Licenses of FD Technology to Company Sample Clauses

Licenses of FD Technology to Company. Subject to ADP’s contract rights existing as of the Signing Date under the ADP Contract, FD will grant to the Company a license, with the right to sub-license, to any such FD Technology for research and commercial use in Wheat within the Territory on an exclusive basis (if FD is able to grant exclusive rights) or on a non-exclusive basis (if FD is unable to grant exclusive rights) (each an “FD License Agreement”). FD represents and warrants that the FD Technology listed and described in Exhibit 1 includes all technology necessary for the Transaction. FD represents and warrants that at the Signing Date: (a) The FD Technology exist physically; (b) FD is fully empowered and has the rights to FD Technology necessary to grant the license(s) and rights under this Agreement; and/or (c) There are no unappealable, orders, judgments, injunctions, awards or decrees of any court, governmental or regulatory body or arbitration tribunal against or involving FD Technology. FD represents and states that to their knowledge FD Technology as intended in this Agreement does not constitute an infringement of any Third Party rights, including but not limited to Third Party Intellectual Property in the Territory. FD represents and warrants that at the Signing Date FD Technology includes all available technology for the application of HB4/*** gene in Wheat in the Territory. FD will provide Bioceres all available information in case Bioceres want to perform on their own a FTO study related to FD Technology as well as to the license contracts relevant/relating to the technologies/rights mentioned in Exhibit 1 in the Territory.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs

Related to Licenses of FD Technology to Company

  • Technology License 4.1 Unless any event described in Article 2.2 or 2.3 of this Agreement occurs, all of the technology required to be licensed for any of Party B’s business shall be provided by Party A on an exclusive basis. Party A will try its best to license Party B to use the technology owned by Party A, or re-license Party B to use the technology as approved by the owner. 4.2 The Parties shall negotiate with each other to enter into specific technology license contracts to expressly specify the detail matters such as the technology to be licensed, the method to license the technology, license fees and payment.

  • End User License Agreement This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License. xxxx://xxxxxxxxxxxxxxx.xxx/licenses/by-nc-nd/3.0/ You are free to: Share: to copy, distribute and transmit the work Under the following conditions: Attribution: You must attribute the work in the manner specified by the author (but not in any way that suggests that they endorse you or your use of the work).

  • Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.

  • SOFTWARE LICENSE GRANT Where Product is acquired on a licensed basis the following shall constitute the license grant:

  • Developer License We grant you a non-assignable, non-sublicensable, non-exclusive, worldwide right and license for the number of Developer(s) indicated in the Order Form to install the Software on any number of Machines in order to internally use the Software to create, develop and test Applications. For clarity, a single Software license may be re-allocated to another Developer in the event that the original Developer is no longer employed by you or has been assigned to a new role where access to the Software will no longer be required on a permanent basis.

  • Sublicense Agreements Sublicenses under this Section 2.3 shall be granted only pursuant to written agreements, which shall be subject to and consistent with the terms and conditions of this Agreement. Such Sublicense agreements shall contain, among other things, provisions to the following effect: 2.3.2.1 all provisions necessary to ensure Licensee’s ability to comply with Licensee’s obligation under or not violate the provisions of Sections 4.4, 4.5, 4.6, 5.1, 5.3, 5.4, 8.1 and 11.1; 2.3.2.2 a section substantially the same as Article 9 (Indemnification), which also shall state that the Indemnitees (as defined in Section 9.1) are intended third party beneficiaries of such Sublicense agreement for the purpose of enforcing such indemnification; 2.3.2.3 in the event of termination of the license set forth in Section 2.1.1 above (in whole or in part (e.g., termination of the license as to a Licensed Product or in a particular country)), any existing Sublicense shall terminate to the extent of such terminated license; provided, however, that, for each Sublicensee, upon termination of the license, if the Sublicensee is not then in breach of the Sublicense agreement such that Licensee would have the right to terminate such Sublicense agreement, such Sublicensee shall have the right to obtain a license from Harvard on the same terms and conditions as set forth herein, which shall not impose any representations, warranties, obligations or liabilities on Harvard that are not included in this Agreement, provided that (a) the scope of the license granted directly by Harvard to such Sublicensee shall be coextensive with the scope of the license granted by Licensee to such Sublicensee, (b) if the Sublicense granted to such Sublicensee was non-exclusive, such Sublicensee shall not have the right to participate in the prosecution or enforcement of the Patent Rights under the license granted to it directly by Harvard and (c) if there are more than one Sublicensee, each Sublicensee that is granted a direct license shall be responsible for a pro rata share of the reimbursement due under Section 6.2.3 of this Agreement (based on the number of direct licenses under the Patent Rights in effect on the date of reimbursement); 2.3.2.4 the Sublicensee shall only be entitled to sublicense its rights under such Sublicense agreement on the terms set forth in this Section 2.3; and 2.3.2.5 the Sublicensee shall not be entitled to assign the Sublicense agreement without the prior written consent of Harvard, except that Sublicensee may assign the Sublicense agreement to a successor in connection with the merger, consolidation or sale of all or substantially all of its assets or that portion of its business to which the Sublicense agreement relates; provided, however, that any permitted assignee agrees in writing in a manner reasonably satisfactory to Harvard to be bound by the terms of such Sublicense agreement.

  • Licensed Patents 9.1.1 Oculis shall be responsible for and shall have the exclusive right with respect to, the preparation, filing, prosecution, protection, maintenance and enforcement of all Patent Rights in respect of the Licensed Technology in its discretion using its patent counsel. Oculis shall consult with Accure with respect thereto, supply Accure with a copy of the application as filed, together with notice of its filing date and serial number; and keep Accure advised of the status of actual and prospective Patent Right filings, including office actions, and keep Accure informed about and provide copies of all the relevant information exchanged between Oculis and the different Industrial or Intellectual Property Registration Offices regarding the prosecution, maintenance, defense and enforcement of the Licensed Patents. The cost and expense of filing, prosecuting, maintaining and enforcing all Licensed Patents shall be borne by Oculis. Accure shall, and hereby procures its personnel will, provide all requested information and perform all acts reasonably requested by Oculis in connection with the prosecution, maintenance, defense or enforcement of the Licensed Technology. Without limiting the foregoing, Accure and its Affiliates may not file for further Patent Rights relating to Licensed Technology. 9.1.2 Should Oculis not be interested in the prosecution, defense and maintenance of any or all of the Licensed Patents, and/or Xxxxxx decides not to pay all reasonable and necessary expenses with respect to the prosecution, defense or maintenance of any Licensed Patent before any upcoming deadline, Oculis shall give reasonable advance notice to Accure (no less than [***]), and subsequent to such notice Accure shall act as it deems appropriate in connection with the prosecution, defense and maintenance of the Licensed Patents at their discretion and at their own cost. As from such notification, Oculis shall not be responsible for costs associated with such Licensed Patents, and, where such notification is provided following such time as Xxxxxx assumes responsible for performing patenting matters as set forth above, Oculis shall not be responsible for the preparation, filing, prosecution, protection and maintenance of the mentioned Licensed Patents and such Patent Rights shall cease to be Licensed Patents and the provisions of Agreement shall be of no further effect with respect to such patent and/or country of the Territory.

  • NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT INFRINGEMENT The provisions of this clause shall be applicable only if the amount of this Agreement exceeds $100,000. (a) The Contractor shall report to the Government through BSA promptly and in reasonable written detail, each notice or claim of patent or copyright infringement based on the performance of this Agreement of which the Contractor has knowledge. (b) In the event of any claim or suit against the Government on account of any alleged patent or copyright infringement arising out of the performance of this Agreement or out of the use of any supplies furnished or work or services performed hereunder, the Contractor shall furnish to the Government when requested by the Government or BSA, all evidence and information in possession of the Contractor pertaining to such suit or claim. Such evidence and information shall be furnished at the expense of the Government except where the Contractor has agreed to indemnify the Government or BSA. (c) This clause shall be included in all subcontracts.

  • INTELLECTUAL PROPERTY RIGHTS - INVENTION AND PATENT RIGHTS A. General 1. NASA has determined that 51 U.S.C. § 20135(b) does not apply to this Agreement. Therefore, title to inventions made (conceived or first actually reduced to practice) under this Agreement remain with the respective inventing party(ies). No invention or patent rights are exchanged or granted under this Agreement, except as provided herein.

  • Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY. (b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item. (c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!