Maintenance Renewal Sample Clauses

Maintenance Renewal. For so long as Micro Focus continues to offer Maintenance for the Maintained Software, Licensee may, subject to Micro Focus’ acceptance, renew Maintenance by delivering a purchase order or executing the quote for the applicable Maintenance fees on or about each Renewal Date. If Licensee renews M a i n t e n a n c e Licensee must purchase Maintenance for all licenses of the Maintained Software that it has copied, used, or otherwise exploited. Micro Focus may increase Maintenance fees by up to 10% over the previous year’s fees or such greater amount necessary to increase the support fee to the then-current maintenance list price. If Licensee allows Maintenance to lapse or payment of the Maintenance fee for a Renewal Period is not received by the due date, Micro Focus may immediately and without notice suspend provision of Maintenance and Licensee will no longer be eligible for the 10% limitation on price increases for the current and subsequent years set forth above. Licensee may then reinstate Maintenance in accordance with the Reinstatement clause below. Licensee will also no longer be eligible for the 10% limitation on price increases if Licensee does not renew Maintenance for all copies of the Maintained Software or Licensee reduces the number of copies of the Maintained Software.
Sample 1Sample 2See All (7)
AutoNDA by SimpleDocs
Maintenance Renewal. The Sub Agent undertakes to inform the Underwriting Agent of any changes during the duration of the policy (including renewal), which would affect the Underwriting Agent’s attitude to covers or levels of premiums or which the Underwriting Agent should be made aware. The Sub Agent must liaise with the Underwriting Agent prior to each renewal to enable the Underwriting Agent to provide notification of renewal terms or non-renewal in good time to allow the Sub Agent to meet its regulatory obligations to customers in this respect.
Sample 1Sample 2Sample 3See All (5)
Maintenance Renewal. Reseller shall use commercially reasonable efforts to ensure that all End Users annually renew the Maintenance and Support Program. At the request of BlueCat, Reseller shall provide details of each renewal End User.
Sample 1Sample 2See All (4)
Maintenance Renewal. 7.1 For so long as Micro Focus continues to offer Support Services for the Maintained Software and subject to clause 2.1 above and 12.4 below, Licensee may, subject to Micro Focus´ acceptance, renew the Support Services by delivering Micro Focus a purchase order or executing the quote generated by Micro Focus referencing these Support Services for the applicable Maintenance Fee for each copy of the Maintained Software on or about each Renewal Date or by allowing this Agreement to automatically renew pursuant to clause 2.1. If the parties agree to renew the Support Services or if Licensee permits this Agreement to automatically renew, Licensee must do so for all licensed copies in its possession of the Micro Focus software product(s) for which Support Services are renewed. Maintenance Fees will be due for payment by Licensee by the later of (i) thirty (30) days from the date of invoice or (ii) such Renewal Date. Micro Focus may increase Maintenance Fees by up to 10% over the previous year’s fees. If payment of the Maintenance Fee for the new Renewal Period is not received by the due date, Micro Focus may immediately and without notice suspend the provision of Support Services for the Maintained Software and Licensee will no longer be eligible for the 10% limitation on price increases for the current and subsequent years set forth above. Licensee may then reinstate the Support Services in accordance with Clause 7.2 below. 7.2 If Licensee elects not to renew the Support Services or allows the Support Services to lapse and the Micro Focus software products have been off Support Services for less than one (1) year, Licensee can reinstate Support Services for such Micro Focus software products by paying for a new Support Services term of not less than twelve (12) months, plus the following charges: 7.2.1 if the Maintained Software is the most then current version of such software product, by paying to Micro Focus the applicable Maintenance Fees backdated to such date when the previous Support Services term had expired or terminated and a 20% reinstatement fee (calculated at 20% of the applicable annual Maintenance Fee), or 7.2.2 if the Maintained Software is not the most then current version of such software product, an upgrade fee equal to 40% of the then current license fee list price of the most then current version of such software product. 7.3 If the Micro Focus software product has been off Support Services for longer than one (1) year, Licensee will be re...
Sample 1
Maintenance Renewal. 7.1 For so long as Micro Focus continues to offer Support Services for the Maintained Software and subject to clause 2.1 above and 12.4 below, Licensee may, subject to Micro Focus´ acceptance, renew the Support Services by delivering Micro Focus a purchase order or executing the quote generated by Micro Focus referencing these Support Services for the applicable Maintenance Fee for each copy of the Maintained Software on or about each Renewal Date. If the parties agree to renew the Support Services, Licensee must do so for all licensed copies in its possession of the Micro Focus software product(s) for which Support Services are renewed. Maintenance Fees will be due for payment by Licensee by the later of (i) thirty (30) days from the date of invoice or (ii) such Renewal Date. If payment of the Maintenance Fee for the new Renewal Period is not received by the due date, Micro Focus may immediately and without notice suspend the provision of Support Services for the Maintained Software and Licensee will no longer be eligible for the 10% limitation on price increases for the current and subsequent years set forth above. Licensee may then reinstate the Support Services in accordance with Clause 7.2 below. 7.2 If Licensee elects not to renew the Support Services or allows the Support Services to lapse and the Micro Focus software products have been off Support Services for less than one (1) year, Licensee can reinstate Support Services for such Micro Focus software products by paying for a new Support Services term of not less than twelve (12) months, plus the following charges: 7.2.1 if the Maintained Software is the most then current version of such software product, by paying to Micro Focus the applicable Maintenance Fees backdated to such date when the previous Support Services term had expired or terminated or
Sample 1Sample 2
Maintenance Renewal. Company shall be responsible for generating quotes, receiving purchase orders, invoicing and collecting all Maintenance Renewals from End User customers.
Sample 1
Maintenance Renewal. Partner shall use commercially reasonable efforts to ensure that all End Users renew the Products or Managed Services. At the request of BlueCat, Partner shall provide details of each renewal End User.
Sample 1
AutoNDA by SimpleDocs
Maintenance Renewal. Maintenance and support services under this Agreement for Software licensed under any Software Attachments are provided for a fixed term of twelve (12) months and automatically renew on an annual basis unless terminated by either party on not less than three (3) months’ notice in writing given at any time prior to the relevant renewal date. If the agreement for the provision of maintenance and support services terminates or otherwise expires and the Customer subsequently wishes to renew maintenance and support services, Customer shall pay the support fees that would have been due for the period during which maintenance and support services were not provided plus a reinstatement fee in accordance with Supplier’s then current reinstatement policy.
Sample 1
Maintenance Renewal. A Software Maintenance renewal reminder will be sent electronically to Licensee thirty (30) days prior to Maintenance expiration. The Renewal reminder will include instructions on how to renew maintenance on-line. This Software Maintenance Plan will be considered renewed once a purchase order has been issued or payment is received. If Maintenance has not been renewed, another Software Maintenance renewal reminder will be sent on the expiration date and again thirty (30) days after the expiration date. Maintenance will be terminated if a purchase order or a payment is not received on or before the expiration date. Licensee has 90 days to reinstate Maintenance for the regular maintenance fee outlined in (4) after Maintenance has been terminated. If Maintenance has been expired for 90 or more days, Licensee may reinstate maintenance by purchasing an Upgrade.
Sample 1

Related to Maintenance Renewal

  • Maintenance & Repairs 5.1 Lessee shall at all times be responsible for maintaining at its own expense the leased premises in a clean, orderly and safety condition, except as hereinafter provided. Lessee shall be responsible, at its own expense, to clean and maintain all trade fixtures, machinery and equipment furnished by Lessee within the leased premises. Lessee shall be responsible to deposit normal office waste and rubbish at a location at the Central School as designated by Lessor. 5.2 Lessee shall be responsible to perform all repairs the need for which is caused by Xxxxxx's use of the premises except that Lessor shall be responsible to perform major repairs of a structural nature. Lessor shall be responsible to arrange for removal of waste and rubbish from the location designated as the deposit location for lessees. All costs incurred by Lessor pursuant to the obligations of this Paragraph shall be included within "operating costs". 5.3 Lessor shall provide custodian services for the common areas of Central School. Costs incurred by Lessor in providing such custodian services shall be included within "operating costs".

  • Planned Maintenance (a) Subject to any modification or amendment of this Agreement made pursuant to Section 4.2(c) or Section 7.3(d), Planned Maintenance occurring during the Delivery Term shall be coordinated and scheduled in accordance with this Section 9.6. Seller shall perform all Planned Maintenance (including Major Planned Maintenance) in a manner that optimizes the generation and benefits to Buyer of the Contract Energy, Storage Energy, and other Products (e.g., during off-peak periods and low-irradiance periods) and, without limiting the foregoing, either (i) outside of Daylight Hours or (ii) during the months of October and November only, during Daylight Hours; provided, however, that the foregoing restrictions shall not apply to any Planned Maintenance that Seller is required to perform pursuant to any applicable manufacturer warranty that cannot reasonably be performed by Seller subject to such restrictions. (b) Seller shall deliver to Buyer a proposed schedule for Planned Maintenance in respect of each Contract Year (“Planned Maintenance Schedule”) no later than ninety (90) Days before the start of such Contract Year. Planned Maintenance Schedules submitted by Seller shall (i) comply with the second sentence of Section 9.6(a) and (ii) include reasonably detailed descriptions of the Planned Maintenance to be performed, the Days and times in which each type of Planned Maintenance is scheduled to be performed, the estimated amount(s) of Contract Capacity and Storage Capacity that will be unavailable due to Planned Maintenance and the total number of hours that Seller expects that the Contract Capacity and Storage Capacity will be unavailable due to Planned Maintenance. The general form for the Planned Maintenance Schedule is set forth in Schedule 9.6. (The Planned Maintenance descriptions reflected in the general form set forth in Schedule 9.6 are provided for indicative purposes only, and are not necessarily representative of the detail, time periods, or certainty required for a Planned Maintenance Schedule hereunder.) (c) Buyer shall have the right to disapprove, in its reasonable discretion (provided that Buyer shall have the right to disapprove, in its sole and absolute discretion, any Planned Maintenance proposed by Seller that is inconsistent with the terms of this Agreement), any Planned Maintenance set out in any Planned Maintenance Schedule proposed by Seller for any Contract Year, except for any Planned Maintenance that (i) is scheduled to occur outside of Daylight Hours or during Daylight Hours during the months of October and November or (ii) Seller is required to perform pursuant to any applicable manufacturer warranty and that is scheduled to occur in compliance with Section 9.6(a). If Seller submits its Planned Maintenance Schedule for a Contract Year in accordance with the requirements of this Agreement and Buyer does not disapprove of any Planned Maintenance set out in such Planned Maintenance Schedule by sixty (60) days after submission, then such Planned Maintenance Schedule shall be deemed approved. If Buyer, in the exercise of its discretion as set forth above, disapproves any Planned Maintenance in such Planned Maintenance Schedule within the applicable time period specified above after its submission, Buyer shall notify Seller and the Parties shall use Commercially Reasonable Efforts to agree upon and finalize a mutually acceptable Planned Maintenance Schedule for the applicable Contract Year. Seller shall conduct Planned Maintenance during such Contract Year only in accordance with an agreed Planned Maintenance Schedule; provided, however, that Seller may (A) move Planned Maintenance included in an agreed Planned Maintenance Schedule that is not Major Planned Maintenance, so long as such move is consistent with the terms of this Agreement (including the second sentence of Section 9.6(a)) or, with respect to Major Planned Maintenance, if such Major Planned Maintenance is scheduled to occur outside of Daylight Hours or during Daylight Hours during the months of October and November and (B) schedule and perform Planned Maintenance not reflected in the Planned Maintenance Schedule so long as such Planned Maintenance is scheduled to be performed outside of Daylight Hours or during Daylight Hours during the months of October and November and Seller provides Buyer at least two (2) weeks’ prior written notice of such Planned Maintenance; provided further that Buyer shall have the right to advise Seller of periods when Buyer prefers, based on solar irradiance, supply, market and other conditions, that any Major Planned Maintenance be deferred, and Seller shall use Commercially Reasonable Efforts to comply with such request. (d) Seller shall use Commercially Reasonable Efforts to complete any Planned Maintenance and place the Facility back into full commercial operation as soon as reasonably possible. If Seller determines that any Planned Maintenance scheduled in an agreed Planned Maintenance Schedule no longer needs to be completed or will not consume the entire time scheduled therefor in the agreed Planned Maintenance Schedule, Seller shall provide (i) a Generation Forecast to Buyer reflecting the forecasted amount of Delivered Energy during each affected interval that takes into account such change and (ii) in the case of any Major Planned Maintenance, a written notice declaring the cessation and termination of the applicable Major Planned Maintenance period (in which event, the Major Planned Maintenance period shall terminate in accordance with the terms of such Generation Forecast and written notice).

  • Vehicle Maintenance 16.1 You must report to thl as soon as possible, where the oil is above or below the recommended level or the warning indication light is illuminated. 16.2 You must add water/coolant to the cooling system and an appropriate Australian Society of Automotive Engineers rated oil for petrol or diesel powered vehicles (as applicable) to the engine if the indicator level is below minimum. 16.3 You agree to maintain the Vehicle in these conditions and acknowledge that any mechanical damage occasioned as a result of Your failure to maintain the Vehicle in accordance with this clause must be paid by You.

  • Property Maintenance Maintain all of its property that is necessary to or useful in the proper conduct of its business in good working condition, ordinary wear and tear excepted.

  • Maintenance and Insurance (a) The Company shall maintain or cause to be maintained, at its own expense, all of its assets and properties in good working order and condition, making all necessary repairs thereto and renewals and replacements thereof. (b) The Company shall maintain or cause to be maintained, at its own expense, insurance in form, substance and amounts (including deductibles), which the Company deems reasonably necessary to the Company's business, (i) adequate to insure all assets and properties of the Company, which assets and properties are of a character usually insured by persons engaged in the same or similar business against loss or damage resulting from fire or other risks included in an extended coverage policy; (ii) against public liability and other tort claims that may be incurred by the Company; (iii) as may be required by the Transaction Documents and/or applicable law and (iv) as may be reasonably requested by Secured Party, all with adequate, financially sound and reputable insurers.

  • MAINTENANCE & REPAIR Tenant agrees that if there is any delay in maintenance or repairs for reasons beyond Landlord's control, this shall have no effect on Tenant's obligations under this lease.

  • Maintenance, Etc The Company will maintain, preserve and keep, and will cause each Consolidated Subsidiary to maintain, preserve and keep, its properties which are used in the conduct of its business (whether owned in fee or a leasehold interest) in good repair and working order, ordinary wear and tear excepted, and from time to time will make all necessary repairs, replacements and renewals as the Company may determine to be appropriate to the conduct of its business.

  • System Maintenance The Trust understands that USBFS will perform periodic maintenance to the System(s), which may cause temporary service interruptions. To the extent possible, USBFS shall notify the Trust of all planned outages and will perform any necessary maintenance during non-business hours.

  • Scheduled Maintenance Maintenance window for disruptive work to Service will be limited 12:00 A.M. to 4:00 A.M., Central Daylight Time (CDT), any day with requirement of one (1) calendar week notification to Customer prior to maintenance. LightEdge will send an e-mail notification of such disruptive maintenance to Service to Authorized Contacts of Customer. Once notification is sent to Customer this will be considered a “Scheduled Maintenance”. Any Service SLAs will NOT apply during a Scheduled Maintenance.

  • Software Maintenance Subrecipient shall apply security patches and upgrades in a timely manner and keep virus software up-to-date on all systems on which State data may be stored or accessed.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!