TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES The goal of this task is to develop a plan to make the knowledge gained, experimental results, and lessons learned available to the public and key decision makers. • Prepare an Initial Fact Sheet at start of the project that describes the project. Use the format provided by the CAM. • Prepare a Final Project Fact Sheet at the project’s conclusion that discusses results. Use the format provided by the CAM. • Prepare a Technology/Knowledge Transfer Plan that includes: o An explanation of how the knowledge gained from the project will be made available to the public, including the targeted market sector and potential outreach to end users, utilities, regulatory agencies, and others.
o A description of the intended use(s) for and users of the project results. o Published documents, including date, title, and periodical name. o Copies of documents, fact sheets, journal articles, press releases, and other documents prepared for public dissemination. These documents must include the Legal Notice required in the terms and conditions. Indicate where and when the documents were disseminated. o A discussion of policy development. State if project has been or will be cited in government policy publications, or used to inform regulatory bodies. o The number of website downloads or public requests for project results. o Additional areas as determined by the CAM. • Conduct technology transfer activities in accordance with the Technology/Knowledge Transfer Plan. These activities will be reported in the Progress Reports. • When directed by the CAM, develop Presentation Materials for an Energy Commission- sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California Energy Commission. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Prepare a Technology/Knowledge Transfer Report on technology transfer activities conducted during the project. • Initial Fact Sheet (draft and final) • Final Project Fact Sheet (draft and final) • Presentation Materials (draft and final) • High Quality Digital Photographs • Technology/Knowledge Transfer Plan (draft and final) • Technology/Knowledge Transfer Report (draft and final)
Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer:
(a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process;
(b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process;
(c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards);
(d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and
(e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.
Inventions Retained and Licensed I have attached hereto, as Exhibit A, a list describing all inventions, original works of authorship, developments, improvements, and trade secrets which were made by me prior to my employment with the Company (collectively referred to as “Prior Inventions”), which belong to me, which relate to the Company’s proposed business, products or research and development, and which are not assigned to the Company hereunder; or, if no such list is attached, I represent that there are no such Prior Inventions. If in the course of my employment with the Company, I incorporate into a Company product, process or machine a Prior Invention owned by me or in which I have an interest, the Company is hereby granted and shall have a nonexclusive, royalty-free, irrevocable, perpetual, worldwide license to make, have made, modify, use and sell such Prior Invention as part of or in connection with such product, process or machine.
Inventions Assigned to the United States I agree to assign to the United States government all my right, title, and interest in and to any and all Inventions whenever such full title is required to be in the United States by a contract between the Company and the United States or any of its agencies.
Third Party Technology The Company makes use of third party technology to collect information required for traffic measurement, research, and analytics. Use of third party technology entails data collection. We therefore would like to inform clients the Company enables third parties to place or read cookies located on the browsers of users entering the Company’s domain. Said third parties may also use web beacons to collect information through advertising located on the Company’s web site. Please note that you may change your browser settings to refuse or disable Local Shared Objects and similar technologies; however, by doing so you may be disabling some of the functionality of Company’s services.
Virginia Tech question Does the vendor acknowledge, agree, and understand that the terms and conditions of the RFP # 952642206 shall govern the contract if a contract is awarded to your company?
Patent/Copyright Materials/Proprietary Infringement Unless otherwise expressly provided in this Contract, Contractor shall be solely responsible for clearing the right to use any patented or copyrighted materials in the performance of this Contract. Contractor warrants that any software as modified through services provided hereunder will not infringe upon or violate any patent, proprietary right or trade secret right of any third party. Contractor agrees that, in accordance with the more specific requirement contained in paragraph 18 below, it shall indemnify, defend and hold County and County Indemnitees harmless from any and all such claims and be responsible for payment of all costs, damages, penalties and expenses related to or arising from such claim(s), including, but not limited to, attorney’s fees, costs and expenses.
INTELLECTUAL PROPERTY RIGHTS - DATA RIGHTS A. Data produced under this Annex which is subject to paragraph C. of the Intellectual Property Rights - Data Rights Article of the Umbrella Agreement will be protected for the period of one year.
B. Under paragraph H. of the Intellectual Property Rights - Data Rights Article of the Umbrella Agreement, Disclosing Party provides the following Data to Receiving Party. The lists below may not be comprehensive, are subject to change, and do not supersede any restrictive notice on the Data provided.
Parent Right to Access and Challenge Student Data The LEA shall establish reasonable procedures pursuant to which a parent, as that term is defined in 105 ILCS 10/2(g), may inspect and/or copy Student Data and/or challenge the accuracy, relevance or propriety of Student Data, pursuant to Sections 5 and 7 of ISSRA (105 ILCS 10/5; 105 ILCS 10/7) and Section 33 of SOPPA (105 ILCS 85/33). The Provider shall respond to any request by the LEA for Student Data in the possession of the Provider when Provider cooperation is required to afford a parent an opportunity to inspect and/or copy the Student Data, no later than 5 business days from the date of the request. In the event that a parent contacts the Provider directly to inspect and/or copy Student Data, the Provider shall refer the parent to the LEA, which shall follow the necessary and proper procedures regarding the requested Student Data.
Infringement of Intellectual Property Rights Seller (or its supplier) shall indemnify and hold Purchaser harmless against an award of damages and costs against Purchaser by a final judgment of a court of last resort in the country in which the Equipment is originally installed by Seller resulting from actual or alleged patent infringement relating in any way to use or sale of the Equipment, or any component thereof furnished hereunder, provided that Purchaser (i) gives Seller immediate notice in writing of any suit or claim for infringement against Purchaser, (ii) permits Seller (or its supplier) to control the defense of any suit or claim, and (iii) gives Seller (or its supplier) all available information, assistance, and authority to enable Seller (or its supplier) to assume such defense. Seller (or its supplier) shall diligently defend and prosecute all such patent infringement litigation and shall keep Purchaser fully informed of all developments in the defense or adjustments of any such claim or action. If a final injunction or judgment in any patent infringement action is rendered restraining Purchaser’s use of the Equipment, or of any component thereof, Seller shall, at its option and expense, either (i) procure for Purchaser the right to use the Equipment, or (ii) replace or modify the infringing component so that it no longer infringes, or (iii) repurchase the Equipment upon its return to Seller, less reasonable depreciation of 2% per month from date of installation, for use, damage, or obsolescence. Seller shall have no liability whatsoever to Purchaser if any such patent infringement or claim thereof is based upon or arises from (i) the use of any Equipment in combination with an apparatus or device not manufactured or supplied by Seller and such combination cause the infringement, (ii) the use of any Equipment in a manner for which it was neither designed nor contemplated, or (iii) any modification of any Equipment by Purchaser, or by Seller at Purchaser’s request, or by any third party, which causes the Equipment to become infringing.
