Common use of Intent of Agreement Clause in Contracts

Intent of Agreement. 3.1 Execution of this Agreement is a representation that the Contractor has carefully examined the Contract Documents and the site, and represents that the Contractor shall become familiar with the nature and location of each Project, the Worksite, the specific conditions under which the Services are to be performed, and all matters which may in any way affect the Work or its performance. The Contractor further represents that, as a result of such examinations and investigations, the Contractor thoroughly understands the Contract Documents and their intent and purpose, and is familiar with all applicable codes, ordinances, laws, regulations and rules as they apply to the Work, and that the Contractor will abide by same. Claims for additional time or additional compensation as a result of the Contractor’s failure to follow the foregoing procedure and to familiarize itself with all local conditions and the Contract Documents will not be permitted. 3.2 The intent of the Contract Documents is to include all items necessary for the proper execution and completion of the Project by the Contractor. Contract Documents are complimentary, and what is required by any one shall be as binding as if required by all; performance by the Contractor shall be required only to the extent consistent with the Contract Documents and reasonable inferable from them as being necessary to produce the intended results. 3.3 In the event of conflicting provisions in the specifications or the Drawings, the more specific provision will take precedence over the less specific; the more stringent will take precedence over the less stringent; and the more expensive item will take precedence over the less expensive. On all Drawings, figures take precedence over scaled dimensions. 3.4 Organization of the specifications into divisions, sections and articles, and the arrangement of Drawings shall not control the Contractor in dividing the Work among Subcontractors or in establishing the extent of Work to be performed by any trade. 3.5 Unless otherwise stated in the Contract Documents, words which have well-known technical or construction industry meanings are used in the Contract Documents in accordance with such recognized meanings. 3.6 In the event of any conflict between the Contract Documents or any ambiguity or missing specification or instruction, the following priority is hereby established: 3.6.1 Specific written direction from the City Manager or City Manager’s designee. 3.6.2 This Agreement.

Appears in 17 contracts

Samples: Residential Rehabilitation Program Agreement, Residential Rehabilitation Program Agreement, Residential Rehabilitation Program Agreement

AutoNDA by SimpleDocs

Intent of Agreement. 3.1 Execution of this Agreement is a representation that the Contractor has carefully examined the Contract Documents and the site, and represents that the Contractor shall become is thoroughly familiar with the nature and location of each the Project, the Worksite, the specific conditions under which the Services are to be performed, and all matters which may in any way affect the Work or its performance. The Contractor further represents that, as a result of such examinations and investigations, the Contractor thoroughly understands the Contract Documents and their intent and purpose, and is familiar with all applicable codes, ordinances, laws, regulations and rules as they apply to the Work, and that the Contractor will abide by same. Claims for additional time or additional compensation as a result of the Contractor’s failure to follow the foregoing procedure and to familiarize itself with all local conditions and the Contract Documents will not be permitted. 3.2 The intent of the Contract Documents is to include all items necessary for the proper execution and completion of the Project by the Contractor. Contract Documents are complimentary, and what is required by any one shall be as binding as if required by all; performance by the Contractor shall be required only to the extent consistent with the Contract Documents and reasonable inferable from them as being necessary to produce the intended results. 3.3 In the event of conflicting provisions in the specifications or the Drawings, the more specific provision will take precedence over the less specific; the more stringent will take precedence over the less stringent; and the more expensive item will take precedence over the less expensive. On all Drawings, figures take precedence over scaled dimensions. 3.4 Organization of the specifications into divisions, sections and articles, and the arrangement of Drawings shall not control the Contractor in dividing the Work among Subcontractors or in establishing the extent of Work to be performed by any trade. 3.5 Unless otherwise stated in the Contract Documents, words which have well-known technical or construction industry meanings are used in the Contract Documents in accordance with such recognized meanings. 3.6 In the event of any conflict between the Contract Documents or any ambiguity or missing specification or instruction, the following priority is hereby established: 3.6.1 Specific written direction from the City Manager or City Manager’s designee. 3.6.2 This Agreement.

Appears in 7 contracts

Samples: Residential Rehabilitation Program Agreement, Home Beautification Project Agreement, Home Beautification Project Agreement

Intent of Agreement. 3.1 Execution of this Agreement is a representation that the Contractor has carefully examined the Contract Documents and the site, and represents that the Contractor shall become is thoroughly familiar with the nature and location of each the Project, the Worksite, the specific conditions under which the Services are to be performed, and all matters which may in any way affect the Work or its performance. The Contractor further represents that, as a result of such examinations and investigations, the Contractor thoroughly understands the Contract Documents and their intent and purpose, and is familiar with all applicable codes, ordinances, laws, regulations and rules as they apply to the Work, and that the Contractor will abide by same. Claims for additional time or additional compensation as a result of the Contractor’s failure to follow the foregoing procedure and to familiarize itself with all local conditions and the Contract Documents will not be permitted. 3.2 The intent of the Contract Documents is to include all items necessary for the proper execution and completion of the Project by the Contractor. Contract Documents are complimentary, and what is required by any one shall be as binding as if required by all; performance by the Contractor shall be required only to the extent consistent with the Contract Documents and reasonable inferable from them as being necessary to produce the intended results. 3.3 In the event of conflicting provisions in the specifications or the Drawings, the more specific provision will take precedence over the less specific; the more stringent will take precedence over the less stringent; and the more expensive item will take precedence over the less expensive. On all Drawings, figures take precedence over scaled dimensions. Scaling of dimensions, if done, is done at the Contractor’s own risk. 3.4 Organization of the specifications into divisions, sections and articles, and the arrangement of Drawings shall not control the Contractor in dividing the Work among Subcontractors or in establishing the extent of Work to be performed by any trade. 3.5 Unless otherwise stated in the Contract Documents, words which have well-known technical or construction industry meanings are used in the Contract Documents in accordance with such recognized meanings. 3.6 In the event of any conflict between the Contract Documents or any ambiguity or missing specification or instruction, the following priority is hereby established: 3.6.1 Specific written direction from the City Manager or City Manager’s designee. 3.6.2 This Agreement.

Appears in 7 contracts

Samples: Roadway Improvements Agreement, Asphalt Replacement Services Agreement, Asphalt Replacement Services Agreement

Intent of Agreement. 3.1 Execution of this Agreement is a representation that the Contractor has carefully examined the Contract Documents and the site, and represents that the Contractor shall become is thoroughly familiar with the nature and location of each the Project, the Worksiteworksite, the specific conditions under which the Services are to be performed, and all matters which may in any way affect the Work or its performance. The Contractor further represents that, as a result of such examinations and investigations, the Contractor thoroughly understands the Contract Documents and their intent and purpose, and is familiar with all applicable codes, ordinances, laws, regulations and rules as they apply to the Work, and that the Contractor will abide by same. Claims for additional time or additional compensation as a result of the Contractor’s failure to follow the foregoing procedure and to familiarize itself with all local conditions and the Contract Documents will not be permitted. 3.2 The intent of the Contract Documents is to include all items necessary for the proper execution and completion of the Project by the Contractor. Contract Documents are complimentary, and what is required by any one shall be as binding as if required by all; performance by the Contractor shall be required only to the extent consistent with the Contract Documents and reasonable inferable from them as being necessary to produce the intended results. 3.3 In the event of conflicting provisions in the specifications or the Drawings, the more specific provision will take precedence over the less specific; the more stringent will take precedence over the less stringent; and the more expensive item will take precedence over the less expensive. On all Drawings, figures take precedence over scaled dimensions. Scaling of dimensions, if done, is done at the Contractor’s own risk. 3.4 Organization of the specifications into divisions, sections and articles, and the arrangement of Drawings shall not control the Contractor in dividing the Work among Subcontractors or in establishing the extent of Work to be performed by any trade. 3.5 Unless otherwise stated in the Contract Documents, words which have well-known technical or construction industry meanings are used in the Contract Documents in accordance with such recognized meanings. 3.6 In the event of any conflict between the Contract Documents or any ambiguity or missing specification or instruction, the following priority is hereby established: 3.6.1 This Agreement. 3.6.2 Specific written direction from the City Manager or City Manager’s designee. 3.6.2 This Agreement3.6.3 The Proposal.

Appears in 2 contracts

Samples: Breezeswept Park and Tot Lot Renovation Agreement, Water Main Improvements Agreement

Intent of Agreement. 3.1 Execution of this Agreement is a representation that the Contractor has carefully examined the Contract Documents and the site, and represents that the Contractor shall become is thoroughly familiar with the nature and location of each the Project, the Worksiteworksite, the specific conditions under which the Services are to be performed, and all matters which may in any way affect the Work or its performance. The Contractor further represents that, as a result of such examinations and investigations, the Contractor thoroughly understands the Contract Documents and their intent and purpose, and is familiar with all applicable codes, ordinances, laws, regulations and rules as they apply to the Work, and that the Contractor will abide by same. Claims for additional time or additional compensation as a result of the Contractor’s failure to follow the foregoing procedure and to familiarize itself with all local conditions and the Contract Documents will not be permitted. 3.2 The intent of the Contract Documents is to include all items necessary for the proper execution and completion of the Project by the Contractor. Contract Documents are complimentary, and what is required by any one shall be as binding as if required by all; performance by the Contractor shall be required only to the extent consistent with the Contract Documents and reasonable inferable from them as being necessary to produce the intended results.; 3.3 In the event of conflicting provisions in the specifications or the Drawings, the more specific provision will take precedence over the less specific; the more stringent will take precedence over the less stringent; and the more expensive item will take precedence over the less expensive. On all Drawings, figures take precedence over scaled dimensions. Scaling of dimensions, if done, is done at the Contractor’s own risk. 3.4 Organization of the specifications into divisions, sections and articles, and the arrangement of Drawings shall not control the Contractor in dividing the Work among Subcontractors or in establishing the extent of Work to be performed by any trade. 3.5 Unless otherwise stated in the Contract Documents, words which have well-known technical or construction industry meanings are used in the Contract Documents in accordance with such recognized meanings. 3.6 In the event of any conflict between the Contract Documents or any ambiguity or missing specification or instruction, the following priority is hereby established: 3.6.1 This Agreement. 3.6.2 Specific written direction from the City Manager or City Manager’s designee. 3.6.2 This Agreement3.6.3 The Proposal.

Appears in 2 contracts

Samples: Wastewater Pump Station Rehabilitation Agreement, Wastewater Pump Station Rehabilitation Agreement

AutoNDA by SimpleDocs

Intent of Agreement. 3.1 Execution of this Agreement is a representation that the Contractor has carefully examined the Contract Documents and the site, and represents that the Contractor shall become is thoroughly familiar with the nature and location of each the Project, the Worksite, the specific conditions under which the Services are to be performed, and all matters which may in any way affect the Work or its performance. The Contractor further represents that, as a result of such examinations and investigations, the Contractor thoroughly understands the Contract Documents and their intent and purpose, and is familiar with all applicable codes, ordinances, laws, regulations and rules as they apply to the Work, and that the Contractor will abide by same. Claims for additional time or additional compensation as a result of the Contractor’s failure to follow the foregoing procedure and to familiarize itself with all local conditions and the Contract Documents will not be permitted.or 3.2 The intent of the Contract Documents is to include all items necessary for the proper execution and completion of the Project by the Contractor. Contract Documents are complimentary, and what is required by any one shall be as binding as if required by all; performance by the Contractor shall be required only to the extent consistent with the Contract Documents and reasonable inferable from them as being necessary to produce the intended results. 3.3 In the event of conflicting provisions in the specifications or the Drawings, the more specific provision will take precedence over the less specific; the more stringent will take precedence over the less stringent; and the more expensive item will take precedence over the less expensive. On all Drawings, figures take precedence over scaled dimensions. Scaling of dimensions, if done, is done at the Contractor’s own risk. 3.4 Organization of the specifications into divisions, sections and articles, and the arrangement of Drawings shall not control the Contractor in dividing the Work among Subcontractors or in establishing the extent of Work to be performed by any trade. 3.5 Unless otherwise stated in the Contract Documents, words which have well-known technical or construction industry meanings are used in the Contract Documents in accordance with such recognized meanings. 3.6 In the event of any conflict between the Contract Documents or any ambiguity or missing specification or instruction, the following priority is hereby established: 3.6.1 Specific written direction from the City Manager or City Manager’s designee. 3.6.2 This Agreement.

Appears in 1 contract

Samples: Professional Services Agreement

Intent of Agreement. 3.1 12.1 Execution of this Agreement is a representation that the Contractor has carefully examined the Contract Documents and the site, and represents that the Contractor shall become is thoroughly familiar with the nature and location of each the Project, the Worksite, the specific conditions under which the Services are to be performed, and all matters which may in any way affect the Work or its performance. The Contractor further represents that, as a result of such examinations and investigations, the Contractor thoroughly understands the Contract Documents and their intent and purpose, and is familiar with all applicable codes, ordinances, laws, regulations and rules as they apply to the Work, and that the Contractor will abide by same. Claims for additional time or additional compensation as a result of the Contractor’s failure to follow the foregoing procedure and to familiarize itself with all local conditions and the Contract Documents will not be permitted. 3.2 12.2 The intent of the Contract Documents is to include all items necessary for the proper execution and completion of the Project by the Contractor. Contract Documents are complimentary, and what is required by any one shall be as binding as if required by all; performance by the Contractor shall be required only to the extent consistent with the Contract Documents and reasonable inferable from them as being necessary to produce the intended results. 3.3 12.3 In the event of conflicting provisions in the specifications or the Drawings, the more specific provision will take precedence over the less specific; the more stringent will take precedence over the less stringent; and the more expensive item will take precedence over the less expensive. On all Drawings, figures take precedence over scaled dimensions. Scaling of dimensions, if done, is done at the Contractor’s own risk. 3.4 12.4 Organization of the specifications into divisions, sections and articles, and the arrangement of Drawings shall not control the Contractor in dividing the Work among Subcontractors Subcontractor or in establishing the extent of Work to be performed by any trade. 3.5 12.5 Unless otherwise stated in the Contract Documents, words which have well-known technical or construction industry meanings are used in the Contract Documents in accordance with such recognized meanings. 3.6 In the event of any conflict between the Contract Documents or any ambiguity or missing specification or instruction, the following priority is hereby established: 3.6.1 Specific written direction from the City Manager or City Manager’s designee. 3.6.2 This Agreement.. DocuSign Envelope ID: 7E438A0C-1BA8-4AEC-AAE6-5E3C9E00ED77

Appears in 1 contract

Samples: Construction Management Services Agreement

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!