Common use of GENERAL REQUIREMENTS FOR SUBMITTALS Clause in Contracts

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) Unless otherwise specified by the Authority, Project Co will: (1) deliver 5 printed copies of each Submittal to the Authority, together with electronic copies in both Autodesk Design Review ‘DWF’ and Adobe Reader ‘PDF’ format; and (2) post an electronic copy of each Submittal (in a format acceptable to the Authority) on an internet-based system that is established by Project Co for the Project and accessible to Authority staff. (b) All Submittals will be in English. (c) All Submittals required by this Agreement, by applicable Law or Good Industry Practice to be signed or sealed by persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed. (d) All Submittals will refer to the relevant provisions of the Design and Construction Specifications, the Services Protocols and Specifications (if applicable) and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming that the Submittals comply with, or identifying any elements of the Facility that for any reason vary from, the requirements of the Project Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]. (e) All Submittals will be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include: (1) a list of all attached Submittals; (2) a description of: (A) the purpose of the Submittal(s) (including whether the Submittal is being submitted for review by the User Consultation Group for review under Section 5 of this Appendix or for other purposes); (B) the specific item or items in the Submittal that is subject to review by the Authority or the User Consultation Group; and (C) Project Co’s expectations for the Authority’s review of the Submittal and Project Co’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal; (3) if the Submittal is submitted as part of the Design phases described in Section 4.2 of Schedule 2 [Design and Construction Protocols], a report for the Submittal including the information described in Section 4.2(c)(10) of Schedule 2 as applicable to that Submittal; (4) for each Submittal: (A) the document number(s) or drawing number(s); (B) revision numbers (if applicable); (C) document or drawing title(s); (D) name of entity that prepared the Submittal; (E) the Submittal history showing date and delivery information and/or log number of all previous submissions of that Submittal; and (F) identification of any previous Submittal superseded by the current Submittal. (f) Project Co will compile and maintain a register of the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereon.

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) Unless otherwise specified by the AuthorityOwner, Project Co will: (1) will deliver 5 printed copies of each Submittal Submittals to the AuthorityOwner, together with electronic copies at the address or addresses specified by the Owner, in both Autodesk the number of copies and in the format required under Section 2.5 of Schedule 3 [Design Review ‘DWF’ and Adobe Reader ‘PDF’ format; and (2) post an electronic copy of each Submittal (in a format acceptable to the Authority) on an internet-based system that is established by Project Co for the Project and accessible to Authority staffConstruction Specifications]. (b) All Submittals will be in English. (c) All Submittals required by this Agreement, by applicable Law or Good Industry Practice to be signed or sealed by persons Persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed. (d) All Submittals will refer to the relevant provisions of the Design and Construction Specifications, the Services Protocols and Specifications (if applicable) and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming that the Submittals comply with, or identifying any elements of the Facility that for any reason vary from, the requirements of the Project Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]. (e) All Submittals will be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include: (1) a list of all attached Submittals; (2) a description of: (A) the purpose of the Submittal(s) (), including Project Co's expectations for the Owner's review of the Submittal and whether the Submittal is being submitted for review by the User Consultation Group for review under Section 5 of this Appendix or for other purposes); (B) the specific item or items in the Submittal that is subject to review by the Authority or the User Consultation Group; and (C) Project Co’s expectations for the Authority’s review of the Submittal and Project Co’s 's proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal; and (C) the specific item or items in the Submittal that are the subject of the review; (3) if the Submittal is submitted as part of the Design phases described in Section 4.2 of Schedule 2 [Design and Construction Protocols], a report for the Submittal including the information described in Section 4.2(c)(10) of Schedule 2 as applicable to that Submittal; (4) for each Submittal: (A) the document number(s) or drawing number(s); (B) revision numbers (if applicable); (C) document or drawing title(s); (D) name of entity that prepared the Submittal; (E) the Submittal history showing date and delivery information and/or log number of all previous submissions of that Submittal; and (F) identification of any previous Submittal superseded by the current Submittal. (f) Project Co will compile and maintain a register of the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereon.

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) Unless otherwise specified by the Authority, Project Co will: (1) deliver 5 printed copies of each Submittal to the Authority, at the address or addresses specified by the Authority, 3 full printed copies separated into 3 separate collated sets (plus single sheets/sets at the request of the Authority and confirmed prior to each stage of Submittals) of each Submittal, together with an electronic copies copy in both Autodesk Design Review ‘DWF’ and Adobe Reader ‘PDF’ formata format acceptable to the Authority; and (2) post an electronic copy of each Submittal (in a format acceptable to the Authority) on an the Aconex internet-based system that is established by Project Co the Authority for the Project and accessible to Project Co and the Authority staff. (b) All Submittals will be in English. (c) All Submittals required by this Agreement, by applicable Law or Good Industry Practice to be signed or sealed by persons Persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed. (d) All Submittals will refer to the relevant provisions of the Design and Construction Specifications, the Services Protocols and Specifications (if applicable) and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming that the Submittals comply with, or identifying any elements of the Facility that for any reason vary from, the requirements of the Project Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]. (e) All Submittals will be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include: (1) a list of all attached Submittals; (2) a description of: (A) the purpose of the Submittal(s) (including whether the Submittal is being submitted for review by the User Consultation Group Group, for review under Section 5 of this Appendix or for other purposes); (B) the specific item or items in component of the Submittal Design that is subject to review by the Authority or the User Consultation Group; (C) the specific item or items in the Submittal that are the subject of the review; and (CD) Project Co’s expectations for the Authority’s review of the Submittal and Project Co’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal; (3) if the Submittal is submitted as part of the Design phases described in Section 4.2 5.3 of Schedule 2 [Design and Construction Protocols], a report for the Submittal including the information described in Section 4.2(c)(105.3(c)(10) of Schedule 2 [Design and Construction Protocols] as applicable to that Submittal; (4) for each Submittal: (A) the document number(s) or drawing number(s); (B) revision numbers (if applicable); (C) document or drawing title(s); (D) name of entity that prepared the Submittal; (E) the Submittal history showing date and delivery information and/or log number of all previous submissions of that Submittal; and (F) identification of any previous Submittal superseded by the current Submittal. (f) Project Co will compile and maintain a register of the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereon.

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) Unless otherwise specified by the AuthorityProvince, Project Co will: (1) deliver 5 five printed copies of each Submittal to the AuthorityProvince at a location specified by the Province, together with an electronic copies copy in both Autodesk Design Review ‘DWF’ and Adobe Reader ‘PDF’ formata format acceptable to the Province; and (2) post an electronic copy of each Submittal (in a format acceptable to the AuthorityProvince) on an internet-based system that is established by Project Co for the Project and accessible to Authority Project Co and the Province staff. (b) The review time limit will start once all components are received, including printed copies. (c) All Submittals will be in English. (cd) All Submittals required by this Agreement, by applicable Law or Good Industry Practice to be signed or sealed by persons Persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed. (de) All Submittals required by this Agreement will be reviewed and the work of all disciplines shall be coordinated by Project Co. Each Submittal will include written confirmation of such review and coordination by Project Co’s Design and Construction Representative. (f) All Submittals will refer to the relevant provisions of the Design and Construction Specifications, the Services Protocols and Specifications (if applicable) and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming that the Submittals comply with, or identifying any elements of the Facility that for any reason vary from, the requirements of the Project Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]. (eg) All Submittals will be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include: (1) a list of all attached Submittals; (2) a description of: (A) the purpose of the Submittal(s) (including whether the Submittal is being submitted for review by the User Consultation Group Groups, for review under Section 5 of this Appendix or for other purposes); (B) the component of the Design that is subject to review by the Province or the User Consultation Groups; (C) the specific item or items in the Submittal that is are the subject to of the review by that have been updated since the Authority or the User Consultation Groupprevious Submittal; and (CD) Project Co’s expectations for the AuthorityProvince’s review of the Submittal and Project Co’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal; (3) if the Submittal is submitted as part of the Design phases described in Section 4.2 5.3 of Schedule 2 [Design and Construction Protocols], a report for the Submittal including the information described in Section 4.2(c)(105.3(c)(10) of Schedule 2 [Design and Construction Protocols] as applicable to that Submittal; (4) for each Submittal: (A) the document number(s) or drawing number(s); (B) revision numbers (if applicable); (C) document or drawing title(s); (D) name of entity that prepared the Submittal; (E) the Submittal history showing date and delivery information and/or log number of all previous submissions of that Submittal; and (F) identification of any previous Submittal superseded by the current Submittal. (fh) Project Co will compile and maintain a register of the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereon.

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) Unless otherwise specified by the Authority, Project Co will: (1) deliver 5 printed copies of each Submittal to the Authority, together with an electronic copies copy in both Autodesk Design Review ‘DWF’ and Adobe Reader ‘PDF’ formata format acceptable to the Authority; and (2) post an electronic copy of each Submittal (in a format acceptable to the Authority) on an internet-based system that is established by Project Co for the Project and accessible to Authority staff. (b) All Submittals will be in English. (c) All Submittals required by this Agreement, by applicable Law or Good Industry Practice to be signed or sealed by persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed. (d) All Submittals will refer to the relevant provisions of the Design and Construction Specifications, the Services Protocols and Specifications (if applicable) and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming that the Submittals comply with, or identifying any elements of the Facility that for any reason vary from, the requirements of the Project Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]. (e) All Submittals will be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include: (1) a list of all attached Submittals; (2) a description of: (A) the purpose of the Submittal(s) (including whether the Submittal is being submitted for review by the User Consultation Group for review under Section 5 of this Appendix or for other purposes); (B) the specific item or items in component of the Submittal Design that is subject to review by the Authority or the User Consultation Group; (C) the specific item or items in the Submittal that are the subject of the review; and (CD) Project Co’s expectations for the Authority’s review of the Submittal and Project Co’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal; (3) if the Submittal is submitted as part of the Design phases described in Section 4.2 5.3 of Schedule 2 [Design and Construction Protocols], a report for the Submittal including the information described in Section 4.2(c)(105.3(c)(10) of Schedule 2 [Design and Construction Protocols] as applicable to that Submittal; (4) for each Submittal: (A) the document number(s) or drawing number(s); (B) revision numbers (if applicable); (C) document or drawing title(s); (D) name of entity that prepared the Submittal; (E) the Submittal history showing date and delivery information and/or log number of all previous submissions of that Submittal; and (F) identification of any previous Submittal superseded by the current Submittal. (f) Project Co will compile and maintain a register of the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereon.

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) 2.1 Unless otherwise specified by this Agreement or by the AuthorityOwner, Project Co will: (1) deliver 5 printed copies of each Submittal to the Authority, together with electronic copies in both Autodesk Design Review ‘DWF’ and Adobe Reader ‘PDF’ format; and (2) post Design-Builder will issue an electronic copy of each Submittal (in a .pdf format acceptable or other format agreed by the parties acting reasonably. Unless otherwise required by this Agreement or by applicable Law to be signed or sealed at the time the Submittal is first provided to the AuthorityOwner, upon assignment of the comment “REVIEWED” by the Owner of each Submittal the Design-Builder will issue a paper copy (or an electronically sealed copy if agreed by the Owner) on an internetof the Submittal that has been sealed by the Design-based system that is established Builder’s Consultant as required by Project Co for the Project and accessible to Authority staffSection 2.4 below. (b) 2.2 The Design-Builder will compile and maintain a Submittal log that includes the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereon. 2.3 All Submittals will be in English. (c) 2.4 All Submittals Submittals, and all amended versions of Submittals, required by this Agreement, Agreement or by applicable Law or Good Industry Practice to be signed or sealed by persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed, and will include confirmation by such person or persons that the Work proposed by the Submittal meets the requirements of this Agreement, including the Statement of Requirements. (d) 2.5 All Submittals will refer include all documents to the relevant provisions of the Design and Construction Specifications, the Services Protocols and Specifications (if applicable) and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming that the Submittals comply with, or identifying any elements of the Facility that for any reason vary from, the requirements of the Project Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]. (e) All Submittals will be clearly identified as a Submittal reviewed and will be delivered with appropriate covering documentation, which will include: (1) a list of all attached Submittals; (2) a description of: (A) clearly identify the purpose of the Submittal(s) (including whether Submittal, the Submittal is being submitted for review by the User Consultation Group for review under Section 5 of this Appendix or for other purposes); (B) the specific item or items in the Submittal that is subject to review by the Authority or the User Consultation Group; and (C) Project Co’s expectations for the Authority’s review of the Submittal and Project CoDesign-Builder’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal;. (3) if 2.6 All Submittals will refer to the Submittal is submitted as part of the Design phases described in Section 4.2 relevant provisions of Schedule 2 [Design 1 – Statement of Requirements and Construction Protocols], a report for the Submittal including the information described in Section 4.2(c)(10) of Schedule 2 as applicable to any matter that Submittal; (4) for each Submittalhas previously been subject to review. All Submittals will: (Aa) be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include a list of all attached Submittals and for each Submittal the document number(s) or drawing number(s); (Bb) include revision numbers (if applicable); (Cc) include document or drawing title(s); (Dd) include the name of entity that prepared the Submittal;; and (Ee) include details of the Submittal history log showing date and delivery information and/or log number of all previous submissions of that Submittal; and (F) identification of any previous Submittal superseded by the current Submittal. (f) Project Co will compile , and maintain a register description of the date, contents and status portions of the submission Submittal that are the subject of all Submittals, including the date of receipt and content of all returned Submittals and comments thereonreview.

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) 2.1 Unless otherwise specified by the AuthorityOwner, Project Co the Design-Builder will: (1a) deliver 5 3 printed copies of each Submittal to the AuthorityOwner, together with an electronic copies copy (CD or USB flash drive) in both Autodesk Design Review ‘DWF’ and Adobe Reader ‘PDF’ formata format acceptable to the Owner; and (2b) post an the electronic copy of each Submittal (in a format acceptable to the AuthorityOwner) on an Aconex or other an internet-based system that is established by Project Co the Owner for the Project and accessible to Authority the Owner and Design-Builder staff. (b) 2.2 All Submittals will be in English. (c) 2.3 All Submittals required by this Agreement, Agreement or by applicable Law or Good Industry Practice to be signed or sealed by persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed. (d) 2.4 All Submittals will refer to the relevant provisions of the Design and Construction Specifications, the Services Protocols and Specifications (if applicable) Statement of Requirements and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming that the Submittals comply with, or identifying any elements of the Facility that for any reason vary from, the requirements of the Project this Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]including the Statement of Requirements. (e) 2.5 All Submittals will be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include: (1a) a list of all attached Submittals; (2b) a description of: (Ai) the purpose of the Submittal(s) (including whether the Submittal is being submitted for review by the User Consultation Group for review under Section 5 of this Appendix or for other purposes); (Bii) the component of the Design that is subject to review by the Owner or the User Consultation Group; (iii) the specific item or items in the Submittal that is are the subject to review by of the Authority or the User Consultation Groupreview; and (Civ) Project Cothe Design-Builder’s expectations for the AuthorityOwner’s review of the Submittal and Project Cothe Design-Builder’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal; (3c) if the Submittal is submitted as part of the Design phases stages described in Section 4.2 of Schedule 2 [Design and Construction Protocols]17, a report for the Submittal including the information described in Section 4.2(c)(10) of Schedule 2 17 as applicable to that Submittal; (4d) for each Submittal: (Ai) the document number(s) or drawing number(s); (Bii) revision numbers (if applicable); (Ciii) document or drawing title(s); (Div) name of entity that prepared the Submittal; (Ev) any changes between draft Submittals and formal Submittals will be clearly identified; (vi) the Submittal history showing date and delivery information and/or log number of all previous submissions of that Submittal; and (Fvii) identification of any previous Submittal superseded by the current Submittal. (f) Project Co 2.6 The Design-Builder will compile and maintain a register of the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereon.

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) 2.1 Unless otherwise specified by this Agreement or by the AuthorityOwner, Project Co will: (1) deliver 5 printed copies of each Submittal to the Authority, together with electronic copies in both Autodesk Design Review ‘DWF’ and Adobe Reader ‘PDF’ format; and (2) post Design-Builder will issue an electronic copy of each Submittal (in a .pdf format acceptable to or other format agreed by the Authority) on an internet-based system that is established by Project Co for the Project and accessible to Authority staff. (b) All Submittals will be in English. (c) All Submittals parties acting reasonably. Unless otherwise required by this Agreement, Agreement or by applicable Law or Good Industry Practice to be signed or sealed by persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed. (d) All Submittals will refer to at the relevant provisions of the Design and Construction Specifications, the Services Protocols and Specifications (if applicable) and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming that the Submittals comply with, or identifying any elements of the Facility that for any reason vary from, the requirements of the Project Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]. (e) All Submittals will be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include: (1) a list of all attached Submittals; (2) a description of: (A) the purpose of the Submittal(s) (including whether time the Submittal is being submitted for review first provided to the Owner, upon assignment of the comment “REVIEWED” by the User Consultation Group for review under Section 5 Owner of this Appendix each Submittal the Design-Builder will issue a paper copy (or for other purposes); (Ban electronically sealed copy if agreed by the Owner) the specific item or items in of the Submittal that is subject to review has been sealed by the Authority or the User Consultation Group; and (C) Project CoDesign-Builder’s expectations for the Authority’s review of the Submittal and Project Co’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal; (3) if the Submittal is submitted Consultant as part of the Design phases described in required by Section 4.2 of Schedule 2 [Design and Construction Protocols], a report for the Submittal including the information described in Section 4.2(c)(10) of Schedule 2 as applicable to that Submittal; (4) for each Submittal: (A) the document number(s) or drawing number(s); (B) revision numbers (if applicable); (C) document or drawing title(s); (D) name of entity that prepared the Submittal; (E) the Submittal history showing date and delivery information and/or log number of all previous submissions of that Submittal; and (F) identification of any previous Submittal superseded by the current Submittal2.4 below. (f) Project Co 2.2 The Design-Builder will compile and maintain a register Submittal log that includes the date, contents and status of the submission of all Submittals, including the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereon. 2.3 All Submittals will be in English. 2.4 All Submittals, and all amended versions of Submittals, required by this Agreement or by applicable Law to be signed or sealed by individuals with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed, and will include confirmation by such individual or individuals that the Work proposed by the Submittal meets the requirements of this Agreement, including the Statement of Requirements. 2.5 All Submittals will include all documents to be reviewed and will clearly identify the purpose of the Submittal, the Design-Builder’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal. 2.6 All Submittals will refer to the relevant provisions of Schedule 1 – Statement of Requirements and to any matter that has previously been subject to review. All Submittals will: (a) be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include a list of all attached Submittals and for each Submittal the document number(s) or drawing number(s); (b) include revision numbers (if applicable); (c) include document or drawing title(s); (d) include name of entity that prepared the Submittal; and (e) include details of the Submittal log showing date and delivery information and/or log number of all previous submissions of that Submittal; identification of any previous Submittal superseded by the current Submittal, and a description of the portions of the Submittal that are the subject of review.

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) 2.1 Unless otherwise specified by this Agreement or by the AuthorityOwner, Project Co will: (1) deliver 5 printed copies of each Submittal to the Authority, together with electronic copies in both Autodesk Design Review ‘DWF’ and Adobe Reader ‘PDF’ format; and (2) post Design-Builder will issue an electronic copy of each Submittal (in a .pdf format acceptable or other format agreed by the parties acting reasonably. Unless otherwise required by this Agreement or by applicable Law to be signed or sealed at the time the Submittal is first provided to the AuthorityOwner, upon assignment of the comment “REVIEWED” by the Owner of each Submittal the Design- Builder will issue a paper copy (or an electronically sealed copy if agreed by the Owner) on an internetof the Submittal that has been sealed by the Design-based system that is established Builder’s Consultant as required by Project Co for the Project and accessible to Authority staffSection 2.4 below. (b) 2.2 The Design-Builder will compile and maintain a Submittal log that includes the date, contents and status of the submission of all Submittals, including the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereon. 2.3 All Submittals will be in English. (c) 2.4 All Submittals Submittals, and all amended versions of Submittals, required by this Agreement, Agreement or by applicable Law or Good Industry Practice to be signed or sealed by persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed. (d) All Submittals will refer to the relevant provisions of the Design , and Construction Specifications, the Services Protocols and Specifications (if applicable) and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming confirmation by such person or persons that the Submittals comply with, or identifying any elements of Work proposed by the Facility that for any reason vary from, Submittal meets the requirements of the Project Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]including the Statement of Requirements. (e) 2.5 All Submittals will include all documents to be clearly identified as a Submittal reviewed and will be delivered with appropriate covering documentation, which will include: (1) a list of all attached Submittals; (2) a description of: (A) clearly identify the purpose of the Submittal(s) (including whether Submittal, the Submittal is being submitted for review by the User Consultation Group for review under Section 5 of this Appendix or for other purposes); (B) the specific item or items in the Submittal that is subject to review by the Authority or the User Consultation Group; and (C) Project Co’s expectations for the Authority’s review of the Submittal and Project CoDesign-Builder’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal;. (3) if 2.6 All Submittals will refer to the Submittal is submitted as part of the Design phases described in Section 4.2 relevant provisions of Schedule 2 [Design 1 – Statement of Requirements and Construction Protocols], a report for the Submittal including the information described in Section 4.2(c)(10) of Schedule 2 as applicable to any matter that Submittal; (4) for each Submittalhas previously been subject to review. All Submittals will: (Aa) be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include a list of all attached Submittals and for each Submittal the document number(s) or drawing number(s); (Bb) include revision numbers (if applicable); (Cc) include document or drawing title(s); (Dd) include name of entity that prepared the Submittal; (Ee) include details of the Submittal history log showing date and delivery information and/or log number of all previous submissions of that Submittal; and (F) identification of any previous Submittal superseded by the current Submittal. (f) Project Co will compile , and maintain a register description of the date, contents and status portions of the submission Submittal that are the subject of all Submittals, including the date of receipt and content of all returned Submittals and comments thereonreview.

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) 2.1 Unless otherwise specified by this Agreement or by the Authority, Project Co will: (1) deliver 5 printed copies of each Submittal to the Authority, together with electronic copies in both Autodesk Design Review ‘DWF’ and Adobe Reader ‘PDF’ format; and (2) post Design-Builder will issue an electronic copy of each Submittal (in a .pdf format acceptable or other format agreed by the parties acting reasonably. Unless otherwise required by this Agreement or by applicable Law to be signed or sealed at the time the Submittal is first provided to the Authority, upon assignment of the comment “REVIEWED” by the Authority of each Submittal the Design-Builder will issue a paper copy (or an electronically sealed copy if agreed by the Authority) on an internetof the Submittal that has been sealed by the Design-based system that is established Builder’s Consultant as required by Project Co for the Project and accessible to Authority staffSection 2.4 below. (b) 2.2 The Design-Builder will compile and maintain a Submittal log that includes the date, contents and status of the submission of all Submittals, including the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereon. 2.3 All Submittals will be in English. (c) 2.4 All Submittals Submittals, and all amended versions of Submittals, required by this Agreement, Agreement or by applicable Law or Good Industry Practice to be signed or sealed by persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed. (d) All Submittals will refer to the relevant provisions of the Design , and Construction Specifications, the Services Protocols and Specifications (if applicable) and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming confirmation by such person or persons that the Submittals comply with, or identifying any elements of Work proposed by the Facility that for any reason vary from, Submittal meets the requirements of the Project Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]including the Statement of Requirements. (e) 2.5 All Submittals will include all documents to be clearly identified as a Submittal reviewed and will be delivered with appropriate covering documentation, which will include: (1) a list of all attached Submittals; (2) a description of: (A) clearly identify the purpose of the Submittal(s) (including whether Submittal, the Submittal is being submitted for review by the User Consultation Group for review under Section 5 of this Appendix or for other purposes); (B) the specific item or items in the Submittal that is subject to review by the Authority or the User Consultation Group; and (C) Project Co’s expectations for the Authority’s review of the Submittal and Project CoDesign-Builder’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal;. (3) if 2.6 All Submittals will refer to the Submittal is submitted as part of the Design phases described in Section 4.2 relevant provisions of Schedule 2 [Design 1 – Statement of Requirements and Construction Protocols], a report for the Submittal including the information described in Section 4.2(c)(10) of Schedule 2 as applicable to any matter that Submittal; (4) for each Submittalhas previously been subject to review. All Submittals will: (Aa) be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include a list of all attached Submittals and for each Submittal the document number(s) or drawing number(s); (Bb) include revision numbers (if applicable); (Cc) include document or drawing title(s); (Dd) include name of entity that prepared the Submittal; (Ee) include details of the Submittal history log showing date and delivery information and/or log number of all previous submissions of that Submittal; and (F) identification of any previous Submittal superseded by the current Submittal. (f) Project Co will compile , and maintain a register description of the date, contents and status portions of the submission Submittal that are the subject of all Submittals, including the date of receipt and content of all returned Submittals and comments thereonreview.

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) 2.1 Unless otherwise specified by this Agreement or by the Authority, Project Co will: (1) deliver 5 printed copies of each Submittal to the Authority, together with electronic copies in both Autodesk Design Review ‘DWF’ and Adobe Reader ‘PDF’ format; and (2) post Design-Builder will issue an electronic copy of each Submittal (in a .pdf format acceptable or other format agreed by the parties acting reasonably. Unless otherwise required by this Agreement or by applicable Law to be signed or sealed at the time the Submittal is first provided to the Authority, upon assignment of the comment "REVIEWED" by the Authority of each Submittal the Design-Builder will issue a paper copy (or an electronically sealed copy if agreed by the Authority) on an internetof the Submittal that has been sealed by the Design-based system that is established Builder's Consultant as required by Project Co for the Project and accessible to Authority staffSection 2.4 below. (b) 2.2 The Design-Builder will compile and maintain a Submittal log that includes the date, contents and status of the submission of all Submittals, including the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereon. 2.3 All Submittals will be in English. (c) 2.4 All Submittals Submittals, and all amended versions of Submittals, required by this Agreement, Agreement or by applicable Law or Good Industry Practice to be signed or sealed by persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed. (d) All Submittals will refer to the relevant provisions of the Design , and Construction Specifications, the Services Protocols and Specifications (if applicable) and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming confirmation by such person or persons that the Submittals comply with, or identifying any elements of Work proposed by the Facility that for any reason vary from, Submittal meets the requirements of the Project Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]including the Statement of Requirements. (e) 2.5 All Submittals will include all documents to be clearly identified as a Submittal reviewed and will be delivered with appropriate covering documentation, which will include: (1) a list of all attached Submittals; (2) a description of: (A) clearly identify the purpose of the Submittal(s) (including whether Submittal, the Submittal is being submitted for review by the User Consultation Group for review under Section 5 of this Appendix or for other purposes); (B) the specific item or items in the Submittal that is subject to review by the Authority or the User Consultation Group; and (C) Project Co’s expectations for the Authority’s review of the Submittal and Project Co’s Design-Builder's proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal;. (3) if 2.6 All Submittals will refer to the Submittal is submitted as part of the Design phases described in Section 4.2 relevant provisions of Schedule 2 [Design 1 – Statement of Requirements and Construction Protocols], a report for the Submittal including the information described in Section 4.2(c)(10) of Schedule 2 as applicable to any matter that Submittal; (4) for each Submittalhas previously been subject to review. All Submittals will: (Aa) be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include a list of all attached Submittals and for each Submittal the document number(s) or drawing number(s); (Bb) include revision numbers (if applicable); (Cc) include document or drawing title(s); (Dd) include name of entity that prepared the Submittal; (Ee) include details of the Submittal history log showing date and delivery information and/or log number of all previous submissions of that Submittal; and (F) identification of any previous Submittal superseded by the current Submittal, and a description of the portions of the Submittal that are the subject of review. (f) Project Co will compile and maintain a register state the purpose of the date, contents and status submittal or portions of the submission submittal and provide clarification regarding any portions of all Submittals, including the date of receipt and content of all returned Submittals and comments thereonsubmittal that are not intended to be reviewed.

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) Unless otherwise specified by the Authority, Project Co will: (1) deliver 5 printed copies of each Submittal to the Authority, together with an electronic copies copy in both Autodesk Design Review ‘DWF’ and Adobe Reader ‘PDF’ formata format acceptable to the Authority; and (2) post an electronic copy of each Submittal (in a format acceptable to the Authority) on an internet-based system that is established by Project Co for the Project and accessible to Authority staff. (b) All Submittals will be in English. (c) All Submittals required by this Agreement, by applicable Law or Good Industry Practice to be signed or sealed by persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed. (d) All Submittals will refer to the relevant provisions of the Design and Construction Specifications, the Services Protocols and Specifications (if applicable) and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming that the Submittals comply with, or identifying any elements of the Facility that for any reason vary from, the requirements of the Project Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]. (e) All Submittals will be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include: (1) a list of all attached Submittals; (2) a description of: (A) the purpose of the Submittal(s) (including whether the Submittal is being submitted for review by the User Consultation Group under Appendix 2B [User Consultation Process], for review under Section 5 4 of this Appendix or for other purposes); (B) the specific item or items in component of the Submittal design that is subject to review by the Authority or the User Consultation Group; and (C) Project Co’s expectations for the Authority’s review of the Submittal and Project Co’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal; (3) if the Submittal is submitted as part of the Design design phases described in Section 4.2 5.3(c) of Schedule 2 [Design and Construction Protocols], a report for the Submittal including the information described in Section 4.2(c)(105.3(d)(10) of Schedule 2 [Design and Construction Protocols] as applicable to that Submittal; (4) for each Submittal: (A) the document number(s) or drawing number(s); (B) revision numbers (if applicable); (C) document or drawing title(s); (D) name of entity that prepared the Submittal; (E) the Submittal history showing date and delivery information and/or log number of all previous submissions of that Submittal; and (F) identification of any previous Submittal superseded by the current Submittal. (f) Project Co will compile and maintain a register of the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereon.

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) Unless otherwise specified by the Authority, Project Co will: (1) deliver 5 2 full set printed copies (plus single sheet at the request of the Authority) of each Submittal to the Authority, together with an electronic copies copy in both Autodesk Design Review ‘DWF’ and Adobe Reader ‘PDF’ formata format acceptable to the Authority; and (2) post an electronic copy of each Submittal (in a format acceptable to the Authority) on an internet-based system that is established by Project Co the Authority for the Project and accessible to Project Co and the Authority staff. (b) All Submittals will be in English. (c) All Submittals required by this Agreement, by applicable Law or Good Industry Practice to be signed or sealed by persons Persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed. (d) All Submittals will refer to the relevant provisions of the Design and Construction Specifications, the Services Protocols and Specifications (if applicable) and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming that the Submittals comply with, or identifying any elements of the Facility that for any reason vary from, the requirements of the Project Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]. (e) All Submittals will be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include: (1) a list of all attached Submittals; (2) a description of: (A) the purpose of the Submittal(s) (including whether the Submittal is being submitted for review by the User Consultation Group Group, for review under Section 5 of this Appendix or for other purposes); (B) the specific item or items in component of the Submittal Design that is subject to review by the Authority or the User Consultation Group; (C) the specific item or items in the Submittal that are the subject of the review; and (CD) Project Co’s expectations for the Authority’s review of the Submittal and Project Co’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal; (3) if the Submittal is submitted as part of the Design phases described in Section 4.2 5.3 of Schedule 2 [Design and Construction Protocols], a report for the Submittal including the information described in Section 4.2(c)(105.3(c)(10) of Schedule 2 [Design and Construction Protocols] as applicable to that Submittal; (4) for each Submittal: (A) the document number(s) or drawing number(s); (B) revision numbers (if applicable); (C) document or drawing title(s); (D) name of entity that prepared the Submittal; (E) the Submittal history showing date and delivery information and/or log number of all previous submissions of that Submittal; and (F) identification of any previous Submittal superseded by the current Submittal. (f) Project Co will compile and maintain a register of the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereon.

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) ‌ 2.1 Unless otherwise specified by this Agreement or by the AuthorityOwner, Project Co will: (1) deliver the Design-Builder will issue 5 printed copies of each Submittal all Submittals to the AuthorityOwner, together with electronic copies in both Autodesk Design Review ‘DWF’ and Adobe Reader ‘PDF’ format; and (2) post an electronic copy of each Submittal (in a format acceptable to agreed by the Authority) on an internet-based system that is established by Project Co for the Project and accessible to Authority staffparties acting reasonably. (b) All Submittals will be in English. (c) All Submittals required by this Agreement, by applicable Law or Good Industry Practice to be signed or sealed by persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed. (d) All Submittals will refer to the relevant provisions of the Design and Construction Specifications, the Services Protocols and Specifications (if applicable) and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming that the Submittals comply with, or identifying any elements of the Facility that for any reason vary from, the requirements of the Project Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]. (e) All Submittals will be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include: (1) a list of all attached Submittals; (2) a description of: (A) the purpose of the Submittal(s) (including whether the Submittal is being submitted for review by the User Consultation Group for review under Section 5 of this Appendix or for other purposes); (B) the specific item or items in the Submittal that is subject to review by the Authority or the User Consultation Group; and (C) Project Co’s expectations for the Authority’s review of the Submittal and Project Co’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal; (3) if the Submittal is submitted as part of the Design phases described in Section 4.2 of Schedule 2 [Design and Construction Protocols], a report for the Submittal including the information described in Section 4.2(c)(10) of Schedule 2 as applicable to that Submittal; (4) for each Submittal: (A) the document number(s) or drawing number(s); (B) revision numbers (if applicable); (C) document or drawing title(s); (D) name of entity that prepared the Submittal; (E) the Submittal history showing date and delivery information and/or log number of all previous submissions of that Submittal; and (F) identification of any previous Submittal superseded by the current Submittal. (f) Project Co 2.2 The Design-Builder will compile and maintain a register of the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereonthereon.‌ 2.3 All Submittals will be in English. 2.4 All Submittals required by this Agreement or by applicable Law to be signed or sealed by persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed, and will include confirmation by such person or persons that the Work proposed by the Submittal meets the requirements of the Agreement, including the Statement of Requirements.‌ 2.5 All Submittals will include all documents to be reviewed and will clearly identify the purpose of the Submittal, the Design-Builder’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal. 2.6 All Submittals will refer to the relevant provisions of Schedule 1 – Statement of Requirements and to any matter that has previously been subject to review. 2.7 All Submittals will be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include a list of all attached Submittals and for each Submittal: the document number(s) or drawing number(s); revision numbers (if applicable); document or drawing title(s); name of entity that prepared the Submittal; the Submittal history showing date and delivery information and/or log number of all previous submissions of that Submittal; identification of any previous Submittal superseded by the current Submittal; and a description of the portions of the Submittal that are the subject of review.‌

GENERAL REQUIREMENTS FOR SUBMITTALS. (a) 2.1 Unless otherwise specified by this Agreement or by the AuthorityOwner, Project Co will: (1) deliver the Design-Builder will issue 5 printed copies of each Submittal all Submittals to the AuthorityOwner, together with electronic copies in both Autodesk Design Review ‘DWF’ and Adobe Reader ‘PDF’ format; and (2) post an electronic copy of each Submittal (in a format acceptable to agreed by the Authority) on an internet-based system that is established by Project Co for the Project and accessible to Authority staffparties acting reasonably. (b) All Submittals will be in English. (c) All Submittals required by this Agreement, by applicable Law or Good Industry Practice to be signed or sealed by persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed. (d) All Submittals will refer to the relevant provisions of the Design and Construction Specifications, the Services Protocols and Specifications (if applicable) and to any matter that has previously been subject to review. All Submittals (or covering documentation delivered with the Submittals) will include a statement confirming that the Submittals comply with, or identifying any elements of the Facility that for any reason vary from, the requirements of the Project Agreement, with particular reference to Schedule 2 [Design and Construction Protocols] and Schedule 3 [Design and Construction Specifications]. (e) All Submittals will be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include: (1) a list of all attached Submittals; (2) a description of: (A) the purpose of the Submittal(s) (including whether the Submittal is being submitted for review by the User Consultation Group for review under Section 5 of this Appendix or for other purposes); (B) the specific item or items in the Submittal that is subject to review by the Authority or the User Consultation Group; and (C) Project Co’s expectations for the Authority’s review of the Submittal and Project Co’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal; (3) if the Submittal is submitted as part of the Design phases described in Section 4.2 of Schedule 2 [Design and Construction Protocols], a report for the Submittal including the information described in Section 4.2(c)(10) of Schedule 2 as applicable to that Submittal; (4) for each Submittal: (A) the document number(s) or drawing number(s); (B) revision numbers (if applicable); (C) document or drawing title(s); (D) name of entity that prepared the Submittal; (E) the Submittal history showing date and delivery information and/or log number of all previous submissions of that Submittal; and (F) identification of any previous Submittal superseded by the current Submittal. (f) Project Co 2.2 The Design-Builder will compile and maintain a register of the date, contents and status of the submission of all Submittals, including the date of receipt and content of all returned Submittals and comments thereon. 2.3 All Submittals will be in English. 2.4 All Submittals required by this Agreement or by applicable Law to be signed or sealed by persons with professional designations (including where applicable by registered professional architects or engineers) will be so signed and, where applicable, sealed, and will include confirmation by such person or persons that the Work proposed by the Submittal meets the requirements of the Agreement, including the Statement of Requirements. 2.5 All Submittals will include all documents to be reviewed and will clearly identify the purpose of the Submittal, the Design-Builder’s proposed course of action relating to the Submittal and the Design and the Construction that are the subject of the Submittal. 2.6 All Submittals will refer to the relevant provisions of Schedule 1 – Statement of Requirements and to any matter that has previously been subject to review. 2.7 All Submittals will be clearly identified as a Submittal and will be delivered with appropriate covering documentation, which will include a list of all attached Submittals and for each Submittal: the document number(s) or drawing number(s); revision numbers (if applicable); document or drawing title(s); name of entity that prepared the Submittal; the Submittal history showing date and delivery information and/or log number of all previous submissions of that Submittal; identification of any previous Submittal superseded by the current Submittal; and a description of the portions of the Submittal that are the subject of review.