General Completion Obligation Sample Clauses

General Completion Obligation. Where it is stated in the relevant Services and Works Agreement that clause 9.7 does not apply, the USP must: (a) diligently pursue completion of the USP Works; and (b) use reasonable endeavours to complete the USP Works within a reasonable time.
AutoNDA by SimpleDocs

Related to General Completion Obligation

  • Notification obligation If the Customer is unable to perform its duties as agreed, the Customer shall notify the Contractor in writing accordingly as soon as possible. The notice shall specify the reason for the problem and, to the extent possible, when the Customer will again be able to perform the agreed duty.

  • Parallel Operation Obligations Once the Small Generating Facility has been authorized to commence parallel operation, the Interconnection Customer shall abide by all rules and procedures pertaining to the parallel operation of the Small Generating Facility in the applicable control area, including, but not limited to: (1) the rules and procedures concerning the operation of generation set forth in the NYISO tariffs or ISO Procedures or the Connecting Transmission Owner’s tariff; (2) any requirements consistent with Good Utility Practice or that are necessary to ensure the safe and reliable operation of the Transmission System or Distribution System; and (3) the Operating Requirements set forth in Attachment 5 of this Agreement.

  • Cooperation obligations The Parties undertake to cooperate to allow the timely submission, examination, publication and defence of any dissertation or thesis for a degree which includes their Results or Background subject to the confidentiality and publication provisions agreed in this Consortium Agreement.

  • General Condition The Aircraft will: (a) be clean by international airline standards; (b) have installed the full complement of engines and other material equipment, parts and accessories and loose equipment required under the Agreed Maintenance Program and installed in the other Boeing/XxXxxxxxx Xxxxxxx MD-87 aircraft operated by Lessee (together with any additions and improvements thereto, or replacements thereof, effected pursuant to and in accordance with this Agreement) and be in a condition suitable for immediate operation in commercial service; (c) be airworthy, conform to type design and be in a condition for safe operation with all equipment, components and systems operating in accordance with their intended use and within limits established by the manufacturer and approved by the Aviation Authority, and all pilot discrepancies and deferred maintenance items cleared on a terminating action basis; (d) have a U.S. Standard Transport Category Certificate of Airworthiness issued by the FAA in accordance with FAR Part 129 (or if required by the Lessor, be eligible for a valid export certificate of airworthiness with respect to the Aircraft issued by the Aviation Authority) and unconditionally meet all FAA requirements for immediate operations under FAR Part 129; (e) comply with the manufacturer's original specification to the extent that it so complied on the date of this Agreement and subject to any alterations made pursuant to and in accordance with this Agreement after such date; (f) have undergone, immediately prior to redelivery, the MSG-3 equivalent of a "C" Check in accordance with the Agreed Maintenance Program so that all Airframe inspections falling due within the next 3,000 hours, 3,000 cycles or twelve months (whichever is applicable and most limiting) of operation in accordance with the Agreed Maintenance Program have been accomplished; (g) if the Flight Hours of the Airframe remaining until the scheduled completion of the Major Checks (collectively, a "Complete Heavy Work Package") on the Expiry Date are: (i) less than on the Delivery Date, then the Lessee shall pay to the Lessor an amount equal to the product of (a) the number of Flight Hours remaining until the scheduled completion of a Complete Heavy Work Package as of the Expiry Date that are less than the number of Flight Hours that were remaining until the scheduled completion of a Complete Heavy Work Package as of the Delivery Date (b) multiplied by US$50.00, provided, however, that no payment shall be due from -------- ------- Lessee under this clause (g)(i) if, immediately preceding the redelivery of the Aircraft, the Lessee has performed a Complete Heavy Work Package; (ii) more than on the Delivery Date, then the Lessor shall pay to the Lessee an amount equal to the product of (a) the number of Flight Hours remaining until the scheduled completion of a Complete Heavy Work Package as of the Expiry Date that are more than the number of Flight Hours that were remaining until the scheduled completion of a Complete Heavy Work Package as of the Delivery Date (b) multiplied by US$50.00; For the avoidance of doubt, any amounts due to the Lessor pursuant to this clause (g) may be set off against any amounts due to Lessee pursuant to paragraphs (b) or (d) of Schedule 10 and a payment made for the net amount due; (h) have complied with all airworthiness directives and mandatory orders affecting that model of Aircraft issued by the Aviation Authority (and, if different, the FAA) that are required terminating action during the Term; (i) no special or unique manufacturer inspection or check requirements specific to the Aircraft will exist unless there is no terminating action available from any source; (j) have installed all applicable vendor's and manufacturer's service bulletin kits received free of charge by the Lessee that are appropriate for the Aircraft and, to the extent not installed, those kits which have been received with respect to this Aircraft will be furnished free of charge to the Lessor; (k) be free of any system-related leaks which are outside maintenance manual limitations; (l) all fluid reservoirs (including fuel, oil, oxygen, hydraulic and water) will be full, and the waste tank serviced in accordance with the manufacturer's instructions; (m) if required under the Approved Maintenance Program, all fuel tanks will have recently undergone an anti-fungus/biological growth contamination laboratory evaluation, and any excessive levels of contamination corrected; (n) have an FAA-approved aging aircraft program in operation and up-to-date; and (o) have all signs and decals clean, secure and legible.

  • General Conditions Costs Contractor is entitled to receive payment for the actual cost of the allowable General Conditions items incurred after receipt of a Notice to Proceed with Construction from Owner through Substantial Completion of the Project, plus 30 calendar days. Contractor is not entitled to reimbursement for General Conditions Costs incurred before receipt of the Notice to Proceed. General Conditions Costs incurred after Substantial Completion, plus 30 calendar days, must be approved in advance by Owner. Allowable General Conditions items are identified below and in Exhibit “D” attached to this Agreement. These items shall be included in the General Conditions Cost amount shown as a line item in the Guaranteed Maximum Price Proposal and as detailed on the Schedule of Values. Items not specifically included below or in Exhibit “D” will not be allowed as General Condition Costs.

  • Notification Obligations (a) If by reason of a Political Event or Change in Law a Party is wholly or partially unable to carry out its obligations under this Agreement, the affected Party shall: (i) give each other Party notice of the Political Event or Change in Law as soon as practicable, but in any event, not later than three (3) Days after the affected Party became aware, or should have become aware, of the occurrence of the Political Event or Change in Law or six (6) hours after the resumption of any means of providing notice between the Company and the GOB, whichever is later; and (ii) give each other Party a second notice, describing the Political Event or Change in Law in reasonable detail and, to the extent that can be reasonably determined at the time of the second notice, providing a preliminary evaluation of the obligations affected, a preliminary estimate of the period of time that the affected Party will be unable to perform the obligations, and other relevant matters as soon as practicable, but in any event, not later than seven (7) Days after the initial notice of the occurrence of the Political Event or Change in Law is given by the affected Party. When appropriate or when reasonably requested to do so by any other Party, the affected Party shall provide further notices to the other Party more fully describing the Political Event or Change in Law and its cause and providing or updating information relating to the efforts of the affected Party to avoid and/or to mitigate the effect(s) thereof and estimates, to the extent practicable, of the time that the affected Party reasonably expects it will be unable to carry out any of its affected obligations due to the Political Event or Change in Law. (b) The affected Party shall also provide notice to each other Party of: (i) with respect to an ongoing Political Event or Change in Law the cessation of the Political Event or Change in Law; and (ii) its ability to recommence performance of its obligations under this Agreement, as soon as possible, but in any event, not later than seven (7) Days after the occurrence of each of (i) and (ii) above. (c) Failure by the affected Party to give notice of a Political Event or Change in Law to the other Parties within the ten (10) Day period or one (1) Business Day period required by Section 11A.2(a) shall not prevent the affected Party from giving such notice at a later time; provided, that in such case, the affected Party shall not be excused pursuant to Section 11A.4 for any failure or delay in complying with its obligations under or pursuant to this Agreement until the notice required by Section 11A.2(a)(i) has been given; and if such notice is given within the three (3) Day period or six (6) hour period as required by Section 11A.2(a)(i), the affected Party shall be excused for such failure or delay pursuant to Section 11A.4 from the date of commencement of the relevant Political Event or Change in Law.

  • Director Notification Obligation If the Participant is a director of the Corporation’s Malaysian Affiliate, the Participant is subject to certain notification requirements under the Malaysian Companies Act. Among these requirements is an obligation to notify the Malaysian Affiliate in writing when the Participant receives or disposes of an interest (e.g., an Award or shares) in the Corporation or any related company. Such notifications must be made within 14 days of receiving or disposing of any interest in the Corporation or any related company.

  • Termination Obligations The Supplier shall comply with all of its obligations contained in the Exit Plan. Upon termination or expiry (as the case may be) or at the end of the Termination Assistance Period (or earlier if this does not adversely affect the Supplier's performance of the Ordered Panel Services and the Termination Assistance and its compliance with the other provisions of this Contract Schedule 2), the Supplier shall: cease to use the Customer Data; provide the Customer and/or the Replacement Supplier with a complete and uncorrupted version of the Customer Data in electronic form (or such other format as reasonably required by the Customer); erase from any computers, storage devices and storage media that are to be retained by the Supplier after the end of the Termination Assistance Period all Customer Data and promptly certify to the Customer that it has completed such deletion; return to the Customer such of the following as is in the Supplier's possession or control: all materials created by the Supplier under this Legal Services Contract in which the IPRs are owned by the Customer; any equipment which belongs to the Customer; any items that have been on-charged to the Customer, such as consumables; and any sums prepaid by the Customer in respect of Ordered Panel Services not delivered by the Expiry Date; vacate any Customer Premises; remove the Supplier Equipment together with any other materials used by the Supplier to supply the Ordered Panel Services and shall leave the sites in a clean, safe and tidy condition. The Supplier is solely responsible for making good any damage to the sites or any objects contained thereon, other than fair wear and tear, which is caused by the Supplier and/or any Supplier Personnel; provide access during normal working hours to the Customer and/or the Replacement Supplier for up to twelve (12) Months after expiry or termination to: such information relating to the Ordered Panel Services as remains in the possession or control of the Supplier; and such members of the Supplier Personnel as have been involved in the design, development and provision of the Ordered Panel Services and who are still employed by the Supplier, provided that the Customer and/or the Replacement Supplier shall pay the reasonable costs of the Supplier actually incurred in responding to requests for access under this paragraph. Upon termination or expiry (as the case may be) or at the end of the Termination Assistance Period (or earlier if this does not adversely affect the Supplier's performance of the Ordered Panel Services and the Termination Assistance and its compliance with the other provisions of this Contract Schedule 2), each Party shall return to the other Party (or if requested, destroy or delete) all Confidential Information of the other Party and shall certify that it does not retain the other Party's Confidential Information save to the extent (and for the limited period) that such information needs to be retained by the Party in question for the purposes of providing or receiving any Ordered Panel Services or termination services or for statutory compliance purposes. Except where this Contract provides otherwise, all licences, leases and authorisations granted by the Customer to the Supplier in relation to the Ordered Panel Services shall be terminated with effect from the end of the Termination Assistance Period.

  • No Mitigation Obligation The Company hereby acknowledges that it will be difficult, and may be impossible, for the Executive to find reasonably comparable employment following the Date of Termination. The payment of the severance compensation by the Company to the Executive in accordance with the terms of this Agreement will be liquidated damages, and the Executive will not be required to mitigate the amount of any payment provided for in this Agreement by seeking other employment or otherwise, nor will any profits, income, earnings, or other benefits from any source whatsoever create any mitigation, offset, reduction, or any other obligation on the part of the Executive hereunder or otherwise.

  • Mitigation Obligations If any Lender requests compensation under Section 9.03, or if the Borrower is required to pay any additional amount to any Lender or any Governmental Authority for the account of any Lender pursuant to Section 9.05, then such Lender shall use reasonable efforts to designate a different lending office for funding or booking its Loans hereunder or to assign its rights and obligations hereunder to another of its offices, branches or affiliates, if, in the judgment of such Lender, such designation or assignment (i) would eliminate or reduce amounts payable pursuant to Section 9.03 or 9.05, as the case may be, in the future and (ii) would not subject such Lender to any unreimbursed cost or expense and would not otherwise be disadvantageous to such Lender. The Borrower hereby agrees to pay all reasonable costs and expenses incurred by any Lender in connection with any such designation or assignment.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!