Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point.
2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply.
2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.
2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire.
2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product.
2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters).
2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance.
2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks.
2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire.
2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
Operating Agreement The Borrower will not amend, modify, waive or terminate any provision of its operating agreement without the prior written consent of the Administrative Agent.
Additional Acceptable Uses of Student Data Contractor is prohibited from using Student Data for any secondary use not described in this agreement except:
a. for adaptive learning or customized student learning purposes;
b. to market an educational application or product to a parent or legal guardian of a student if Contractor did not use Data, shared by or collected per this Contract, to market the educational application or product;
c. to use a recommendation engine to recommend to a student i. content that relates to learning or employment, within the third-party contractor's internal application, if the recommendation is not motivated by payment or other consideration from another party; or
Declaration of Trust The Owner Trustee hereby declares that it will hold the Owner Trust Estate in trust upon and subject to the conditions set forth herein for the use and benefit of the Certificateholders, subject to the obligations of the Trust under the Basic Documents. It is the intention of the parties hereto that the Trust constitute a statutory trust under the Statutory Trust Act and that this Agreement constitute the governing instrument of such statutory trust. The Trust is not intended to be a business trust within the meaning of Section 101(9)(A)(v) of the Bankruptcy Code. It is also the intention of the parties hereto that, solely for Federal, state and local income and franchise tax purposes, on and after the Closing Date, (a) so long as the Trust has only one Certificateholder, the Trust shall be disregarded as a separate entity and (b) at such time as the Trust has more than one Certificateholder, the Trust will be treated as a partnership, with the assets of the partnership being the Receivables and other assets held by the Trust, the partners of the partnership being the Certificateholders, and the Notes being non-recourse debt of the partnership. The Depositor (and any future Certificateholder by the purchase of the Trust Certificate will be deemed to have agreed) and the Owner Trustee agree to take no action inconsistent with such tax treatment. The Trust shall not elect to be treated as an association under Treasury Regulations Section 301.7701-3(a). The parties agree that, unless otherwise required by appropriate tax authorities, the sole Certificateholder or the Trust, as applicable, will file or cause to be filed annual or other necessary returns, reports and other forms consistent with the foregoing characterization of the Trust for such tax purposes. Effective as of the date hereof, the Owner Trustee, shall have all rights, powers and duties set forth herein and, to the extent not inconsistent herewith, in the Statutory Trust Act with respect to accomplishing the purposes of the Trust. Any action taken on behalf of the Trust prior to the date hereof with respect to the filing of financing statements, the Certificate of Trust, a qualification to do business in the State of Alabama or any other similar qualification or license in any other state or jurisdiction, if applicable, is hereby ratified.
Condominium Documents (a) Borrower shall observe and perform each and every material term to be observed or performed by Borrower as the owner of Condominium Property under the Condominium Documents.
(b) Subject to Borrower’s right to contest the same in accordance with the express terms and conditions hereof and of the other Loan Documents and of the Condominium Documents, if any, Borrower shall promptly pay all Assessments imposed pursuant to the Condominium Documents when the same become due and payable with respect to the Condominium Property. Borrower shall deliver to Lender, promptly upon request, evidence satisfactory to Lender that the Assessments have been so paid and are not delinquent with respect to the Condominium Property.
(c) Lender shall have the rights and privileges which Borrower has as though Lender were in fact the owner of the Condominium Property, which rights and privileges shall include, without limitation, all voting rights accruing to Borrower under the terms of the Condominium Documents. Upon the occurrence and during the continuance of an Event of Default, Lender may vote in place of Borrower and may exercise any and all of said rights. Borrower hereby irrevocably appoints Lender as its attorney-in-fact, coupled with an interest to vote as Borrower’s proxy and to act with respect to all of said rights so long as such Event of Default continues hereunder. Notwithstanding anything contained herein to the contrary, nothing contained herein or otherwise shall render Lender liable for any Assessments.
(d) The Trustee shall at all times be a financial institution or trust company having a long-term credit rating of not less than “A” or its equivalent by S&P and Xxxxx’x.
(e) Borrower shall promptly deliver to Lender a true, complete and correct copy of all notices of default received by Borrower with respect to any obligation or duty of Borrower under the Condominium Documents.
Condominiums/Planned Unit Developments If the Mortgaged Property is a condominium unit or a planned unit development (other than a de minimis planned unit development) such condominium or planned unit development project such Mortgage Loan was originated in accordance with, and the Mortgaged Property meets the guidelines set forth in the Originator's Underwriting Guidelines;
Operating Partnership Agreement The Operating Partnership Agreement, in substantially the form attached hereto as Exhibit B, shall have been executed and delivered by the partners of the Operating Partnership and shall be in full force and effect and, except as contemplated by Section 2.03 or the other Formation Transaction Documents, shall not have been amended or modified.
Vendor Encouraging Members to bypass TIPS agreement Encouraging entities to purchase directly from the Vendor or through another agreement, when the Member has requested using the TIPS cooperative Agreement or price, and thereby bypassing the TIPS Agreement is a violation of the terms and conditions of this Agreement and will result in removal of the Vendor from the TIPS Program.
FALSE STATEMENTS CONCERNING HIGHWAY PROJECTS T h i s p r o v i s i o n i s applicable to all Federal-aid construction contracts and to all related subcontracts. In order to assure high quality and durable construction in conformity with approved plans and specifications and a high degree of reliability on statements and representations made by engineers, contractors, suppliers, and workers on Federal- aid highway projects, it is essential that all persons concerned with the project perform their functions as carefully, thoroughly, and honestly as possible. Willful falsification, distortion, or misrepresentation with respect to any facts related to the project is a violation of Federal law. To prevent any misunderstanding regarding the seriousness of these and similar acts, Form FHWA-1022 shall be posted on each Federal-aid highway project (23 CFR 635) in one or more places where it is readily available to all persons concerned with the project: 18 U.S.C. 1020 reads as follows: "Whoever, being an officer, agent, or employee of the United States, or of any State or Territory, or whoever, whether a person, association, firm, or corporation, knowingly makes any false statement, false representation, or false report as to the character, quality, quantity, or cost of the material used or to be used, or the quantity or quality of the work performed or to be performed, or the cost thereof in connection with the submission of plans, maps, specifications, contracts, or costs of construction on any highway or related project submitted for approval to the Secretary of Transportation; or Whoever knowingly makes any false statement, false representation, false report or false claim with respect to the character, quality, quantity, or cost of any work performed or to be performed, or materials furnished or to be furnished, in connection with the construction of any highway or related project approved by the Secretary of Transportation; or Whoever knowingly makes any false statement or false representation as to material fact in any statement, certificate, or report submitted pursuant to provisions of the Federal-aid Roads Act approved July 1, 1916, (39 Stat. 355), as amended and supplemented; Shall be fined under this title or imprisoned not more than 5 years or both."
