License pending transfer. Pending the transfers contemplated by Clauses 2.1 and 2.2, PSI Group shall have a license to undertake anything they would be entitled to, had the transfers been effected already, except to enforce at law.
License pending transfer Sample Clauses
Related to License pending transfer
License Transfer Customer may not sublicense, assign, transfer, rent or lease the software or software license except as permitted by HP. HP-branded software licenses are generally transferable subject to HP’s prior written authorization and payment to HP of any applicable fees. Upon such transfer, Customer’s rights shall terminate and Customer shall transfer all copies of the software to the transferee. Transferee must agree in writing to be bound by the applicable software license terms. Customer may transfer firmware only upon transfer of associated hardware.
License Period a. The License is hereby granted in favour of the Licensee for a total period of 15 (fifteen) years from the Commencement Date subject to unless otherwise terminated by Maha-Metro or surrendered by the Successful Bidder/Licensee, in term of provisions of License Agreement. b. The tenure of License Agreement shall commence from the date of handing over of the property business space. c. Tenure of the License Period of any additional space handed over subsequently shall be co- terminus with above period irrespective of date of actual handing over for such additional space. d. There shall be a lock in period of five (05) years from the date of commencement of agreement/ handing over of licensed space. e. Licensee shall have option to exit from the License Agreement immediately after completion of lock in period of 5 (Five) years. For it, Licensee shall have to issue 180 days prior notice to Maha-Metro. Such prior notice intimation can be given after four and half (4 ½) years however option to exit will be available only after five (05) years. f. At no time during the license tenure, the Licensee shall be allowed to surrender partial Licensed Space which has been handed over to the Licensee by Maha-Metro. g. At the end of License period or in the event of termination of this agreement prior to completion of license tenure, for any reason whatsoever, all rights given under this License Agreement shall cease to have effect and the premises shall revert to Maha-Metro, without any obligation to Maha-Metro to pay or adjust any consideration or other payment to the Licensee. h. The tenure shall be inclusive of fitment period as applicable for the tendered space. i. On completion/ termination of License Agreement, the Licensee shall hand over the space with normal wear & tear. The Licensee shall be allowed to remove its assets like temporary structure, furniture, almirahs, air-conditioners, DG sets, equipments, etc. without causing damage to the existing structure. However, the Licensee shall not be allowed to remove any facility, equipment, fixture, etc. which has become an integral part of the development plan of the space. j. At the end of the License Period or sooner determination of this Agreement for any reason whatsoever all rights given under this License Agreement shall cease to have effect and the Licensed Area with all the furniture and fixtures and other assets permanently attached to the Licensed Area shall revert to Maha-Metro without any obligation on part of Maha-Metro to pay or adjust any consideration or other payment to the Licensee. The Licensee voluntarily gives Maha-Metro the right to seal the said Licensed Space(s) and remarket the same as part on its discretion upon Termination of this Agreement. No claim, compensation or damages will be entertained by Maha-Metro on this account.
Valid Transfer This Agreement or, in the case of Additional Accounts, the related Assignment constitutes a valid sale, transfer and assignment to the Trust of all right, title and interest of the Seller in the Receivables and the Collateral Security and the proceeds thereof and all of the Seller's rights, remedies, powers and privileges with respect to the Receivables under the Receivables Purchase Agreement and, upon the filing of the financing statements described in Section 2.01 with the Secretary of State of the State of Delaware and, in the case of the Receivables hereafter created and the proceeds thereof, upon the creation thereof, the Trust shall have a first priority perfected ownership interest in such property, subject to the rights of the Purchased Receivables Owners in any Collateral Security in respect of the Partial Accounts (other than the Vehicles relating to Principal Receivables arising in the Partial Accounts), except for Liens permitted under the Receivables Purchase Agreement. Except as otherwise provided in this Agreement and except for Liens permitted under the Receivables Purchase Agreement or the other Transaction Documents, neither the Seller nor any Person claiming through or under the Seller has any claim to or interest in the Collateral of the Trust. The representations and warranties set forth in this Section 2.03 shall survive the transfer and assignment of the Receivables to the Trust and the issuance of the Notes. Upon discovery by the Seller, the Servicer, the Trust, the Owner Trustee, any Agent or the Trustee of a breach of any of the foregoing representations and warranties, the party discovering such breach shall give prompt written notice to the other parties specified above, and to any Enhancement Providers. In the event of any breach of any of the representations and warranties set forth in this Section 2.03 having a material adverse effect on the interests of the Noteholders, then either the Trustee or the Holders of Notes evidencing not less than a majority of the aggregate Outstanding Dollar Principal Amount of all Notes, by notice then given in writing to the Seller (and to the Trustee, the Trust, any Enhancement Providers and the Servicer if given by the Noteholders), may direct the Seller to purchase the Noteholders' Interest within 60 days of such notice (or within such longer period as may be specified in such notice), and the Seller shall be obligated to make such purchase on a Payment Date occurring within such 60-day period on the terms and conditions set forth below; provided, however, that no such purchase shall be required to be made if, by the end of such 60-day period (or such longer period as may be specified), the representations and warranties set forth in this Section 2.03 shall be satisfied in all material respects, and any material adverse effect on the Noteholders' Interest caused thereby shall have been cured. The Seller shall deposit in the Collection Account in immediately available funds on the Business Day preceding such Payment Date, in payment for such purchase of the Noteholders' Interest, the Reassignment Amount for such Payment Date. Notwithstanding anything to the contrary in this Agreement, such amounts deposited in the Collection Account shall be applied in accordance with Section 706 of the Indenture and shall be allocated pro rata among the then-outstanding Series based on their respective Series Nominal Liquidation Amounts. If the Trustee or the Noteholders give notice directing the Seller to purchase the Noteholders' Interest as provided above, the obligation of the Seller to purchase the Noteholders' Interest pursuant to this Section 2.03 shall constitute the sole remedy respecting an event of the type specified in the first sentence of this Section 2.03 available to the Noteholders (or the Trustee on behalf of the Noteholders).
Sublicense Rights Licensee shall not have the right to grant sublicenses under the licenses granted to it under Section 2.1(a) (Development and Commercialization License to Licensee) and Section 6.3(d) (Use of Coherus Trademark), without the prior written consent of Coherus, which consent may be withheld [***], except with respect to [***], in which case [***]. For the avoidance of doubt, it shall be [***] with respect to [***]. If Coherus consents in writing to allow Licensee to grant a sublicense, then Licensee may grant such sublicense, through [***], subject to the following: (a) each Sublicensee shall agree to be bound by all of the applicable terms and conditions of this Agreement; (b) the terms of each sublicense granted by Licensee shall provide that the Sublicensee shall be subject to the terms and conditions of this Agreement; (c) Licensee’s grant of any sublicense shall not relieve Licensee from any of its obligations under this Agreement; (d) Licensee shall be liable for any breach of a sublicense by a Sublicensee to the extent that such breach would constitute a breach of this Agreement, and any breach of the sublicense by such Sublicensee shall be deemed a breach of this Agreement by Licensee to the extent that such breach would constitute a breach of this Agreement as if Licensee had committed such breach; provided, however, that in each instance of any breach, Licensee and/or Sublicensee shall have the right to cure any such breach pursuant to the terms of this Agreement; and (e) Licensee will notify Coherus of the identity of any Sublicensee, and the territory in which it has granted such sublicense, promptly after entering into any sublicense. Notwithstanding anything to the contrary in this Agreement, for clarity, Licensee shall not have the right to grant sublicenses under Section 2.1 (License Grants) to any Third Party to Manufacture Products or to conduct Process Development.
License Terms This license is for one full Semester. It cannot be cancelled or terminated except under the conditions cited in this license.
Software License Terms (a) Software that is made available by a Provider to Recipient in connection with any Service (any such Software being referred to herein as “TSA-Licensed Software”) provided hereunder will be subject to the terms set forth in this Section 3.5 except as otherwise provided in the applicable Service Schedule. The Provider hereby grants to the Recipient a non-exclusive, non-transferable license to use, in object code form, any TSA-Licensed Software that is made available by the Provider pursuant to a Service Schedule. For the avoidance of doubt, the Provider that makes available any TSA-Licensed Software in connection with the provision of any Service retains the unrestricted right to enhance or otherwise modify such TSA-Licensed Software at any time, provided that such enhancements or other modifications do not disrupt the provision of such Service to the Recipient. (b) The Recipient may not exceed the number of licenses, agents, tiers, nodes, seats, or other use restrictions or authorizations, if any, specified in the applicable Service Schedule. Some TSA-Licensed Software may require license keys or contain other technical protection measures. The Recipient acknowledges that the Provider may monitor the Recipient’s compliance with use restrictions and authorizations remotely, or otherwise. If the Provider makes a license management program available which records and reports license usage information, the Recipient agrees to appropriately install, configure and execute such license management program. (c) Unless otherwise permitted by the Provider, the Recipient may only make copies or adaptations of the TSA-Licensed Software for archival purposes or when copying or adaptation is an essential step in the authorized use of TSA-Licensed Software. If the Recipient makes a copy for backup purposes and installs such copy on a backup device, the Recipient may not operate such backup installation of the TSA-Licensed Software without paying an additional license fee, except in cases where the original device becomes inoperable. If a copy is activated on a backup device in response to failure of the original device, the use on the backup device must be discontinued when the original or replacement device becomes operable. The Recipient may not copy the TSA-Licensed Software onto or otherwise use or make it available on, to, or through any public or external distributed network. Licenses that allow use over the Recipient’s intranet require restricted access by authorized users only. (d) The Recipient must reproduce all copyright notices that appear in or on the TSA-Licensed Software (including documentation) on all permitted copies or adaptations. Copies of documentation are limited to internal use. (e) Notwithstanding anything to the contrary herein, certain TSA-Licensed Software may be licensed under the applicable Service Schedule for use only on a computer system owned, controlled, or operated by or solely on behalf of the Recipient and may be further identified by the Provider by the combination of a unique number and a specific system type (“Designated System”) and such license will terminate in the event of a change in either the system number or system type, an unauthorized relocation, or if the Designated System ceases to be within the possession or control of the Recipient. (f) The Recipient will not modify, reverse engineer, disassemble, decrypt, decompile, or make derivative works of the TSA-Licensed Software. Where the Recipient has other rights mandated under statute, the Recipient will provide the Provider with reasonably detailed information regarding any intended modifications, reverse engineering, disassembly, decryption, or decompilation and the purposes therefor. (g) The Recipient may permit a consultant or subcontractor to use TSA-Licensed Software at the licensed location for the sole purpose of providing services to the Recipient. (h) Upon expiration or termination of the Service Schedule under which TSA-Licensed Software is made available, the Recipient will destroy the TSA-Licensed Software. The Recipient will remove and destroy or return to the Provider any copies of the TSA-Licensed Software that are merged into adaptations, except for individual pieces of data in the Recipient’s database. The Recipient will provide certification of the destruction of TSA-Licensed Software, and copies thereof, to the Provider. The Recipient may retain one copy of the TSA-Licensed Software subsequent to expiration or termination solely for archival purposes. (i) The Recipient may not sublicense, assign, transfer, rent, or lease the TSA-Licensed Software to any other person except as permitted in this Section 3.5. (j) The Recipient agrees that the Provider may engage a third party designated by the Provider and approved by the Recipient (such approval not to be unreasonably withheld) to audit the Recipient’s compliance with the Software License terms. Any such audit will be at the Provider’s expense, require reasonable notice, and will be performed during normal business hours. Such third party will be required to execute a non-disclosure agreement that restricts such third party from disclosing confidential information of the Recipient to the Provider, except to the extent required to report on the extent to which the Recipient is not in compliance with the Software License terms.
Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.
Notice of a License Action Grantee shall notify their contract manager of any action impacting its license to provide services under this Contract within five days of becoming aware of the action and include the following: a. Reason for such action; b. Name and contact information of the local, state or federal department or agency or entity; x. Xxxx of the license action; and d. License or case reference number.
Sublicensing Rights (a) The license(s) granted to Intellia in Section 2.1 and to Caribou in Section 2.2 may be sublicensed, in full or in part, by Intellia and Caribou, respectively, (each, the “Sublicensing Party”) by a written agreement to its Affiliates and Third Parties (with the further right to sublicense [***] provided that the following shall likewise apply with respect to sublicenses granted by a Sublicensee), provided, that: (i) the Sublicensing Party will provide to the other Party a copy of any sublicense agreement with a Sublicensee within [***] days of execution thereof, which sublicense agreement may be redacted as necessary to protect commercially sensitive information to the extent such information is not reasonably necessary to determine compliance with this Agreement or to determine the rights granted under any of the Caribou IP or Intellia IP, as applicable (together with an accurate English translation of such sublicense, if applicable) provided that if such agreement is with a Related Party the Sublicensing Party shall provide an unredacted copy thereof; (ii) the Sublicensing Party will be responsible for any and all obligations of such Sublicensee as if such Sublicensee were “Intellia” or “Caribou”, as applicable, hereunder; (iii) any such Sublicensee will agree in writing to be bound by identical obligations as the Sublicensing Party hereunder with respect to the activities of such Sublicensee hereunder; (iv) to the extent that the Sublicensing Party or any Sublicensee grants a sublicense under any intellectual property subject to a Caribou In-License or Intellia Included In-License, as applicable, such sublicense (and such further sublicensee) will be subject to the terms of such Caribou In-License or Intellia Included In-License, including such sublicensee’s compliance with the Required In-License Provisions [***].
License Rights The Recipient must provide a license to its “subject data” to the Federal Government, which license is: (a) Royalty-free, (b) Non-exclusive, and (c) Irrevocable, (2) Uses. The Federal Government’s license must permit the Federal Government to take the following actions provided those actions are taken for Federal Government purposes: (a) Reproduce the subject data, (b) Publish the subject data, (c) Otherwise use the subject data, and (d) Permit other entities or individuals to use the subject data, and
