INITIAL ASSAY Sample Clauses

INITIAL ASSAY fluorescence technique ("the XRF technique"), prior to the refining of the product.
Sample 1
AutoNDA by SimpleDocs

Related to INITIAL ASSAY

  • Additional Land All xxxxxxxxxx xxxxx, xxxxxxx and development rights hereafter acquired by Borrower for use in connection with the Land and the development of the Land and all additional lands and estates therein which may, from time to time, by supplemental mortgage or otherwise be expressly made subject to the lien of this Security Instrument;

  • Initial Improvements Subtenant may, at its option and subject to the provisions of the Prime Lease, including, without limitation, Article 8 thereof, complete certain initial improvements to prepare the Demised Premises for Subtenant’s occupancy thereof as described in the Work Letter Agreement attached hereto and made a part hereof as Exhibit B (the “Initial Improvements”), at Subtenant’s sole cost and expense without any contribution or improvement allowance from Sublandlord described in the Work Letter Agreement attached hereto and made a part hereof as Exhibit B); provided, however, Subtenant shall not make or permit anyone to make any Initial Improvements without the prior written consent of Sublandlord, which shall not be unreasonably withheld or delayed, and of Prime Landlord in accordance with the Prime Lease. In connection with the foregoing, Subtenant shall submit to Sublandlord, for prior written approval by Sublandlord, which shall not be unreasonably withheld or delayed, and Prime Landlord, complete plans and specifications for any and all Initial Improvements; including, without limitation, schematic designs and work drawings. Any and all costs and expenses associated with the acquisition of cabling, equipment, furniture, security systems, or other personal property for Subtenant or the Demised Premises or the installation or placement of any of the foregoing within the Demised Premises or with the project management for the performance of the Initial Improvements (collectively, “Subtenant’s Personal Property and Services”), shall be paid for by and be the sole responsibility of Subtenant. Sublandlord acknowledges and agrees that Subtenant shall not be required to remove any Initial Improvements upon the expiration or earlier termination of this Sublease unless the removal is required by Prime Landlord or Sublandlord is otherwise obligated to pay Prime Landlord the costs of any removal of any Initial Improvements pursuant to Section 8(e) of the Prime Lease.

  • Additional Improvements Common Area Operating Expenses shall not include Real Property Taxes specified in the tax assessor's records and work sheets as being caused by additional improvements placed upon the Industrial Center by other lessees or by Lessor for the exclusive enjoyment of such other lessees. Notwithstanding Paragraph 10.1 hereof, Lessee shall, however, pay to Lessor at the time Common Area Operating Expenses are payable under Paragraph 4.2, the entirety of any increase in Real Property Taxes if assessed solely by reason of Alterations, Trade Fixtures or Utility Installations placed upon the Premises by Lessee or at Lessee's request.

  • Valid Transfer This Agreement or, in the case of Additional Accounts, the related Assignment constitutes a valid sale, transfer and assignment to the Trust of all right, title and interest of the Seller in the Receivables and the Collateral Security and the proceeds thereof and all of the Seller's rights, remedies, powers and privileges with respect to the Receivables under the Receivables Purchase Agreement and, upon the filing of the financing statements described in Section 2.01 with the Secretary of State of the State of Delaware and, in the case of the Receivables hereafter created and the proceeds thereof, upon the creation thereof, the Trust shall have a first priority perfected ownership interest in such property, subject to the rights of the Purchased Receivables Owners in any Collateral Security in respect of the Partial Accounts (other than the Vehicles relating to Principal Receivables arising in the Partial Accounts), except for Liens permitted under the Receivables Purchase Agreement. Except as otherwise provided in this Agreement and except for Liens permitted under the Receivables Purchase Agreement or the other Transaction Documents, neither the Seller nor any Person claiming through or under the Seller has any claim to or interest in the Collateral of the Trust. The representations and warranties set forth in this Section 2.03 shall survive the transfer and assignment of the Receivables to the Trust and the issuance of the Notes. Upon discovery by the Seller, the Servicer, the Trust, the Owner Trustee, any Agent or the Trustee of a breach of any of the foregoing representations and warranties, the party discovering such breach shall give prompt written notice to the other parties specified above, and to any Enhancement Providers. In the event of any breach of any of the representations and warranties set forth in this Section 2.03 having a material adverse effect on the interests of the Noteholders, then either the Trustee or the Holders of Notes evidencing not less than a majority of the aggregate Outstanding Dollar Principal Amount of all Notes, by notice then given in writing to the Seller (and to the Trustee, the Trust, any Enhancement Providers and the Servicer if given by the Noteholders), may direct the Seller to purchase the Noteholders' Interest within 60 days of such notice (or within such longer period as may be specified in such notice), and the Seller shall be obligated to make such purchase on a Payment Date occurring within such 60-day period on the terms and conditions set forth below; provided, however, that no such purchase shall be required to be made if, by the end of such 60-day period (or such longer period as may be specified), the representations and warranties set forth in this Section 2.03 shall be satisfied in all material respects, and any material adverse effect on the Noteholders' Interest caused thereby shall have been cured. The Seller shall deposit in the Collection Account in immediately available funds on the Business Day preceding such Payment Date, in payment for such purchase of the Noteholders' Interest, the Reassignment Amount for such Payment Date. Notwithstanding anything to the contrary in this Agreement, such amounts deposited in the Collection Account shall be applied in accordance with Section 706 of the Indenture and shall be allocated pro rata among the then-outstanding Series based on their respective Series Nominal Liquidation Amounts. If the Trustee or the Noteholders give notice directing the Seller to purchase the Noteholders' Interest as provided above, the obligation of the Seller to purchase the Noteholders' Interest pursuant to this Section 2.03 shall constitute the sole remedy respecting an event of the type specified in the first sentence of this Section 2.03 available to the Noteholders (or the Trustee on behalf of the Noteholders).

  • Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.

  • License Transfer Customer may not sublicense, assign, transfer, rent or lease the software or software license except as permitted by HP. HP-branded software licenses are generally transferable subject to HP’s prior written authorization and payment to HP of any applicable fees. Upon such transfer, Customer’s rights shall terminate and Customer shall transfer all copies of the software to the transferee. Transferee must agree in writing to be bound by the applicable software license terms. Customer may transfer firmware only upon transfer of associated hardware.

  • Manufacturing Rights (a) If QED fails to supply Product ordered by ViewRay in accordance with the terms of this Agreement regarding the quantity or quality of Products supplied to ViewRay, then QED shall within fifteen (15) Business Days of said failure present ViewRay with a plan to remedy the problem and shall use Commercially Reasonable Efforts to execute such plan and remedy the problem or QED shall secure an alternative source of supply within a reasonable time at no additional cost to ViewRay. Any such alternative source of supply shall be on terms substantially identical with the terms of this Agreement. If QED is unable to provide a plan to remedy the problem or secure an alternative source of supply within [***] after its initial failure to supply, then QED shall consult with ViewRay and the parties shall work together to remedy the problem. If QED is unable to remedy the supply problem after [***] (or longer as agreed in writing by the parties), commencing with the date upon which such failure to supply began, then ViewRay may at its option, and upon notice to QED, manufacture the Products itself or through a third party in accordance with the provisions of Section 3.10(b). [***] Certain information in this document has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. (b) If ViewRay notifies QED pursuant to Section 3.10(a), above, that ViewRay will manufacture the Products itself or through a third party, QED shall (i) deliver to ViewRay within thirty (30) days media embodying or disclosing all Program technology and Program proprietary or intellectual property rights necessary to enable ViewRay or its designee to manufacture Products conforming with the Specifications; and (ii) provide ViewRay or its designee, upon request, with reasonable assistance in establishing a back-up manufacturing line. ViewRay shall require any third party ViewRay designates to manufacture Products pursuant to this Section 3.10, to agree in writing to observe the terms of this Agreement relating to confidentiality and the manufacture of Products. Notwithstanding any provision of this Section 3.10 to the contrary, in no case shall QED be required to pay ViewRay in respect of any Products purchased by ViewRay from a third party operating a back-up manufacturing line established pursuant to this Section 3.10 or manufactured by ViewRay or its Affiliates pursuant to this Section 3.10.

  • PREVAILING WAGE RATES - PUBLIC WORKS AND BUILDING SERVICES CONTRACTS If any portion of work being Bid is subject to the prevailing wage rate provisions of the Labor Law, the following shall apply:

  • Title Transfer For the above consideration, Seller (s) agrees to give a good and merchantable title by Xxxx, free and clear of all encumbrances except: NONE. Title to be conveyed subject to all prior restrictions, easements, conditions, encumbrances, condemnation, right of ways, joint permanent easements, covenants or restrictions of record, zoning ordinances or laws of any government authority, status of mineral rights, status of oil and gas rights, or any type leases or assignments, taxes of any type, properties in FEMA flood zone, and other matters recorded or unrecorded, known or unknown. Mobile Homes Are Sold WITHOUT TITLE. Buyer shall pay, but not limited to: HOA requirements, Buyers Occurred expense, ALL Transfer Fees and or Membership Fees, if applicable.

  • Additional Products Upon satisfying the minimum order requirements above, Enrolled Affiliate may order Additional Products.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!