End Disks Sample Clauses

End Disks.  The end discs are made from material conforming to SANS 1431 Grade 300WA.  The hubs are made from either rolled plates or steel forgings, provided that the carbon content does not exceed 0.2% by mass.  No welded construction is allowed in the zone of the end disc and locking hub. With an end disc thickness of less than 30 mm and with the disc fitted on the rim inside diameter, the disc is welded to the rim on both the inside and outside face, should physical access allow this. Each weld shall penetrate at least one half of the end disc thickness. For an end disc thickness greater than 30 mm the attachment of the end disc to the shell is provided by a X xxxxxxxxxx welded circumferentially in the zone of the shell ends.  The maximum principal tri-axial (radial, tangential and torsional) stresses shall not individually exceed 50% of the material yield strength.  The combined maximum tri-axial stress shall not exceed 90% of the material yield strength in accordance with the Maximum Strain Energy Theory.  The fatigue stress reversal range shall not exceed 33% of the material yield strength for each of the principal tri-axial stresses for welded sections and for native metal respectively. The fatigue life is calculated utilising the accumulative fatigue damage data as per table.
Sample 1
AutoNDA by SimpleDocs
End Disks a. The end discs are made from material conforming to SANS 1431 Grade 300WA.
Sample 1

Related to End Disks

  • DISCIPLINE AND DISCHARGE 21.01 The Employer may warn, suspend, demote or discharge employees for just cause. If the conduct or performance of an employee warrants disciplinary action, such action shall be confirmed in writing. A copy of all such documentation shall be provided to the employee(s) involved and forwarded to the office of the Union at the time they are issued.

  • DISCIPLINE AND DISCHARGE OF EMPLOYEES (a) Pursuant to Section 84(1) of the Labour Relations Code, the following standards shall be applied:

  • DISCIPLINE AND DISCHARGE CASES 13:01 An employee who is discharged by the Employer shall, as soon as may be practicable thereafter, be given written notice thereof and a copy of such notice shall, within seven (7) working days after such discharge, be forwarded to the President of the Union, which said Notice shall contain the reason for the discharge of the said employee.

  • SUSPENSION AND DISCIPLINE 29.01 When an employee is suspended or discharged from duty, the Employer undertakes to notify the employee in writing, with a copy to the Association, of the reason for such suspension or discharge. The Employer shall endeavour to give such notification at the time of suspension or discharge.

  • DOCUMENTS AND DISCHARGE Buyer shall not call for the production of any title deed, abstract, survey or other evidence of title to the property except such as are in the possession or control of Seller. If requested by Buyer, Seller will deliver any sketch or survey of the property within Seller’s control to Buyer as soon as possible and prior to the Requisition Date. If a discharge of any Charge/Mortgage held by a corporation incorporated pursuant to the Trust And Loan Companies Act (Canada), Chartered Bank, Trust Company, Credit Union, Caisse Populaire or Insurance Company and which is not to be assumed by Buyer on completion, is not available in registrable form on completion, Buyer agrees to accept Seller’s lawyer’s personal undertaking to obtain, out of the closing funds, a discharge in registrable form and to register same, or cause same to be registered, on title within a reasonable period of time after completion, provided that on or before completion Seller shall provide to Buyer a mortgage statement prepared by the mortgagee setting out the balance required to obtain the discharge, and, where a real-time electronic cleared funds transfer system is not being used, a direction executed by Seller directing payment to the mortgagee of the amount required to obtain the discharge out of the balance due on completion.

  • Notice and Disclaimer 2.1. The Data is the property of Xxx Xxxxxxxx and is protected by applicable copyright law. In no event shall User publish, retransmit, display, redistribute, or otherwise reproduce any or all of the Data in any format to anyone, except as allowed in Section 1 of this agreement.

  • Suspension and Discharge An employee who has not completed the probationary period may be released without appeal through the grievance procedure. Employees having successfully completed their probationary period shall only be disciplined or discharged for just cause. Prior to suspending or discharging an employee, provided they have completed their probationary period, such employee and the Union Xxxxxxx shall be given the reasons in writing, by the Employer, for the suspension or discharge.

  • DISCHARGE AND DISCIPLINE 20.01 No employee shall be disciplined or discharged without just cause.

  • Release and Discharge 11.1 The acceptance by the Designer of the last payment under the provisions of Article 6.5 or Article 12 in the event of termination of the Contract, shall in each instance, operate as and be a release to the Owner and the Authority and their employees and officers, from all claims of the Designer and its Subconsultants for payment for services performed and/or furnished, except for those written claims submitted by the Designer to the Owner with, or prior to, the last invoice.

  • DISCIPLINE, SUSPENSION AND DISCHARGE 14.01 The Employer shall not discipline, suspend or discharge any employee except for just cause.

Time is Money Join Law Insider Premium to draft better contracts faster.