Fixed Equipment a) Inert gas system. The Owners warrants that the vessel has a working inert gas system and that the officers and crew are experienced in the operation of the system. The Owners further warrants that the vessel will arrive at load port with cargo tanks inerted when required by Charterers and that tanks will remain inerted throughout the voyage and during discharge. The vessel’s inert gas system shall fully comply with regulation 62, chapter 11-2 of the SOLAS Convention 1974 as modified by its protocol of 1978 and Owners’ undertake that such system shall be operated by the officers and crew in accordance with the operational procedures set out in the IMO publication entitled “Inert Gas System 1983” as may, from time to time, be amended. The Master may be requested by terminal personnel or independent inspector to breach the IGS for purpose of gauging, sampling, temperature determination and or determining the quantity of cargo remaining on board after discharge. The Master shall comply with these requests consistent with the safe operation of the vessel. If the Charterers so requires, the Owners shall arrange for the vessel’s tanks to be de-inerted to facilitate inspection, gauging and sampling. Any time taken in de-inerting, inspecting, gauging, sampling, and re-inerting thereafter shall count as on-hire.
b) Crude oil washing. The Owners warrant that the vessel is equipped with a fully functional crude oil washing system complying with the latest edition of the MARPOL, and have officers and crew skilled and competent in the operation of such a system. The Charterers shall have the right to require the vessel to crude oil wash the tanks in which the cargo is carried. The Owners agrees to conduct crude oil washing of all cargo tanks at discharge port(s) simultaneously with cargo discharge operations and the same is to be to the Charterers’ satisfaction.
Fixed Equipment. All fixed equipment will be serviced at the location(s) where they are installed. All fixed transmitting equipment will have a response to a reported outage with twenty-four (24) hours nominally. A list of the fixed equipment and the location(s) are included with these specifications.
Fixed Equipment. Requirements of Landlord’s Agri-Environment Schemes 8. Additional Terms Relating to Cultivation, Management and Conservation
Fixed Equipment. $200,000 Licensed Premises...................................... Replacement value, but not less than $600,000. All fire insurance policies shall name the City of New York as the sole insured. All fire insurance policies shall be marked "Premium Paid" and shall be submitted to the Commissioner for his approval and retention before delivery of this License.
Fixed Equipment. All non-fixed equipment will be maintained as specified above. In cases where the equipment must be removed and returned to the vendor’s facility, paragraph 2.15 applies. The equipment will be returned to the CMSD within five (5) working days and nominally from receipt of equipment. A listing of all communications equipment including spares is included with these specifications. The successful vendor will take full responsibility to maintain the CMSD system with all parts and labor required doing so, with the exception of batteries, antennas, and physically damaged units, included in the monthly rate quoted. Twenty-four (24) hour service must be available for the fixed equipment.
Fixed Equipment. Initial Schedule of Facilities and Fixed Equipment
Fixed Equipment. NORTH SITE
Fixed Equipment. The Trust shall have access to and use of the following equipment located within the areas described above: • Audio visual equipment • Servery facilities within the Guildhall • Wifi • Other equipment which the Trust may use from time to time with the agreement of the Council
Fixed Equipment. The next key component of the contract farming agreement should state the provisions regarding the fixed equipment to be used in the agreement.
Fixed Equipment. Equipment located at a radio site or at a County location and as described as fixed equipment in the Scope of Work and included in Exhibit H – Firmware and Software Maintenance Services Specifications.