each such Delivery Point; (iv) the earliest date on which each Planned Receipt Point and Planned Delivery Point included in the Development Plan is required by Customer to be placed into service, which date shall not be earlier than three Months after the January 1st that is immediately subsequent to the date that the Development Plan that initially reflected such Planned Receipt Point or Planned Delivery Point was delivered to Provider hereunder; (v) the anticipated characteristics of the production from the Xxxxx and Planned Xxxxx reflected in such Development Plan (including liquids content and gas and liquids composition) and the projected production volumes and production pressures applicable thereto; provided that Customer may utilize the existing and historical production information from similarly situated Xxxxx; (vi) any (A) proposed revision to the then-existing Dedicated Area and/or any then-existing Dedicated Contract and/or (B) any new contract that Customer proposes to be a Dedicated Contract; and (vii) other information reasonably requested by Provider that is relevant to the design, construction, and operation of the TGP System, including (A) any applicable Plant Expansion or Facilities Modification proposed by Customer, (B) the relevant Receipt Point and Planned Receipt Point facilities applicable to such Development Plan, and (C) the relevant Delivery Point and Planned Delivery Point facilities applicable to such Development Plan. TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**).

  • Research Plan The Parties recognize that the Research Plan describes the collaborative research and development activities they will undertake and that interim research goals set forth in the Research Plan are good faith guidelines. Should events occur that require modification of these goals, then by mutual agreement the Parties can modify them through an amendment, according to Paragraph 13.6.

  • Development and Commercialization Subject to Sections 4.6 and 4.7, Fibrocell shall be solely responsible for the development and Commercialization of Fibrocell Products and Improved Products. Fibrocell shall be responsible for all costs incurred in connection with the Fibroblast Program except that Intrexon shall be responsible for the following: (a) costs of establishing manufacturing capabilities and facilities in connection with Intrexon’s manufacturing obligation under Section 4.6 (provided, however, that Intrexon may include an allocable portion of such costs, through depreciation and amortization, when calculating the Fully Loaded Cost of manufacturing a Fibrocell Product, to the extent such allocation, depreciation, and amortization is permitted by US GAAP, it being recognized that the majority of non-facilities scale-up costs cannot be capitalized and amortized under US GAAP); (b) costs of basic research with respect to the Intrexon Channel Technology and Intrexon Materials (i.e., platform improvements) but, for clarity, excluding research described in Section 4.7 or research requested by the JSC for the development of a Fibrocell Product or an Improved Product (which research costs shall be reimbursed by Fibrocell); (c) [*****]; and (d) costs of filing, prosecution and maintenance of Intrexon Patents. The costs encompassed within subsection (a) above shall include the scale-up of Intrexon Materials and related active pharmaceutical ingredients for clinical trials and Commercialization of Fibrocell Products undertaken pursuant to Section 4.6, which shall be at Intrexon’s cost whether it elects to conduct such efforts internally or through Third Party contractors retained by either Intrexon or Fibrocell (with Intrexon’s consent).

  • Research Program The term “

  • Research Project The findings of any research project, which would change the provisions of this Agreement will not be implemented until such changes are negotiated and agreed to by the parties.

Most Referenced Clauses

Most Referenced Definitions