Manufacturing Technology Transfer With respect to each Technology Transfer Product, upon AbbVie’s written request after the Inclusion Date for the Included Target to which such Technology Transfer Product is Directed, Morphic shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party manufacturer) of all Morphic Know-How and Joint Know-How relating to the then-current process for the Manufacture of such Technology Transfer Product (the “Manufacturing Process”) and to implement the Manufacturing Process at facilities designated by AbbVie (such transfer and implementation, as more fully described in this Section 5.3, the “Manufacturing Technology Transfer”). To assist with the Manufacturing Technology Transfer, Morphic will make its personnel reasonably available to AbbVie during normal business hours for up to [***] FTE hours with respect to each Included Target (in each case, free of charge to AbbVie) to transfer and implement the Manufacturing Process under this Section 5.3. Thereafter, if requested by AbbVie, Morphic shall continue to perform such obligations; provided, that AbbVie will reimburse Morphic for its full-time equivalent (FTE) costs (for clarity, in excess of [***] FTE hours) and any reasonable and verifiable out-of-pocket costs incurred in providing such assistance. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE COMPANY IF PUBLICLY DISCLOSED.
Technology Transfer Subject to the terms of the Development Supply Agreement, as soon as reasonably practicable, but in no event later than the fifth (5th) anniversary of the Effective Date, Alnylam shall initiate a technology transfer to MedCo, or to its Third Party manufacturer(s) of Licensed Product, selected by MedCo and reasonably acceptable to Alnylam, of Alnylam Know-How that is reasonably necessary or useful for the Manufacture of the Licensed Product, and shall make available its personnel on a reasonable basis to consult with MedCo or such Third Party manufacturer(s) with respect thereto, all at MedCo’s expense, including the Costs reasonably incurred by Alnylam in connection with such technology transfer activities. MedCo shall reimburse Alnylam such Costs incurred with respect to such Manufacturing technology transfer within [***] days after receipt of an invoice therefor. Alnylam and its Affiliates shall keep complete and accurate records in sufficient detail to enable the payments payable hereunder to be determined. Alnylam shall not be required to perform technology transfer to more than one Third Party manufacturer for each stage of the Licensed Product supply chain (i.e., Bulk Drug Substance, Bulk Drug Product and Finished Product). Promptly after MedCo’s written request, Alnylam shall use Commercially Reasonable Efforts to assign to MedCo any manufacturing agreement between Alnylam and a Third Party that is solely related to the manufacture of Licensed Products. Such assignment shall be subject to the terms and conditions of such agreement, including any required consents of such Third Party and MedCo’s written agreement to assume all the obligations of Alnylam under such agreement to be undertaken after such assignment, but Alnylam shall remain solely responsible for its obligations under such agreement arising prior to such assignment. Except as provided in the immediately preceding sentence, MedCo shall be solely responsible for contracting with such Third Party manufacturer (and any other Third Party manufacture to whom Alnylam has initiated technology transfer as set forth in this Section 5.3) for the supply of such Licensed Product and Alnylam shall have no obligations under such agreement between MedCo and such Third Party manufacturer. Alnylam shall use Commercially Reasonable Efforts to obtain any such consent in a form reasonably acceptable to MedCo.
Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].
Sale Process If a Non-Economic Facility is marketed for sale in accordance with Section 5.02 and Manager receives an offer therefor which it wishes to accept on behalf of the relevant TRS and Owner, Manager shall give the relevant TRS prompt notice thereof, which notice shall include a copy of the offer and any other information reasonably requested by such TRS. If the relevant TRS, on behalf of the relevant Owner, shall fail to accept or reject such offer within seven (7) Business Days after receipt of such notice and other information from Manager, such offer shall be deemed to be accepted. If the offer is rejected by the relevant TRS on behalf of the relevant Owner, and if Manager elects to continue marketing the Non-Economic Facility by providing written notice to the relevant TRS within seven (7) days of such rejection and Manager does not obtain another offer within ninety (90) days that is accepted by the relevant TRS, the Non-Economic Facility shall be deemed to have been sold to the relevant TRS on the date, at the price and on such other terms contained in the offer. If a Non-Economic Facility is sold to a third party or deemed to have been sold to the relevant Owner pursuant to such offer, effective as of the date of sale or deemed sale: (i) the Management Agreement shall terminate with respect to such Non-Economic Facility; (ii) Aggregate Invested Capital shall be reduced by an amount equal to the net proceeds of sale after reduction for the costs and expenses of the relevant TRS, the relevant Owner and/or Manager (or, in the case of a deemed sale, the net proceeds of sale determined by reference to such offer, after reduction for any amounts actually expended and any amounts which would reasonably have been expected to have been expended if the sale had been consummated by the relevant TRS, the relevant Owner and/or Manager). If the reduction in Aggregate Invested Capital is less than the Invested Capital of the Non-Economic Facility sold or deemed to have been sold, the difference shall be proportionately reallocated to the Invested Capital of the remaining Facilities.
Approval Process Tenant shall notify Landlord whether it approves of the submitted working drawings within three business days after Landlord’s submission thereof. If Tenant disapproves of such working drawings, then Tenant shall notify Landlord thereof specifying in reasonable detail the reasons for such disapproval, in which case Landlord shall, within five business days after such notice, revise such working drawings in accordance with Tenant’s objections and submit the revised working drawings to Tenant for its review and approval. Tenant shall notify Landlord in writing whether it approves of the resubmitted working drawings within one business day after its receipt thereof. This process shall be repeated until the working drawings have been finally approved by Landlord and Tenant. If Tenant fails to notify Landlord that it disapproves of the initial working drawings within three business days (or, in the case of resubmitted working drawings, within one business day) after the submission thereof, then Tenant shall be deemed to have approved the working drawings in question. Any delay caused by Tenant’s unreasonable withholding of its consent or delay in giving its written approval as to such working drawings shall constitute a Tenant Delay Day (defined below). If the working drawings are not fully approved (or deemed approved) by both Landlord and Tenant by the 15th business day after the delivery of the initial draft thereof to Tenant, then each day after such time period that such working drawings are not fully approved (or deemed approved) by both Landlord and Tenant shall constitute a Tenant Delay Day.
Manufacturing License Subject to the terms of this Agreement, including without limitation Section 2.2, Theravance grants to GSK an exclusive license under the Theravance Patents and Theravance Know-How to make and have made API Compound or formulated Alliance Product in the Territory.
Manufacturing Rights Manufacturing Rights will be governed by Attachment 6.
Commercialization Reports After the First Commercial Sale of a Licensed Product anywhere in the Territory, LICENSEE shall submit to Cornell semi-annual reports on or before each February 28 and August 31 of each year. Each report shall cover LICENSEE’s (and each Affiliate’s and Sublicensee’s) most recently completed calendar half-year and shall show:
Transfer Price 4.1. With regard to the Equity Transfer Option, the total Transfer Price to be paid by the WFOE or any other entity or individual designated by the WFOE to each Company Shareholder at each Exercise of Option by the WFOE shall be the capital contribution mirrored by the corresponding Transferred Equity in the Company Registered Capital. But if the lowest price permitted by the then-effective PRC Law is higher than the above capital contribution, the Transfer Price shall be the lowest price permitted by the PRC Law.
Clinical Supply Takeda will provide to Licensee[***] the amount of TAK-385 Licensed Compound or TAK-385 Licensed Products needed by Licensee to complete all Clinical Trials contemplated by the TAK-385 Development Plan (estimated by Licensee as of the Effective Date to be [***]), solely to the extent that Takeda can supply such TAK-385 [***] = Portions of this exhibit have been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment requested under 17 C.F.R. Sections 200.80(b)(4) and 230.406. Licensed Compound or TAK-385 Licensed Products (a) from its supply of TAK-385 Licensed Compound or TAK-385 Licensed Products in existence as of the Effective Date and which supply can be used for its intended purposes without further re-processing (the “Initial Clinical Supply”) and (b) after retaining the amount needed by Takeda for Clinical Trials in the Takeda Territory. Takeda will also provide to Licensee, at [***] any additional supplies of TAK-385 Licensed Compound or TAK-385 Licensed Products in excess of the Initial Clinical Supply needed by Licensee to complete all Clinical Trials contemplated by the TAK-385 Development Plan. Within [***] days after the Effective Date, the Parties will enter into a manufacturing and supply agreement (the “Takeda Clinical Manufacturing and Supply Agreement”), which will govern the terms and conditions of the Manufacturing and supply of the TAK-385 Licensed Compound and TAK-385 Licensed Products (including the Initial Clinical Supply) by Takeda to Licensee for Development purposes, including the exact quantities and the timelines for delivery. The Parties will negotiate the terms and conditions of such Takeda Clinical Manufacturing and Supply Agreement in good faith for a period of [***] days (as may be extended upon agreement of the Parties). As part of the negotiation related to the Takeda Clinical Manufacturing and Supply Agreement, the Parties shall discuss in good faith the ability of Takeda to supply to Licensee [***]. If the Parties have not entered into a definitive agreement within such negotiation period, then the final terms and conditions of such agreement will be resolved in accordance with Section 8.2 (Arbitration for Failure to Agree).
