Manufacture and Sale of Product Initial Purchase of Inventory
Manufacture and Sale of Product Initial Purchase of Inventory Sample Clauses
Related to Manufacture and Sale of Product Initial Purchase of Inventory
Sale of Products (a) All shipments, services, sales and quotations between Axitec, LLC. (“Seller”) and the purchaser (“Purchaser”) of Products set forth herein (“Products”) shall be subject to these Terms and Conditions of Sale (these “Terms” or this “Agreement”). Purchaser acknowledges receipt hereof and accepts these Terms. ANY ADDITIONAL OR DIFFERENT TERMS OR CONDITIONS CONTAINED IN ANY RESPONSE HERETO BY PURCHASER OR IN PURCHASER’S INITIAL ORDER AND ANY ASSERTIONS BY THE SALES REPRESENTATIVE THAT ARE NOT EXPRESSLY DESCRIBED IN THESE TERMS AND CONDITIONS OF SALE OUTSIDE OF THESE EXPRESSED TERMS AND CONDITIONS ARE HEREBY REJECTED BY SELLER AND SHALL BE OF NO EFFECT NOR IN ANY CIRCUMSTANCES BINDING ON SELLER. Seller’s acceptance of any order offered by Purchaser is EXPRESSLY MADE CONDITIONAL on Purchaser’s assent to these Terms, and under no circumstances will any terms other than these Terms apply to Seller’s sale of the Products. (b) Seller’s quotations are not binding on Seller after 10 business days of submission of quotation. Each order of Products shall be in writing and no order of Purchaser shall be binding on Seller until the earlier of (i) payment of products has occurred or payment terms have been established and shipping arrangements have been made (ii) shipment to Purchaser of Products or (iii) transmittal of a written acceptance by Seller. Seller’s failure to respond to Purchaser’s order within two (2) weeks after receipt of the order shall be considered a rejection of the order. (c) Purchaser may cancel any order before it has become binding pursuant to subsection (b) above. Seller may cancel all accepted orders and deliveries of Products if (i) Purchaser makes an assignment for the benefit of creditors, (ii) becomes party to a voluntary or involuntary proceeding of insolvency, bankruptcy or reorganization, (iii) generally becomes unable to pay its debts as they become due, (iv) fails to remit payment to Seller in accordance with the terms hereof or under any other agreement between Seller and Purchaser, or (v) breaches any other term, provision or condition contained in these Terms. (vi) in cases where fraud and deceit is evident in the payment of products (d) All references in sales brochures, data sheets and offers as to specifications, price and other details of the Products are approximate and shall not be binding on the Seller unless expressly agreed to in writing. Seller may, from time to time, update and replace Products in its line. Seller reserves the right to substitute updated Products, provided that such updated Products meet the specifications of the ordered Products in all material respects and are sold for the same price as the ordered Products. (e) Purchaser acknowledges that Seller’s acceptance of any purchase order is dependent on Seller’s prior approval of Purchaser’s business credit and personal credit with personal guarantee where warranted. Purchaser acknowledges that Seller may demand assurances of Purchaser’s ability to pay by requesting such trade or banking references or a letter of credit or such other information as deemed adequate by Seller.
Purchase of Products You agree to purchase from Us the hardware products, software licenses and services listed on the Order Form, together with all existing accessories, attachments, replacements, and additions (collectively the “Products”) upon the terms stated herein. For the avoidance of doubt, postage meters for use in mailing machines are excluded from the definition of Products. This Purchase Agreement is binding on You as of the date You sign it. This Purchase Agreement is not binding on Us until We sign it or until the Products are shipped, whichever happens first.
Purchase and Sale of Products (a) Pursuant to Purchase Orders issued by MLNA/MLMX, Supplier shall sell and deliver to MLNA/MLMX, and MLNA/MLMX shall purchase from Supplier, Products specified in Purchase Orders. Such purchases and sales shall be for Products and Prices set forth on Schedule A. Any Affiliate of MLNA/MLMX shall also be entitled to issue Purchase Orders and purchase Products from Supplier under the terms of this Agreement. Only the specific MLNA/MLMX Party issuing a Purchase Order will be liable to Supplier for obligations in connection with a Purchase Order. Neither MLNA or MLMX or any Affiliate of either of them will be liable to Supplier for any obligations of any other MLNA/MLMX Party or Affiliate. (b) During the term hereof, MLNA/MLMX may, but shall not be required to, provide Supplier with estimates or forecasts of MLNA/MLMX´s requirements for Products from Supplier. Any forecasts or estimates are for information purposes only and may be modified by MLNA/MLMX at any time and in its sole discretion. Any product quantities cited in or pursuant to this Agreement, except for quantities cited in a Purchase Order as firm, are preliminary and non-binding only. MLNA/MLMX makes no representation, warranty or agreement as to the quantity of products that it will purchase from Supplier, if any, or that MLNA/MLMX will buy Products exclusively from Supplier. (c) MLNA/MLMX shall issue Purchase Orders to Supplier and Supplier shall confirm to MLNA/MLMX the receipt of each Purchase Order issued hereunder (each, a "Confirmation") within [NUMBER] Business Days following Supplier's receipt thereof. Each Confirmation must reference MLNA/MLMX's Purchase Order number and confirm acceptance of the Purchase Order unless Supplier timely advises MLNA/MLMX that Supplier is unwilling to accept any terms or conditions in the applicable Purchase Order that conflict with the terms and conditions of this Agreement. If Supplier fails to issue a Confirmation within the time set forth above or otherwise commences performance under such Purchase Order, Supplier will be deemed to have accepted the Purchase Order. MLNA/MLMX may withdraw any Purchase Order prior to Supplier's acceptance (or deemed acceptance) thereof. (d) MLNA/MLMX may, in its sole discretion, on notice to Supplier, without liability or penalty, terminate all or any part of a Purchase Order with or without cause effective immediately or otherwise as specified in such notice. Upon any such termination, Supplier shall immediately cease work and purchasing materials relating to fulfilling the Purchase Order, and deliver to MLNA/MLMX on request all or any portion of Products under the relevant Purchase Order at the Prices. (e) MLNA/MLMX may, on notice to Supplier, request changes to a Purchase Order. On or before the second Business Day after receiving the request, Supplier shall submit to MLNA/MLMX its good faith description of the impact of such changes on the Basic Purchase Order Terms. MLNA/MLMX may then submit an amended Purchase Order reflecting all MLNA/MLMX-accepted changes.
Manufacture and Supply As between the Parties, Otsuka shall be responsible for, shall bear all costs associated with, and shall have all decision-making authority over, all Manufacturing Activities (subject to discussion of CMC matters with Acucela through the JDC or applicable Operating Team as discussed below); provided, that Otsuka shall supply Licensed Product to Acucela or its permitted subcontractors for use in clinical trials conducted in accordance with each Development Plan and, if applicable, Commercialization Plan (i.e., Phase 3b Clinical Trials or Post-Approval Studies, if any), free of charge and in such quantities as are agreed by the JDC or the JCC (as applicable) or are otherwise required to seek or obtain Regulatory Approval. In addition, if and after Acucela exercises an Opt-In Right under Section 3.1, Otsuka shall supply promotional samples of Licensed Product to Acucela for use in its performance of Co-Promotion, in such quantities and on such terms as are determined by the JCC. The cost of promotional samples of Licensed Product, which shall be included in Commercialization Costs, shall be established by the JCC based on Otsuka’s per-unit cost to manufacture such promotional samples (but, for the avoidance of doubt, Otsuka shall have no obligation to disclose any information relating to its manufacturing costs), but in no event shall such promotional sample cost exceed * per promotional sample unless mutually agreed otherwise by the Parties. Acucela’s and its permitted subcontractors’ obligations to conduct Development activities, and upon Acucela’s exercise of its Opt-in Right pursuant to Section 3.1, to conduct Development and Commercialization activities, shall be expressly conditioned upon Otsuka fulfilling its Licensed Product supply obligations as set forth in the Development Plan or the Commercialization Plan, as applicable. To the extent that Otsuka reasonably believes is necessary for performance of Development or Commercialization, Otsuka agrees to keep Acucela reasonably informed from time to time, through the JDC, JCC or applicable Operating Team, regarding the general status of Manufacturing Activities related to the Licensed Product (including Other Indication Product(s), as applicable) and from time to time shall update Acucela on any foreseeable delays and/or other material issues relating to Manufacturing the Licensed Product (including Other Indication Product(s), as applicable). Through the JDC or applicable Operating Team, Otsuka and Acucela shall confer and discuss CMC matters, and Otsuka agrees to consider suggestions of Acucela regarding CMC matters.
Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.
Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.
Sale of Inventory Purchaser shall purchase (or shall cause its Affiliates to purchase) the Inventory in separate transactions in accordance with the terms and conditions contained in the Supply Agreement. It is agreed and understood by and between the Parties that the Purchase Price does not include the Inventory.
Supply of Products 3.1 The Supplier warrants that the Products shall: (a) correspond with their description and any applicable Product Specification; (b) conform in all respects with the Order and any relevant sample; (c) be of satisfactory quality and fit for any purpose held out by the Supplier or made known to the Supplier by Ornua, expressly or by implication, and in this respect Ornua relies on the Supplier's skill and judgement; (d) be manufactured by properly trained and qualified personnel using all reasonable skill, care and diligence and in a good and workmanlike manner; (e) where they are manufactured products, be free from defects in design, materials and workmanship and remain so for the period set out in the Product Specification or, if none is specified, for at least 12 months after delivery; (f) comply with all applicable statutory and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Products; (g) comply with all relevant standards including any UK Standards, European Standards or International Standards applicable in the UK and the country or State where the Products are to be used; and (h) in the case of Products containing food stuffs, when delivered to Ornua, comply with all applicable food and hygiene legislation and regulations and best industry practice. 3.2 The Supplier shall ensure that at all times it has and maintains all licences, permissions, authorisations, consents and permits needed to carry out its obligations under the Contract in respect of the supply of Products. Breach of this Condition shall be deemed a material breach of the Contract. 3.3 Ornua may inspect and test the Products at any time before delivery. The Supplier shall remain fully responsible for the Products despite any such inspection or testing and any such inspection or testing shall not reduce or otherwise affect the Supplier's obligations under the Contract. 3.4 If following such inspection or testing Ornua considers that the Products do not comply or are unlikely to comply with the Supplier's undertakings at clause 3.1, Ornua shall inform the Supplier and the Supplier shall immediately take such remedial action as is necessary to ensure compliance. 3.5 Ornua may conduct further inspections and tests after the Supplier has carried out its remedial actions.
SOURCE CODE ESCROW FOR LICENSED PRODUCT If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this clause. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product.
Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements. 2.2. The fixation elements shall be strong and firmly secured to the LED(s) and the LED module.
