Existing Generator and Existing Compactor Sample Clauses

Existing Generator and Existing Compactor. If the Premises are delivered to Tenant with the generator previously used by the prior tenant (“Existing Generator”) and/or with the compactor previously used by the prior tenant (“Existing Compactor”), Tenant shall be responsible for the maintenance, use or removal of the Existing Generator and Existing Compactor, as applicable. Tenant shall protect, defend, indemnify and hold harmless Landlord from and against any and all claims, damages, liabilities, costs or expenses of every kind and nature (including without limitation reasonable attorneys’ fees) imposed upon or incurred by or asserted against Landlord arising out of Tenant’s installation, maintenance, use or removal of the Existing Generator and Existing Compactor, as applicable.
AutoNDA by SimpleDocs

Related to Existing Generator and Existing Compactor

  • Generator Subject to the provisions of this Section 29.36, Tenant shall be entitled to install, operate and maintain a generator and any other equipment related thereto, including, without limitation, a fuel system, wiring and shaft space (“Generator”) next to the Building at Tenant’s sole cost and expense (without paying any additional fee or rental to Landlord for the use thereof). Prior to the installation of the Generator, Tenant shall inspect the proposed location to determine a suitable location for the Generator, and Tenant shall submit written plans and specifications relative to the type, size and proposed location (including any proposed screening) of the Generator to Landlord for its review and written approval. Tenant shall be solely responsible for the cost of acquisition, installation, operation, and maintenance of the Generator; and Tenant shall install, maintain and operate the Generator in accordance with all federal, state, and local laws, statutes, ordinances, rules and regulations, including without limitation, obtaining and maintaining any and all permits, approvals and licenses required to install and operate the Generator by any governmental authority having jurisdiction. Landlord and Tenant agree that, upon the expiration of earlier termination of the Lease Term, Tenant shall not be required to remove the Generator, any associated cabling, wiring and screening or other improvements. Tenant shall not be entitled to grant or assign to any third party (other than a permitted assignee of Tenant’s rights under the Lease or a permitted subtenant relative to the Premises (or a portion thereof)) the right to use the Generator without Landlord’s prior written consent (which consent may be granted or withheld in Landlord’s discretion). Upon reasonable advance notice to Tenant (and provided Landlord reasonably coordinates with Tenant and provides an alternate source of backup generator capacity during said transition), Landlord shall be entitled to cause the Generator to be moved to another location near the Building, at Landlord’s cost and expense. Tenant shall pay all personal property taxes on the Generator. Tenant shall also pay any increases in the real property taxes of the Building due to the installation of the Generator within thirty (30) days of receipt of notice from Landlord which includes proof of such increase in taxes. Tenant’s indemnity obligations under Section 5.4.1.5 of the Lease, relating to the use of Hazardous Materials, shall apply to the use and operation of the Generator. Finally, Tenant’s insurance obligations under Section 10.3 of the Lease shall apply to the Generator.

  • Provisioning Line Splitting and Splitter Space 3.8.1 The Data LEC, Voice CLEC or BellSouth may provide the splitter. When Southern Telecom or its authorized agent owns the splitter, Line Splitting requires the following: a non-designed analog Loop from the serving wire center to the NID at the End User’s location; a collocation cross connection connecting the Loop to the collocation space; a second collocation cross connection from the collocation space connected to a voice port; the high frequency spectrum line activation, and a splitter. The Loop and port cannot be a Loop and port combination (i.e. UNE-P), but must be individual stand-alone Network Elements. When BellSouth owns the splitter, Line Splitting requires the following: a non designed analog Loop from the serving wire center to the NID at the End User’s location with CFA and splitter port assignments, and a collocation cross connection from the collocation space connected to a voice port. 3.8.2 An unloaded 2-wire copper Loop must serve the End User. The meet point for the Voice CLEC and the Data LEC is the point of termination on the MDF for the Data LEC's cable and pairs. 3.8.3 The foregoing procedures are applicable to migration to Line Splitting Service from a UNE-P arrangement, BellSouth Retail Voice Service, BellSouth High Frequency Spectrum (CO Based) Line Sharing. 3.8.4 For other migration scenarios to line splitting, BellSouth will work cooperatively with CLECs to develop methods and procedures to develop a process whereby a Voice CLEC and a Data LEC may provide services over the same Loop.

  • Heating, Ventilating and Air Conditioning General Office Area: The building shall be equipped with a combination heating, ventilation and air conditioning system. The system shall have ducted supply and return air. The space above the ceiling shall not be used as a supply or return plenum. The systems shall be sized in accordance with the

  • Interconnection Agreement Seller shall comply with the terms and conditions of the Interconnection Agreement.

  • Modification of the Small Generating Facility The Interconnection Customer must receive written authorization from the NYISO and Connecting Transmission Owner before making any change to the Small Generating Facility that may have a material impact on the safety or reliability of the New York State Transmission System or the Distribution System. Such authorization shall not be unreasonably withheld. Modifications shall be done in accordance with Good Utility Practice. If the Interconnection Customer makes such modification without the prior written authorization of the NYISO and Connecting Transmission Owner, the Connecting Transmission Owner shall have the right to temporarily disconnect the Small Generating Facility. If disconnected, the Small Generating Facility will not be reconnected until the unauthorized modifications are authorized or removed.

  • Utilities; Amenities The following utilities are included in the Total Rent set forth in this Agreement: Internet access and trash disposal. Resident will pay as additional Rent a pro-rata share (based on the number of contracted residents in possession for the applicable period) for the apartment's usage of electricity and water, applied pro-rata to any partial billing cycle. Resident will be responsible for his or her pro-rata share of electricity and water charges during the term of this Agreement, regardless of actual date of move-in or move-out. No refund or credit will be provided for usage below any applicable allowance levels. In connection with the administration of utility billing during the term of this Agreement, Resident will pay prior to occupying the assigned apartment (or on the first utility bill, at Owner's discretion), a single up-front billing service fee of up to $72.00 (or alternately, at Owner's option, a service fee of up to $6.00 per monthly bill) for administration, billing, overhead and similar expenses and charges incurred by Owner for providing utility allocations and billing services. Upon Resident's request, Owner will provide copies of applicable utility bills. At Owner's option, to the extent permitted by law, Resident may be pre-billed for the estimated amount of charges for any electricity and/or water bills anticipated to be received during the final 30 days of the term or after the end of the term of this Agreement, calculated based on historical electricity and/or water charges for the apartment and pursuant to applicable utility billing laws and regulations. As part of each utility bill, Resident may be charged and agrees to pay promptly to Owner any other miscellaneous charges billed by the utility provider and payable by the customer of record, plus late payment fees and/or NSF fees, as may be applicable, in the amounts stated in paragraph 2 of this Agreement, as liquidated estimates of costs incurred in connection with the administration and collection of late payment. Owner may elect to use one or more third-party service providers for providing, billing and/or servicing utility accounts; Resident acknowledges that such third-party providers are not utility providers. Owner makes no representations and hereby disclaims any and all warranties, express or implied, with respect to any utilities provided, including but not limited to those warranties concerning merchantability and fitness for a particular purpose or use, whether made allegedly by Owner or its representatives or agents, whether in writing or otherwise, except as otherwise expressly stated in this Agreement. Owner does not warrant or guarantee the protection of Resident's privacy during operation of utilities, that such utilities will satisfy Resident's requirements, or that the operation of utilities will be uninterrupted or error free. Resident acknowledges and agrees that neither Owner nor its affiliates, agents, employees or representatives will be responsible to Resident for any non-economic, consequential, incidental, indirect or special damages, including incidental, economic or punitive damages, arising from breach of warranty, breach of contract, negligence or any other legal ground of action, or by reason of the use, discontinuation or modification of any utilities or the termination of any utilities, whether arising from Resident's use of (or inability to use) utilities, or otherwise, even if Owner has been advised of the possibility of such damage. In the event that any utility service proves defective, or is discontinued or terminated, Owner's and Manager's entire combined liability and Resident's exclusive remedy will be limited to a reimbursement of the approximate cost of that utility incurred by Resident, prorated by the day for each day the utility service proved defective, or was discontinued or terminated, for more than 24 hours. Resident agrees to indemnify, defend and hold harmless Owner and its employees, affiliates and agents, from any and all losses, claims, damages, expenses, other liabilities and causes of action of every nature, including attorney fees, which arise directly or indirectly in connection with: (i) violation by Resident of any laws, ordinances, regulations or rules regarding the utilities; or (ii) illegal or inappropriate use of the utilities. Any damage or loss to any utility devices during Resident's occupancy will be charged to Resident (and the other resident(s) in the apartment, as applicable) at the replacement cost. Management will establish schedules and policies for the use of recreation facilities, amenities and other common spaces. Owner may add, remove, close (temporarily or permanently), upgrade or modify any of the recreation facilities, amenities or common spaces in Owner's discretion, without notice or compensation; provided that if this Agreement expressly includes a separate Amenity Fee, Resident's sole remedy will be limited to a pro-rata credit of such Amenity Fee for the period a covered amenity is closed or fully unavailable. SAMPLE

  • Sub-loop Elements 2.8.1 Where facilities permit, BellSouth shall offer access to its Unbundled Sub-Loop (USL) elements as specified herein.

  • Landlord and Storage Agreements Upon request, provide Agent with copies of all existing agreements, and promptly after execution thereof provide Agent with copies of all future agreements, between an Obligor and any landlord, warehouseman, processor, shipper, bailee or other Person that owns any premises at which any Collateral may be kept or that otherwise may possess or handle any Collateral.

  • Heating, Ventilation and Air Conditioning Landlord shall furnish to the Premises heating, ventilation and air-conditioning (“HVAC”) in accordance with the Design Standards set forth in Exhibit D during Ordinary Business Hours. Landlord shall have access to all air-cooling, fan, ventilating and machine rooms and electrical closets and all other mechanical installations of Landlord (collectively, “Mechanical Installations”), and Tenant shall not construct partitions or other obstructions which may interfere with Landlord’s access thereto or the moving of Landlord’s equipment to and from the Mechanical Installations. No Tenant Party shall at any time enter the Mechanical Installations or tamper with, adjust, or otherwise affect such Mechanical Installations. Landlord shall not be responsible if the HVAC System fails to provide cooled or heated air, as the case may be, to the Premises in accordance with the Design Standards by reason of (i) any equipment installed by, for or on behalf of Tenant, which has an electrical load in excess of the average electrical load and human occupancy factors for the HVAC System as designed, or (ii) any rearrangement of partitioning or other Alterations made or performed by, for or on behalf of Tenant. Tenant shall install, if missing, blinds or shades on all windows, which blinds and shades shall be subject to Landlord’s approval, and shall keep operable windows in the Premises closed, and lower the blinds when necessary because of the sun’s position, whenever the HVAC System is in operation or as and when required by any Requirement. Tenant shall cooperate with Landlord and shall abide by the rules and regulations which Landlord may reasonably prescribe for the proper functioning and protection of the HVAC System. Tenant acknowledges that the server room in the Premises currently has three heat pumps installed, being two 4-ton units, and one 2.5-ton unit (the “Existing Heat Pumps”). The 2.5-ton unit is currently connected and operational. Tenant shall determine whether it is satisfied with the condition of the Existing Heat Pumps and Landlord shall not have any responsibility or liability for the condition, operation, maintenance, repair or replacement of the Existing Heat Pumps. Tenant may operate the Existing Heat Pumps. Tenant shall be responsible for, and pay directly for, all necessary maintenance and repairs to the Existing Heat Pumps. Tenant shall reimburse Landlord monthly for the cost of all utility services used to operate the Existing Heat Pumps within 10 Business Days after receipt of Landlord’s invoice for such amount. Landlord may measure Tenant’s usage of such utility services by either a sub-meter or by other reasonable methods such as by temporary check meters or by survey. Tenant, at its cost, may replace the Existing Heat Pumps with one or more new heat pumps, provided, however, that the capacity of such replacement heat pump(s) shall not exceed the 10.5-ton capacity cooling capacity of the Existing Heat Pumps.

  • Heating and Air Conditioning Xxxxxx agrees to furnish to Lessee heating and air conditioning equipment and maintain same in satisfactory operating condition at all times for the Premises during the term of the Lease at the expense of Lessor. Xxxxxx agrees that thermostats in the Premises will be set to maintain an average zone temperature of 75 degrees Fahrenheit during the heating and cooling seasons.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!