Common use of Existing Ground Model Clause in Contracts

Existing Ground Model. 25 Developer shall create an integrated-model of the existing condition to create a digital terrain 26 model (DTM) using Bentley’s InRoads/Site/Survey Select CAD. The existing ground model must 27 include existing ground surface and subsurface elements (including the best available 28 information for: drainage structures, Utilities, and bridge and wall foundations), features utilizing 29 data from light detection and ranging (LiDAR), subsurface Utility evaluation, field surveys, and 30 existing plans data collection including currently available LiDAR or other existing ground 31 surface data (.dtm or .tin format). Developer shall verify the DTM for accuracy through field 32 procedures of locating well-defined and random check points (not included in the creation of the 33 DTM surface) systematically dispersed throughout the Site and compared to the DTM. 34 Developer shall comply with the requirements in the following manuals available from ADOT at 35 ▇▇▇▇://▇▇▇.▇▇▇▇▇.▇▇▇/business/engineering-and-construction/EngineeringSurvey in creating 36 DTMs: (1) Manual for Field Surveys, (2) Location Survey P-codes for Bentley InRoads, and (3) 37 General Specifications for Photogrammetric Mapping. Developer shall include the existing 38 ground model in both DTM and LandXML format with the 3D Models.

Existing Ground Model. 25 43 Developer shall create an integrated-model of the existing condition to create a digital terrain 26 44 model (DTM) using Bentley’s InRoads/Site/Survey Select CAD. The existing ground model must 27 1 include existing ground surface and subsurface elements (including the best available 28 2 information for: drainage structures, Utilities, and bridge and wall foundations), features utilizing 29 3 data from light detection and ranging (LiDAR), subsurface Utility evaluation, field surveys, and 30 4 existing plans data collection including currently available LiDAR or other existing ground 31 5 surface data (.dtm or .tin format). Developer shall verify the DTM for accuracy through field 32 6 procedures of locating well-defined and random check points (not included in the creation of the 33 7 DTM surface) systematically dispersed throughout the Site and compared to the DTM. 34 8 Developer shall comply with the requirements in the following manuals available from ADOT at 35 ▇▇▇▇://▇▇▇.▇▇▇▇▇.▇▇▇/business/engineering-and-construction/EngineeringSurvey in creating 36 10 DTMs: (1) Manual for Field Surveys, (2) Location Survey P-codes for Bentley InRoads, and (3) 37 11 General Specifications for Photogrammetric Mapping. Developer shall include the existing 38 12 ground model in both DTM and LandXML format with the 3D Models.

Existing Ground Model. 25 43 Developer shall create an integrated-model of the existing condition to create a digital terrain 26 44 model (DTM) using Bentley’s ▇▇▇▇▇▇▇’▇ InRoads/Site/Survey Select CAD. The existing ground model must 27 1 include existing ground surface and subsurface elements (including the best available 28 2 information for: drainage structures, Utilities, and bridge and wall foundations), features utilizing 29 3 data from light detection and ranging (LiDAR), subsurface Utility evaluation, field surveys, and 30 4 existing plans data collection including currently available LiDAR or other existing ground 31 5 surface data (.dtm or .tin format). Developer shall verify the DTM for accuracy through field 32 6 procedures of locating well-defined and random check points (not included in the creation of the 33 7 DTM surface) systematically dispersed throughout the Site and compared to the DTM. 34 8 Developer shall comply with the requirements in the following manuals available from ADOT at 35 ▇▇▇▇://▇▇▇.▇▇▇▇▇.▇▇▇/business/engineering-and-construction/EngineeringSurvey in creating 36 10 DTMs: (1) Manual for Field Surveys, (2) Location Survey P-codes for Bentley InRoads, and (3) 37 11 General Specifications for Photogrammetric Mapping. Developer shall include the existing 38 12 ground model in both DTM and LandXML format with the 3D Models.

Existing Ground Model. 25 35 Developer shall create an integrated-model of the existing condition to create a digital terrain 26 36 model (DTM) using Bentley’s InRoads/Site/Survey Select CAD. The existing ground model must 27 37 include existing ground surface and subsurface elements (including the best available 28 38 information for: drainage structures, Utilities, and bridge and wall foundations), features utilizing 29 39 data from light detection and ranging (LiDAR), subsurface Utility evaluation, field surveys, and 30 40 existing plans data collection including currently available LiDAR or other existing ground 31 41 surface data (.dtm or .tin format). Developer shall verify the DTM for accuracy through field 32 42 procedures of locating well-defined and random check points (not included in the creation of the 33 43 DTM surface) systematically dispersed throughout the Site and compared to the DTM. 34 44 Developer shall comply with the requirements in the following manuals available from ADOT at 35 1 ▇▇▇▇://▇▇▇.▇▇▇▇▇.▇▇▇/business/engineering-and-construction/EngineeringSurvey in creating 36 2 DTMs: (1) Manual for Field Surveys, (2) Location Survey P-codes for Bentley InRoads, and (3) 37 3 General Specifications for Photogrammetric Mapping. Developer shall include the existing 38 4 ground model in both DTM and LandXML format with the 3D Models.

Existing Ground Model. 25 43 Developer shall create an integrated-model of the existing condition to create a digital terrain 26 44 model (DTM) using Bentley’s InRoads/Site/Survey Select CAD. The existing ground model must 27 1 include existing ground surface and subsurface elements (including the best available 28 2 information for: drainage structures, Utilities, and bridge and wall foundations), features utilizing 29 3 data from light detection and ranging (LiDAR), subsurface Utility evaluation, field surveys, and 30 4 existing plans data collection including currently available LiDAR or other existing ground 31 5 surface data (.dtm or .tin format). Developer shall verify the DTM for accuracy through field 32 6 procedures of locating well-defined and random check points (not included in the creation of the 33 7 DTM surface) systematically dispersed throughout the Site and compared to the DTM. 34 8 Developer shall comply with the requirements in the following manuals available from ADOT at 35 9 ▇▇▇▇://▇▇▇.▇▇▇▇▇.▇▇▇/business/engineering-and-construction/EngineeringSurvey in creating 36 10 DTMs: (1) Manual for Field Surveys, (2) Location Survey P-codes for Bentley InRoads, and (3) 37 11 General Specifications for Photogrammetric Mapping. Developer shall include the existing 38 12 ground model in both DTM and LandXML format with the 3D Models.

Existing Ground Model. 25 18 Developer shall create an integrated-model of the existing condition to create a digital terrain 26 19 model (DTM) using Bentley’s InRoads/Site/Survey Select CAD. The existing ground model must 27 20 include existing ground surface and subsurface elements (including the best available 28 21 information for: drainage structures, Utilities, and bridge and wall foundations), features utilizing 29 22 data from light detection and ranging (LiDAR), subsurface Utility evaluation, field surveys, and 30 23 existing plans data collection including currently available LiDAR or other existing ground 31 24 surface data (.dtm or .tin format). Developer shall verify the DTM for accuracy through field 32 25 procedures of locating well-defined and random check points (not included in the creation of the 33 26 DTM surface) systematically dispersed throughout the Site and compared to the DTM. 34 27 Developer shall comply with the requirements in the following manuals available from ADOT at 35 28 ▇▇▇▇://▇▇▇.▇▇▇▇▇.▇▇▇/business/engineering-and-construction/EngineeringSurvey in creating 36 29 DTMs: (1) Manual for Field Surveys, (2) Location Survey P-codes for Bentley InRoads, and (3) 37 30 General Specifications for Photogrammetric Mapping. Developer shall include the existing 38 31 ground model in both DTM and LandXML format with the 3D Models.

Existing Ground Model. 25 17 Developer shall create an integrated-model of the existing condition to create a digital terrain 26 18 model (DTM) using Bentley’s ▇▇▇▇▇▇▇’▇ InRoads/Site/Survey Select CAD. The existing ground model must 27 19 include existing ground surface and subsurface elements (including the best available 28 20 information for: drainage structures, Utilities, and bridge and wall foundations), features utilizing 29 21 data from light detection and ranging (LiDAR), subsurface Utility evaluation, field surveys, and 30 22 existing plans data collection including currently available LiDAR or other existing ground 31 23 surface data (.dtm or .tin format). Developer shall verify the DTM for accuracy through field 32 24 procedures of locating well-defined and random check points (not included in the creation of the 33 25 DTM surface) systematically dispersed throughout the Site and compared to the DTM. 34 26 Developer shall comply with the requirements in the following manuals available from ADOT at 35 27 ▇▇▇▇://▇▇▇.▇▇▇▇▇.▇▇▇/business/engineering-and-construction/EngineeringSurvey in creating 36 28 DTMs: (1) Manual for Field Surveys, (2) Location Survey P-codes for Bentley InRoads, and (3) 37 29 General Specifications for Photogrammetric Mapping. Developer shall include the existing 38 30 ground model in both DTM and LandXML format with the 3D Models.