Manufacturing Rights (a) If QED fails to supply Product ordered by ViewRay in accordance with the terms of this Agreement regarding the quantity or quality of Products supplied to ViewRay, then QED shall within fifteen (15) Business Days of said failure present ViewRay with a plan to remedy the problem and shall use Commercially Reasonable Efforts to execute such plan and remedy the problem or QED shall secure an alternative source of supply within a reasonable time at no additional cost to ViewRay. Any such alternative source of supply shall be on terms substantially identical with the terms of this Agreement. If QED is unable to provide a plan to remedy the problem or secure an alternative source of supply within [***] after its initial failure to supply, then QED shall consult with ViewRay and the parties shall work together to remedy the problem. If QED is unable to remedy the supply problem after [***] (or longer as agreed in writing by the parties), commencing with the date upon which such failure to supply began, then ViewRay may at its option, and upon notice to QED, manufacture the Products itself or through a third party in accordance with the provisions of Section 3.10(b). [***] Certain information in this document has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions.
(b) If ViewRay notifies QED pursuant to Section 3.10(a), above, that ViewRay will manufacture the Products itself or through a third party, QED shall (i) deliver to ViewRay within thirty (30) days media embodying or disclosing all Program technology and Program proprietary or intellectual property rights necessary to enable ViewRay or its designee to manufacture Products conforming with the Specifications; and (ii) provide ViewRay or its designee, upon request, with reasonable assistance in establishing a back-up manufacturing line. ViewRay shall require any third party ViewRay designates to manufacture Products pursuant to this Section 3.10, to agree in writing to observe the terms of this Agreement relating to confidentiality and the manufacture of Products. Notwithstanding any provision of this Section 3.10 to the contrary, in no case shall QED be required to pay ViewRay in respect of any Products purchased by ViewRay from a third party operating a back-up manufacturing line established pursuant to this Section 3.10 or manufactured by ViewRay or its Affiliates pursuant to this Section 3.10.
Licensee’s Obligations 3.1 The Licensee shall pay the Licence Fee in advance on or before the 7th day of each English calendar month.
3.2 The Licensee shall observe, perform, conform and comply with and carry out at its own cost in so far as the Licensed Premises are concerned, terms and conditions thereof and provisions, requirements of such acts, rules, regulations, notifications and notices which may, from time to time, be or made applicable or may be issued and certified in respect of the Licensed Premises by Union of India, State of Maharashtra, Municipal Corporation of Greater Mumbai and/or any local or public authority (except such of the provisions and requirements thereof as may involve structural alteration in the Licensed Premises or any part thereof) and shall, at all times indemnify and keep always indemnified the Licensor from and against all liabilities, costs, charges and expenses in respect of non-observance, non-performance and non-compliance thereof.
3.3 The Licensee will keep the interior of the Licensed Premises and every part thereof including doors, windows, shutters, pipes, including existing false ceiling, air conditioning ducting etc., and all additions and improvements therein and thereto in good and substantial repair and condition, (subject to reasonable wear and tear) save and except any such items as have been removed with prior approval of the Licensor.
3.4 In the event, the Licensee as a corporate entity, undertakes any restructuring resulting in formation of subsidiaries of the Licensee, the Licensee may be permitted to extend the use and occupation of the Licensed Premises to such of its subsidiaries so far as the such subsidiaries are in the same line of business as the Licensee and that the permission by the Licensor to extend the use and occupation of the Licensed Premises is at the absolute discretion of the Licensor and with the Licensor's prior express written consent which consent shall not be unreasonably withheld. Provided however, the Licensee shall promptly notify the Licensor of the use of the Licensed Premises by such subsidiaries.
3.5 The Licensee shall use the Licensed Premises without in any manner disturbing and/or interfering with the activities and business of the Licensor or its associates or its subsidiary companies or any other persons authorised by the Licensor in that regard.
3.6 The Licensee shall take all steps reasonably deemed necessary for protecting the Licensed Premises
3.7 The Licensee shall take utmost care in using the Licensed Premises and shall use the Licensed Premises only for the business of the Licensee and in a lawful manner and for no other purpose.
3.8 The Licensee shall keep the Licensed Premises and every part thereof in clean and tidy condition. The Licensee shall not keep anything in or around the Licensed Premises, which shall always be kept un-littered and clean.
3.9 The Licensee or its representatives shall not in any manner prevent the Licensor or any other person authorised by the Licensor from using the common facilities and things used in common with the Licensor or any other person or occupiers authorised by the Licensor.
3.10 The Licensee shall not do any act, deed, thing and matter which would constitute a breach of any statutory requirements and which would adversely affect the Licensed Premises or any part thereof or the rights of the Licensor.
3.11 The Licensee shall at its own cost provide fire safety equipment on the Licensed Premises. In so far as the compliance with the provisions of the Maharashtra Fire Prevention and fire safety laws is concerned the Licensee shall at it own cost provide all the fire safety equipments and take all steps necessary to ensure compliance with the provisions of such laws as may be applicable in this regard.
3.12 The Licensee agrees, confirms and undertakes to bear/reimburse all costs, charges and expenses relating to stamping and registration of this Agreement and its duplicate in their entirety, and shall extend all cooperation to the Licensor in getting the said Agreement registered. However, each Party shall bear its own legal costs.
Third Party Obligations 3.1. The THIRD PARTY shall:-
3.1.1. not divulge the Confidential Information to any party other than as provided for in this Confidentiality Agreement;
3.1.2. use the Confidential Information only for the purposes necessary in providing the services for which he is engaged by the AUTHORITY; and
3.1.3. make no commercial use of the Confidential Information or any part thereof.
3.2. Notwithstanding the foregoing, the THIRD PARTY shall be entitled to make any disclosure required by law of the Confidential Information and shall notify the AUTHORITY of so doing in accordance with the provisions of paragraph 6.
Your Rights & Obligations You have represented fairly and accurately, to the best of your abilities, all details pertaining to the consigned item. In tandem with Collectable, you may elect to retain equity ownership in asset(s) consigned to Collectable’s platform.
Licensors Obligations 4.5.1. Xxxxx the Licensee the right to use the intellectual property (the Service) as in the Agreement. Ensure 24/7 availability of the Service, apart from preventive maintenance time.
4.5.2. Keep confidential any information, materials, documents which become available to the Licensee in the course of performance of this Agreement.
4.5.3. Duly publish the official messages (documents) related to the right to use the Service.
TRANSNET’S OBLIGATIONS 8.1 Transnet undertakes to promptly comply with any reasonable request by the Supplier/Service Provider for information, including information concerning Transnet's operations and activities, that relates to the Goods/Services as may be necessary for the Supplier/Service Provider to provide the Goods/Services, but for no other purpose. However, Transnet's compliance with any request for information is subject to any internal security rules and requirements and subject to the observance by the Supplier/Service Provider of its confidentiality obligations under this Agreement.
8.2 The Supplier/Service Provider shall give Transnet reasonable notice of any information it requires.
8.3 Transnet agrees to provide the Supplier/Service Provider or its Personnel such access to and use of its facilities as is necessary to allow the Supplier/Service Provider to perform its obligations under this Agreement.
Client’s Obligations 4.1 The Client shall:
(a) ensure that the terms of the Order and any other information it provides in the Order Form are complete and accurate;
(b) co-operate with the Company in all matters relating to the Services;
(c) provide the Company, its employees, agents, consultants and subcontractors, with access to the Client’s premises, office accommodation and other facilities as reasonably required by the Company to provide the Services;
(d) provide the Company with such information and materials as the Company may reasonably require in order to supply the Services, and ensure that such information is complete and accurate in all material respects;
(e) prepare the Client’s premises for the supply of the Services;
(f) obtain and maintain all necessary licences, permissions and consents which may be required for the Services before the date on which the Services are to start;
(g) comply with all applicable laws, including health and safety laws; and
(h) keep all materials, equipment, documents and other property of the Company (Company Materials) at the Client’s premises in safe custody at its own risk, maintain the Company Materials in good condition until returned to the Company, and not dispose of or use the Company Materials other than in accordance with the Company’s written instructions or authorisation; and
(i) comply with any additional obligations as set out in the Order Form.
4.2 If the Company’s performance of any of its obligations under the Contract is prevented or delayed by any act or omission by the Client or failure by the Client to perform any relevant obligation (Client Default):
(a) without limiting or affecting any other right or remedy available to it, the Company shall have the right to suspend performance of the Services until the Client remedies the Client Default, and to rely on the Client Default to relieve it from the performance of any of its obligations in each case to the extent the Client Default prevents or delays the Company’s performance of any of its obligations;
(b) the Company shall not be liable for any costs or losses sustained or incurred by the Client arising directly or indirectly from the Company’s failure or delay to perform any of its obligations as set out in this Clause 4.2; and
(c) the Client shall reimburse the Company on written demand for any costs or losses sustained or incurred by the Company arising directly or indirectly from the Client Default.
4.3 The Client shall provide any Client Requirements to the Company in a timely manner in order to enable the Company to provide the Services, including, without limitation, all materials, assets, information and/or documentation of the Client which the Client has agreed to provide or which subsequently becomes necessary to provide in order to allow the Company to provide the Services.
4.4 In the event that the Client should fail to supply the Client Requirements at the time specified or in a timely manner as set out in the above clause 4.3, the Company shall not be held responsible for any consequences of such delays, and the Clients hereby holds harmless the Company from and against all claims, liabilities, losses, costs or expenses arising out of or in connection with such delays.
Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].
Sublicense Agreements Sublicenses under this Section 2.3 shall be granted only pursuant to written agreements, which shall be subject to and consistent with the terms and conditions of this Agreement. Such Sublicense agreements shall contain, among other things, provisions to the following effect:
2.3.2.1 all provisions necessary to ensure Licensee’s ability to comply with Licensee’s obligation under or not violate the provisions of Sections 4.4, 4.5, 4.6, 5.1, 5.3, 5.4, 8.1 and 11.1;
2.3.2.2 a section substantially the same as Article 9 (Indemnification), which also shall state that the Indemnitees (as defined in Section 9.1) are intended third party beneficiaries of such Sublicense agreement for the purpose of enforcing such indemnification;
2.3.2.3 in the event of termination of the license set forth in Section 2.1.1 above (in whole or in part (e.g., termination of the license as to a Licensed Product or in a particular country)), any existing Sublicense shall terminate to the extent of such terminated license; provided, however, that, for each Sublicensee, upon termination of the license, if the Sublicensee is not then in breach of the Sublicense agreement such that Licensee would have the right to terminate such Sublicense agreement, such Sublicensee shall have the right to obtain a license from Harvard on the same terms and conditions as set forth herein, which shall not impose any representations, warranties, obligations or liabilities on Harvard that are not included in this Agreement, provided that (a) the scope of the license granted directly by Harvard to such Sublicensee shall be coextensive with the scope of the license granted by Licensee to such Sublicensee, (b) if the Sublicense granted to such Sublicensee was non-exclusive, such Sublicensee shall not have the right to participate in the prosecution or enforcement of the Patent Rights under the license granted to it directly by Harvard and (c) if there are more than one Sublicensee, each Sublicensee that is granted a direct license shall be responsible for a pro rata share of the reimbursement due under Section 6.2.3 of this Agreement (based on the number of direct licenses under the Patent Rights in effect on the date of reimbursement);
2.3.2.4 the Sublicensee shall only be entitled to sublicense its rights under such Sublicense agreement on the terms set forth in this Section 2.3; and
2.3.2.5 the Sublicensee shall not be entitled to assign the Sublicense agreement without the prior written consent of Harvard, except that Sublicensee may assign the Sublicense agreement to a successor in connection with the merger, consolidation or sale of all or substantially all of its assets or that portion of its business to which the Sublicense agreement relates; provided, however, that any permitted assignee agrees in writing in a manner reasonably satisfactory to Harvard to be bound by the terms of such Sublicense agreement.
The Supplier's Obligations The Supplier will in writing, by the time and date specified by the Contracting Body in accordance with paragraph 3.1.3(b) provide the Contracting Body with either:
3.2.1 a statement to the effect that it does not wish to tender in relation to the relevant Service Requirements; or
3.2.2 the Statement of Work and full details of its tender made in respect of the relevant Statement of Requirements. In the event that the Supplier submits a Statement of Work, it should include, as a minimum:
a) an email response subject line to comprise unique reference number and Supplier name, so as to clearly identify the Supplier;
b) a brief summary, in the email (followed by a confirmation letter), stating whether or not the Supplier is bidding for the Statement of Requirements;
c) a proposal covering the Services Requirements; and
d) confirmation of discounts applicable to the work, as referenced in Framework Agreement Schedule 3 (Charging Structure).
3.2.3 The Supplier shall ensure that any prices submitted in relation to a further competition held pursuant to this paragraph 3 shall be based on the Charging Structure and take into account any discount to which the Contracting Body may be entitled as set out in Framework Agreement Schedule 3 (Charging Structure).
3.2.4 The Supplier agrees that:
a) all tenders submitted by the Supplier in relation to a further competition held pursuant to this paragraph 3 shall remain open for acceptance by the Contracting Body for ninety (90) Working Days (or such other period specified in the invitation to tender issued by the relevant Contracting Body in accordance with the Ordering Procedure); and
b) all tenders submitted by the Supplier are made and will be made in good faith and that the Supplier has not and will not fix(ed) or adjust(ed) the amount of the offer by or in accordance with any agreement or arrangement with any other person. The Supplier certifies that it has not and undertakes that it will not:
(a) communicate to any person other than the person inviting these offers the amount or approximate amount of the offer, except where the disclosure, in confidence, of the approximate amount of the offer was necessary to obtain quotations required for the preparation of the offer; and
(b) enter into any arrangement or agreement with any other person that he or the other person(s) shall refrain from making an offer or as to the amount of any offer to be submitted.
