Launch Quantities for Nucynta IR Authorized Generic Sample Clauses

Launch Quantities for Nucynta IR Authorized Generic. (i) The Parties’ intent is for Hikma to launch the Nucynta IR Authorized Generic in the Territory no later than the market entry of a Generic Equivalent of such Product by a Third Party in the Territory. Accordingly, and, provided that Collegium obtains DEA quota as necessary under Applicable Law to Manufacture and supply Hikma with Hikma’s forecasted supply quantities of the Nucynta IR Authorized Generic in accordance with the terms of the Manufacturing Agreement, Collegium shall have a certain initial volume of the Nucynta IR Authorized Generic Manufactured and Labeled for Hikma no later than (such date, the “Launch Delivery Date”): [***]. ​ (ii) Hikma may waive Collegium’s obligations under clause (i) above if [***]. Notwithstanding any of the provisions in this Section 1.3(d)(ii) to the contrary, if Collegium’s obligations have been timely waived, and [***], then Collegium will use Commercially Reasonable Efforts to provide Launch Quantities on, or as soon as possible after, the Launch Delivery Date. (iii) Xxxxx will pay Collegium the Transfer Price for all of the “initial volume” of Nucynta IR Authorized Generic manufactured and labeled for Hikma pursuant Section 1.3(d)(i) above regardless of whether or when market entry of a Generic Equivalent by a Third Party occurs, the details of the corresponding invoicing and payment to be set forth in the Manufacturing Agreement. Any and all such “initial volume” of Nucynta IR Authorized Generic manufactured and labeled for Hikma pursuant Section 1.3(d)(i) will not be deemed Obsolete and Slow Moving Items regardless of the remaining shelf life for such inventory of Product at the time of Xxxxx’s First Commercial Sale of such Product. [***].
AutoNDA by SimpleDocs

Related to Launch Quantities for Nucynta IR Authorized Generic

  • PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Originating Switched Access Detail Usage Data A category 1101XX record as defined in the EMI Telcordia Practice BR-010-200- 010.

  • Product Changes Vocera shall have the right, in its absolute discretion, without liability to End User, to update to provide new functionality or otherwise change the design of any Product or to discontinue the manufacture or sale of any Product. Vocera shall notify End User at least 90 days prior to the delivery of any Product which incorporates a change that adversely affects form, fit or function (“Material Change”). Vocera shall also notify End User at least 90 days prior to the discontinuance of manufacture of any Product. Notification will be made as soon as reasonably practical for changes associated with regulatory or health and safety issues.

  • PRICE LISTS AND PRODUCT INFORMATION Contractors should provide an electronic version of the proposed price list in an Excel format or pdf on a jump drive. Also provide a dealer list, if applicable in an Excel format with "read and write" capabilities on the same jump drive. No costs or expenses associated with providing this information in the required format shall be charged to the State of Arkansas. At the time of contract renewal contractor will furnish OSP with an updated dealer list and published price list.

  • Purchase Order Pricing/Product Deviation If a deviation of pricing/product on a Purchase Order or contract modification occurs between the Vendor and the TIPS Member, TIPS must be notified within five (5) business days of receipt of change order. TIPS reserves the right to terminate this agreement for cause or no cause for convenience with a thirty (30) days prior written notice. Termination for convenience is conditionally required under Federal Regulations 2 CFR part 200 if the customer is using federal funds for the procurement. All purchase orders presented to the Vendor, but not fulfilled by the Vendor, by a TIPS Member prior to the actual termination of this agreement shall be honored at the option of the TIPS Member. The awarded Vendor may terminate the agreement with ninety (90) days prior written notice to TIPS 0000 XX Xxx Xxxxx, Xxxxxxxxx, Xxxxx 00000. The vendor will be paid for goods and services delivered prior to the termination provided that the goods and services were delivered in accordance with the terms and conditions of the terminated agreement. This termination clause does not affect the sales agreements executed by the Vendor and the TIPS Member customer pursuant to this agreement. TIPS Members may negotiate a termination for convenience clause that meets the needs of the transaction based on applicable factors, such as funding sources or other needs. Usually, purchase orders or their equal are issued by participating TIPS Member to the awarded vendor and should indicate on the order that the purchase is per the applicable TIPS Agreement Number. Orders are typically emailed to TIPS at xxxxxx@xxxx-xxx.xxx. • Awarded Vendor delivers goods/services directly to the participating member. • Awarded Vendor invoices the participating TIPS Member directly. • Awarded Vendor receives payment directly from the participating member. • Fees are due to TIPS upon payment by the Member to the Vendor. Vendor agrees to pay the participation fee to TIPS for all Agreement sales upon receipt of payment including partial payment, from the Member Entity or as otherwise agreed by TIPS in writing and signed by an authorized signatory of TIPS.

  • ODUF Packing Specifications 6.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.

  • SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 4.12.1 Shop Drawings are drawings, diagrams, schedules and other, data specially prepared for the Work by the Contractor or any Subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work. 4.12.2 Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate a material, product or system for some portion of the Work. 4.12.3 Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged. 4.12.4 The Contractor shall review, approve and submit, with reasonable promptness and in such sequence as to cause no delay in the Work or in the work of the State or any separate contractor, all Shop Drawings, Product Data and Samples required by the Contract Documents. 4.12.5 By approving and submitting Shop Drawings, Product Data and Samples, the Contractor represents that he / she has determined and verified all materials, field measurements, and field construction criteria related thereto, or will do so, and that he / she has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents. 4.12.6 The Contractor shall not be relieved of responsibility for any deviation from the requirements of the Contract Documents by the Architect's approval of Shop Drawings, Product Data or Samples under Subparagraph 2.2.7 of these General Conditions unless the Contractor has specifically informed the Architect and the State in writing of such deviation at the time of sub- mission and the Architect and the State has given written approval to the specific deviation. The Contractor shall not be relieved from responsibility for errors or omissions in the Shop Drawings, Product Data or Samples by the Architect's approval thereof. 4.12.7 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data or Samples, to revisions other than those requested by the Architect on previous submittals. 4.12.8 No portion of the Work requiring submission of a Shop Drawing, Product Data or Sample shall be commenced until the submittal has been approved by the Architect as provided in Subparagraph 2.2.7 of these General Conditions. All such portions of the Work shall be in accordance with approved submittals.

  • Product Quality (a) Tesoro warrants that all Products delivered under this Agreement or any Purchaser Order shall meet the latest applicable pipeline specifications or otherwise mutually agreed upon specifications for that Product upon receipt at the applicable Terminal and contain no deleterious substances or concentrations of any contaminants that may make it or its components commercially unacceptable in general industry application. Tesoro shall not deliver to any of the Terminals any Products which: (i) would in any way be injurious to any of the Terminals; (ii) would render any of the Terminals unfit for the proper storage of similar Products; (iii) would contaminate or otherwise downgrade the quality of the Products stored in commingled storage; (iv) may not be lawfully stored at the Terminals; or (v) otherwise do not meet applicable Product specifications for such Product that are customary in the location of the Terminal. If, however, there are Products that do not have such applicable specifications, the specifications shall be mutually agreed upon by the Parties. Should Tesoro’s commingled Products not meet or exceed the minimum quality standards set forth in this Agreement or any applicable Terminal Service Order, Tesoro shall be liable for all loss, damage and cost incurred thereby, including damage to Products of third parties commingled with Tesoro’s unfit Products. (b) TLO shall have the right to store compatible Products received for Tesoro’s account with Products belonging to TLO or third parties in TLO’s commingled storage tanks. TLO shall handle Tesoro’s fungible Products in accordance with TLO’s prevailing practices and procedures for handling such Products. The quality of all Products tendered into commingled storage for Tesoro’s account shall be verified either by Tesoro’s refinery analysis or supplier’s certification, such that Products so tendered shall meet TLO’s Product specifications. All costs for such analysis shall be borne solely by Tesoro. TLO shall have the right to sample any Product tendered to the Terminals hereunder. The cost of such sampling shall be borne solely by TLO. All Products returned to Tesoro shall meet or exceed Product specifications in effect on the date the Products are delivered to Tesoro. Notwithstanding any other provision herein, any and all Products that leave the Terminals shall meet all relevant ASTM, EPA, federal and state specifications, and shall not leave the Terminals in the form of a sub-octane grade Product. (c) TLO shall exercise reasonable care to ensure that all Products delivered by third parties into commingled storage with Tesoro’s Products meet applicable Product specifications for such Product that are customary in the location of the Terminal. In the event that Tesoro’s Products are commingled with third-party Products that do not meet or exceed the minimum quality standards set forth in this Agreement or any Terminal Service Order, TLO shall be liable for all loss, damage and cost incurred thereby.

  • Product Supply 5.1 In the event that Eisai notifies Radius of its desire to purchase bulk substance of Compound from Radius, Radius shall supply Eisai with all amount of such bulk substance of Compound, which meets specifications for the Product determined by Radius in the course of its Development activities pursuant to this Agreement, required by Eisai for commercial sales of Product in Japan With respect to Eisai clinical development activities for Product in Japan, upon Eisai’s request, Radius shall supply Eisai the bulk substance of Compound for * Confidential Treatment Requested by the Registrant. Redacted Portion Filed Separately with the Commission. the conduct of the Eisai Development activities in the amounts and at the times determined by the SC, having reference to the quantity of the bulk substance of Compound required for clinical trials in Japan. Radius shall charge [*] for applicable bulk substance of Compound. Radius shall ship such bulk substance of Compound, FOB point of manufacturing. 5.2 In the event that Eisai notifies Radius of its desire to purchase Semi-Product from Radius which meets specifications determined by Radius in the course of its Development activities pursuant to this Agreement, Radius shall supply Eisai with all amount of Semi-Product required by Eisai for commercial sales of Product in Japan. With respect to Eisai clinical development activities for Product in Japan, upon Eisai’s request, Radius shall supply Eisai Semi-Product for the conduct of the Eisai Development activities in the amounts and at the times determined by the SC, having reference to the quantity of Semi-Product required for clinical trials in Japan. Radius shall charge [*] for Semi-Product. Radius shall ship such Semi-Product, FOB point of manufacturing. 5.3 The Parties agree that they shall, in good faith, discuss, negotiate and execute necessary agreements containing mutually acceptable terms, including but not limited to, a supply agreement for either bulk substance of Compound or Semi-Product as well as a quality control agreement of either bulk substance of Compound or Semi-Product, in the event that Eisai notifies Radius as set forth in Article 5.1 or 5.2. 5.4 As manufacturer of the Product, Radius shall be responsible for: (a) the control of the quality of the Product promoted and sold under the Radius trademarks; as provided in Article 2.3; and (b) ensuring that all bulk substance of Compound or Semi-Product supplied to Eisai pursuant to this Article 5 shall be manufactured in accordance with the applicable good manufacturing practices (GMP) and shall meet the then applicable specifications for the bulk substance of Compound or Semi-Product; and Radius warrants that all bulk substance of Compound or Semi-Product supplied to Eisai pursuant to this Article 5 shall be manufactured in accordance with the applicable GMP and * Confidential Treatment Requested by the Registrant. Redacted Portion Filed Separately with the Commission. shall meet the then applicable specifications for the bulk substance of Compound or Semi-Product and will be free from defects in material and workmanship. Radius shall resolve any product liability issues in the Territory relating to the Product and shall resolve any product liability issues in Japan relating to the Product or the bulk substance of Compound or Semi-Product, as the case may be, supplied to Eisai pursuant to this Article 5 in the event and to the extent related to a breach of the warranty set forth in Article 5.4(b) at its own expense and subject to Article 5.5. 5.5 Radius’ obligations with respect to product liability in the Territory and Japan shall include the following responsibilities, each to be taken at Radius’ expense: (a) Radius shall report, at its expense, to appropriate authorities, in accordance with local requirements, all adverse events related to use of the Product in the Territory or Japan. Eisai shall provide to Radius, upon Radius’ request, reasonable assistance in connection with the reporting of all of adverse events, responding to safety queries and assessing safety issues, in each case, to the extent related to the Product in Japan. Adverse events shall be recorded in a single, centralized database, which shall be held and owned by Radius. Radius will provide, upon request by Eisai, any safety information in Radius’ control and reasonably required by Eisai in connection with the development and commercialization of the Product in Japan and all reasonable assistance in responding to safety queries related to the Product and in assessing safety issues related to the Product in Japan. Details of safety reporting activities relating to the Product will be addressed in a pharmacovigilance contract, which the Parties shall enter into after the Effective Date. (b) In the event that (i) Radius determines that an event, incident, or circumstance may result in the need for a recall or other removal of the Product or any lot or lots thereof from the market; (ii) any regulatory authority in the Territory threatens to remove a Product from the market; or (iii) any regulatory authority in the Territory requires distribution of a “Dear Doctor” letter or its equivalent regarding the use of Product, Radius shall promptly advise Eisai in writing, and shall provide Eisai with copies of all relevant correspondence, notices and the like. Notwithstanding anything the contrary herein, Radius shall have final authority to make all decisions relating to any recall, market withdrawal or other corrective action with respect to the Product in the Territory. After establishing SC pursuant to Article 3.5, all decisions relating to any recall, market withdrawal or other corrective action with respect to the Product shall be decided by the SC as set forth in Article 3.6; provided that in the event that the Parties take different positions with respect to recall, market withdrawal or other corrective action with respect to the Product, then Radius shall have the right to cease supplying bulk substance of Compound or Semi-Product to Eisai for Japan if, after good faith discussions with Eisai, Radius reasonably believes that that continued supply to Eisai exposes Radius to liability as a result of its decision with respect to the Territory. If Radius elects to cease supply, it will terminate supply in an orderly manner, as soon as practical and in accordance with a schedule agreed to by Eisai and Radius. In the event of a recall, market withdrawal or other corrective action with respect to the Product in Japan, and at Radius’ request, Eisai shall provide reasonable assistance to Radius, at Radius’ cost and expense, in conducting any such recall, market withdrawal or other corrective action with respect to the Product in Japan. 5.6 THE WARRANTY IN SECTION 5.4(b) IS IN LIEU OF ANY OTHER WARRANTY WITH RESPECT TO THE PRODUCT, BULK SUBSTANCE OF COMPOUND OR SEMI-PRODUCT SUPPLIED BY RADIUS HEREUNDER, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE).

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!