Licensee “Licensee” means the individual or company that has entered into an Agreement with the Embassy. “Offer” means a response to a solicitation that, if accepted, would bind the offeror to perform the resultant Agreement.
Developer License We grant you a non-assignable, non-sublicensable, non-exclusive, worldwide right and license for the number of Developer(s) indicated in the Order Form to install the Software on any number of Machines in order to internally use the Software to create, develop and test Applications. For clarity, a single Software license may be re-allocated to another Developer in the event that the original Developer is no longer employed by you or has been assigned to a new role where access to the Software will no longer be required on a permanent basis.
Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.
Commercialization Intrexon shall have the right to develop and Commercialize the Reverted Products itself or with one or more Third Parties, and shall have the right, without obligation to Fibrocell, to take any such actions in connection with such activities as Intrexon (or its designee), at its discretion, deems appropriate.
Sublicensees Licensee shall have the right (but not the obligation) to sublicense those rights granted to it under Section 2.1 only as set forth in, and subject to the terms and conditions of, Section 2.5 and this Section 2.3.2, to (a) any Person (other than a Specified Person) with the prior written consent of Lxxxx, which consent will not be unreasonably withheld, conditioned or delayed; provided that Licensee may contract in the ordinary course of business with any Third Party contract research organization (“CRO”) or contract development and manufacturing organization (“CMO”) to handle certain clinical Development or Manufacturing activities, in Licensee’s reasonable discretion, without requiring Lilly’s consent; provided further that such CRO or CMO are working on Licensee’s behalf, (b) any of its Affiliates (only for so long as they remain Affiliates), provided that Licensee provides prior written notice (at least 20 Business Days in advance) to Lilly of any sublicenses to be granted to any Affiliate or its request for approval of any sublicense to be granted to any other Person, which shall include in each case a description of the rights to be granted and the purpose therefor, the identity of the proposed Sublicensee and the countries involved, or (c) a Specified Person. Each Affiliate or other Person to which any such sublicense is granted is referred to herein as a “Sublicensee.” Licensee shall remain responsible for the performance by each of its Sublicensees and shall cause each of its Sublicensees to comply with the applicable provisions of this Agreement, and Licensee shall be liable for the acts or omissions of its Sublicensees under or in connection with this Agreement (as if such acts or omission were those of Licensee). Without limiting the foregoing, Licensee shall: (x) ensure that each of its Sublicensees accepts in writing all applicable terms and conditions of this Agreement, including the non-compete, reporting, audit, inspection and confidentiality provisions hereunder; (y) under the agreements between Licensee and each of its Sublicensees, include a provision pursuant to which either (a) Lilly is named as a third-party beneficiary or (b) a mechanism (for example, a power of attorney) is implemented for Lxxxx to enforce all applicable terms and conditions of this Agreement against the Sublicensee in a manner reasonably satisfactory to Lilly, provided that, in each case, Lxxxx shall not proceed against any Sublicensee unless Lxxxx has first provided Licensee with written notice of the Sublicensee’s breach and Licensee has not, within 90 days after receipt of such notice, caused the Sublicensee to cease the breaching activity or otherwise cure the breach, in each case, to the reasonable satisfaction of Lxxxx; and (z) terminate all relevant agreements with any such Sublicensee in the case of any breach of such terms and conditions by such Sublicensee. A Sublicensee shall have the right to grant further sublicenses, subject to complying with the terms of this Section 2.3.2 with respect to further Sublicensees. For the avoidance of doubt, (i) Licensee will remain directly responsible for all amounts owed to Lilly under this Agreement, and (ii) each Sublicensee is subject to the negative and restrictive covenants set forth in Sections 2.2.1 and 2.4, respectively. Licensee hereby expressly waives any requirement that Lxxxx exhaust any right, power or remedy, or proceed against a subcontractor, for any obligation or performance hereunder prior to proceeding directly against Licensee. Notwithstanding anything to the contrary, (A) all sublicenses granted hereunder shall automatically terminate upon expiration or termination of this Agreement for any reason and (B) if the Parties enter into an agreement pursuant to Section 2.5 with respect to the Product, then as of the effective date of such agreement all sublicenses granted with respect to the Product shall automatically terminate, except as otherwise mutually agreed by the Parties in writing (and in no event shall any negotiations for any such agreement pursuant to Section 2.5 be conditioned on or otherwise affected by whether Lxxxx agrees to allow any such sublicenses to continue).
Licensor any Person from whom a Grantor obtains the right to use any Intellectual Property. Lien: any Person’s interest in Property securing an obligation owed to, or a claim by, such Person, whether such interest is based on common law, statute or contract, including liens, security interests, pledges, hypothecations, statutory trusts, reservations, exceptions, encroachments, easements, rights-of-way, covenants, conditions, restrictions, leases, and other title exceptions and encumbrances affecting Property. Lien Waiver: an agreement, in form and substance satisfactory to Agent, by which (a) for any material Collateral located on leased premises, the lessor waives or subordinates any Lien it may have on the Collateral, and agrees to permit Agent to enter upon the premises and remove the Collateral or to use the premises to store or dispose of the Collateral; (b) for any Collateral held by a warehouseman, processor, shipper, customs broker or freight forwarder, such Person waives or subordinates any Lien it may have on the Collateral, agrees to hold any Documents in its possession relating to the Collateral as agent for Agent, and agrees to deliver the Collateral to Agent upon request; (c) for any Collateral held by a repairman, mechanic or bailee, such Person acknowledges Agent’s Lien, waives or subordinates any Lien it may have on the Collateral, and agrees to deliver the Collateral to Agent upon request; and (d) for any Collateral subject to a Licensor’s Intellectual Property rights, the Licensor grants to Agent the right, vis-à-vis such Licensor, to enforce Agent’s Liens with respect to the Collateral, including the right to dispose of it with the benefit of the Intellectual Property, whether or not a default exists under any applicable License.
Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.
Commercialization License Subject to the terms of this Agreement, including without limitation Section 2.2 and Theravance's Co-Promotion rights in Section 5.3.2, Theravance hereby grants to GSK, and GSK accepts, an exclusive license under the Theravance Patents and Theravance Know-How to make, have made, use, sell, offer for sale and import Alliance Products in the Territory.
Transfer of General Partner’s Partnership Interest A. Except in connection with a Termination Transaction permitted under Section 11.2.B, the General Partner shall not withdraw from the Partnership and shall not transfer all or any portion of its interest in the Partnership (whether by sale, statutory merger or consolidation, liquidation or otherwise), other than to an Affiliate, without the Consent of the Limited Partners, which may be given or withheld by each Limited Partner in its sole and absolute discretion, and only upon the admission of a successor General Partner pursuant to Section 12.1. Upon any transfer of a Partnership Interest in accordance with the provisions of this Section 11.2, the transferee shall become a substitute General Partner for all purposes herein, and shall be vested with the powers and rights of the transferor General Partner, and shall be liable for all obligations and responsible for all duties of the General Partner, once such transferee has executed such instruments as may be necessary to effectuate such admission and to confirm the agreement of such transferee to be bound by all the terms and provisions of this Agreement with respect to the Partnership Interest so acquired. It is a condition to any transfer otherwise permitted hereunder that the transferee assumes, by operation of law or express agreement, all of the obligations of the transferor General Partner under this Agreement with respect to such transferred Partnership Interest, and no such transfer (other than pursuant to a statutory merger or consolidation wherein all obligations and liabilities of the transferor General Partner are assumed by a successor corporation by operation of law) shall relieve the transferor General Partner of its obligations under this Agreement without the Consent of the Limited Partners, in their reasonable discretion. In the event the General Partner withdraws from the Partnership, in violation of this Agreement or otherwise, or otherwise dissolves or terminates, or upon the Incapacity of the General Partner, all of the remaining Partners may elect to continue the Partnership business by selecting a substitute General Partner in accordance with the Act. B. The General Partner shall not engage in any merger, consolidation or other combination with or into another person, sale of all or substantially all of its assets or any reclassification, recapitalization or change of its outstanding equity interests (“Termination Transaction”) unless (1) the Termination Transaction has been approved by a Consent of the Partners and (2) either clause (a) or (b) below is satisfied: (a) in connection with such Termination Transaction all Limited Partners either will receive, or will have the right to elect to receive, for each Common Unit an amount of cash, securities, or other property equal to the product of the REIT Shares Amount and the greatest amount of cash, securities or other property paid to a holder of one REIT Share in consideration of one REIT Share in connection with the Termination Transaction; provided, that, if, in connection with the Termination Transaction, a purchase, tender or exchange offer shall have been made to and accepted by the holders of more than fifty percent (50%) of the outstanding REIT Shares, each Holder of Common Units shall receive, or shall have the right to elect to receive, the greatest amount of cash, securities, or other property which such holder would have received had it exercised its right to Redemption (as set forth in Section 8.6) and received REIT Shares in exchange for its Common Units immediately prior to the expiration of such purchase, tender or exchange offer and had thereupon accepted such purchase, tender or exchange offer and then such Termination Transaction shall have been consummated; or (b) the following conditions are met: (i) substantially all of the assets directly or indirectly owned by the surviving entity are held directly or indirectly by the Partnership or another limited partnership or limited liability company which is the survivor of a merger, consolidation or combination of assets with the Partnership (in each case, the “Surviving Partnership”); (ii) the holders of Common-Equivalent Units own a percentage interest of the Surviving Partnership based on the relative fair market value of the net assets of the Partnership and the other net assets of the Surviving Partnership immediately prior to the consummation of such transaction; (iii) the rights, preferences and privileges of such holders in the Surviving Partnership are at least as favorable as those in effect immediately prior to the consummation of such transaction and as those applicable to any other limited partners or non-managing members of the Surviving Partnership; and (iv) such rights of the Limited Partners include at least one of the following: (a) the right to redeem their interests in the Surviving Partnership for the consideration available to such persons pursuant to Section 11.2.B(a); or (b) the right to redeem their Common Units for cash on terms equivalent to those in effect with respect to their Common Units immediately prior to the consummation of such transaction, or, if the ultimate controlling person of the Surviving Partnership has publicly traded common equity securities, such common equity securities, with an exchange ratio based on the determination of relative fair market value of such securities and the REIT Shares.
SOURCE CODE ESCROW FOR LICENSED PRODUCT If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this clause. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product.
