Research License Each Collaborator shall allow the other Collaborator to practice any of its Non- Subject Inventions for the purpose of performing the Cooperative Work. No license, express or implied, for commercial application(s) is granted to either Collaborator in Non-Subject Inventions by performing the Cooperative Work. For commercial application(s) of Non-Subject Inventions, a license must be obtained from the owner.
Sublicense SONY shall be permitted to sublicense the rights ---------- granted in Section 2.1 only to: (a) wholly-owned subsidiaries of SONY; provided that SONY shall promptly notify LEXAR in writing of sublicenses granted to subsidiaries and SONY shall acknowledge responsibility for such subsidiary's compliance with the terms of this Lexar Technology License Agreement; and (b) any parties for the manufacture, use, offer for sale, import and sale of Host Devices and any components of Host Devices, provided that such third parties shall only be sublicensed under LEXAR Intellectual Property Rights for that portion of a Host Device or of any component of a Host Device that communicates directly with a Licensed Memory Stick. SONY's sublicense rights under this Section 2.2(b) shall be contingent upon SONY entering into a written agreement with each sublicensee in the form of Exhibit C. SONY will provide LEXAR with a copy of each such --------- sublicense agreement immediately after execution thereof. Nothing in this Agreement shall be construed as permitting SONY to reveal LEXAR Confidential Information, as such term is defined in Section 6, to sublicensees under this Section 2.2(b). In the event that SONY determines that the Memory Stick Specification contains LEXAR Confidential Information, LEXAR and SONY agree to negotiate in good faith additional specific provisions to the form sublicensee agreement to sufficiently protect LEXAR's Confidential Information. LEXAR and SONY acknowledge that in the course of these negotiations, the parties' mutual interest in making the Host Device manufacturing license available as broadly as possible should be weighed against the importance of protecting LEXAR's Confidential Information. Sublicensees under this Section 2.2 shall not have the right to sublicense the rights granted under this agreement. * Material has been omitted and filed separately with the Commission.
Sublicense Fees Licensee will pay Sublicense Fees indicated in Section 3.1(e) of the Patent & Technology License Agreement on or before the Quarterly Payment Deadline for the Contract Quarter.
Royalty Beglend shall pay royalties to InNexus equal to 3% of Net Sales Revenue, calculated and payable as follows: (a) any Royalty payable hereunder shall be calculated on a Product by Product basis for each jurisdiction (each a "Market Area")in which any such Product is sold; (b) the period for which Beglend is required to pay a Royalty hereunder shall commence upon the first Launch of Product in a particular Market Area, and shall continue for the patent life of any Patents comprising the Licensed Technology or any Joint Patents which may hereafter be filed with respect to such Product or upon which such Product is based in that Market Area (the "Royalty Payment Period"); (c) the first Royalty payment shall be calculated for the broken period commencing from the date of the first Launch of Product to and including the last day of Beglend's fiscal year in which the Launch of Product took place; and any succeeding Royalty payments shall be calculated from the first day until the last day of the corresponding fiscal year; and all Royalty payments shall be payable by cheque, cash, or bank draft, to InNexus' order, and shall be paid within 180 days of the completion of Beglend's fiscal year corresponding to that payment; provided that, notwithstanding the foregoing, Beglend shall pay quarterly installments of the estimated amount of Royalty payments due for each fiscal quarter completed after the date of Launch of Product, which shall be payable within 90 days after the end of each such quarter, and shall, when calculating the amount of Royalty due for that fiscal year in accordance with sub-section 6.5(c), adjust the installment payable for the final quarter in each fiscal year to reflect Beglend's estimate of the actual amount payable, after accounting for each of the prior payments made in that fiscal year; and Beglend shall pay all royalties in the currencies in which the revenues giving rise to such payment obligation are received by Beglend unless otherwise agreed in writing between the parties; (d) On or before 180 days following the end of each fiscal year of Beglend after the first Launch of Product, Beglend shall deliver to InNexus a statement indicating, in reasonable detail, as of the last day of the immediately preceding fiscal year, the calculation of Net Sales Revenue for each Product sold in each Market Area and the aggregate of the Royalty payable with respect to each such Product and each such Market Area for such year; (e) Beglcnd will maintain up to date and complete records for the production and sale of Products in each Market Area including accounts, records, statements, the amount of free Products and sample Products distributed, Product returns relating to sales and marketing of the Product, and InNexus or its agent shall have the right at all reasonable times, including for a period of 12 months following the expiration or termination of this Agreement, to inspect such accounts, records and statements and make copies thereof at their own expense for the purpose of verifying the amount of Royalty payments to be made by Beglend to InNexus pursuant hereto; and InNexus shall have the right at its own expense to have such accounts audited by independent auditors once each year; (f) Beglend shall have an audited statement prepared by its auditors (which shall be qualified certified public accountants or chartered accountants) for each year with respect to the Royalty payable to InNexus hereunder, by 180 days following the end of each fiscal year, and Beglend shall forthwith deliver a copy of such statement to InNexus; (g) All Royalty payments shall be considered full and final satisfaction of all obligations of Beglend making the same in respect thereof if such payments or the calculations in respect thereof are not disputed by InNexus within 180 days after receipt by InNexus of the audited statement referred to in subsection 6.5(f) hereof; and any disputes under this subsection shall be decided by arbitration as herein provided; (h) for the purpose of calculating Royalties, revenue shall be deemed to have been received when it has actually been received in the form of cash or credit or by way of any measurable benefit, advantage or concession; and in the event of any partial payment, the Royalty otherwise payable shall be pro-rated accordingly; in no event will Beglend be obligated to pay Royalties more than once in respect of any revenue received by it or its associates, affiliates, licensees or sub-licensees in connection with any single transaction (i.e. no "double" Royalties); and (i) for any product containing both a pharmaceutically active agent which causes it to be considered a Product and one or more other pharmaceutically active agents which are not Products (each a "Combination Product"), the parties shall in good faith negotiate and agree to an appropriate adjustment to the Net Sales Revenue to reflect the relative contribution of each Product and each other pharmaceutically active agent which is not a Product to the Combination Product; and if, after good faith negotiations (not to exceed ninety (90) days in duration unless extended by mutual agreement), the parties can not agree to an appropriate adjustment, Net Sale Revenue shall be equal to Net Sales of the Combination Product multiplied by a fraction, the numerator of which is the reasonable fair market value of the Compounds contained in the Combination Product and the denominator of which is the reasonable fair market value of all pharmaceutically active agents contained in the Combination Product, as determined by arbitration.
Developer License We grant you a non-assignable, non-sublicensable, non-exclusive, worldwide right and license for the number of Developer(s) indicated in the Order Form to install the Software on any number of Machines in order to internally use the Software to create, develop and test Applications. For clarity, a single Software license may be re-allocated to another Developer in the event that the original Developer is no longer employed by you or has been assigned to a new role where access to the Software will no longer be required on a permanent basis.
Technology License 4.1 Unless any event described in Article 2.2 or 2.3 of this Agreement occurs, all of the technology required to be licensed for any of Party B’s business shall be provided by Party A on an exclusive basis. Party A will try its best to license Party B to use the technology owned by Party A, or re-license Party B to use the technology as approved by the owner. 4.2 The Parties shall negotiate with each other to enter into specific technology license contracts to expressly specify the detail matters such as the technology to be licensed, the method to license the technology, license fees and payment.
SOFTWARE LICENSE GRANT Where Product is acquired on a licensed basis the following shall constitute the license grant:
PATENTS AND ROYALTIES Unless otherwise provided, the Contractor shall be solely responsible for obtaining the right to use any patented or copyrighted materials in the performance of the contract resulting from this Invitation for Bids. The Contractor, without exception, shall indemnify and save harmless the County and its employees from liability of any nature or kind, including cost and expenses for or on account of any copyrighted, patented, or unpatented invention, process, or article manufactured or supplied by the Contractor. In the event of any claim against the County of copyright or patent infringement, the County shall promptly provide written notification to the Contractor. If such a claim is made, the Contractor shall use its best efforts to promptly purchase for the County any infringing products or services or procure a license, at no cost to the County, which will allow continued use of the service or product. If none of the alternatives are reasonably available, the County agrees to return the article on request to the Contractor and receive reimbursement, if any, as may be determined by a court of competent jurisdiction.
Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY. (b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item. (c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.
Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.