Metering Electricity Sample Clauses

Metering Electricity. All Electric Energy delivered by Seller to -------------------- Buyer from the Facility under this Agreement shall be metered by the Revenue Meters and the readings therefrom, including calculated transformer and transmission line losses between the Revenue Meters and the Point of Delivery, shall be made in accordance with Prudent Industry Practice consistently applied. All Replacement Power and Substitute Power delivered to Buyer from facilities inside the Interconnected Utility System, shall be metered by the Interconnected Utility. For all Replacement Power and Substitute Power from sources outside the Interconnected Utility System, the delivered amount shall be the amount scheduled as delivered to the Interconnected Utility System by the system delivering such Replacement Power or Substitute Power into the
Sample 1Sample 2
AutoNDA by SimpleDocs
Metering Electricity. If Lessor shall determine that Lessee's proposed or actual consumption of electricity is in excess of standard consumption for general office use, then Lessee, at its option, shall either (a) pay Lessor directly for such excess services or (b) enter into a contract for electrical service to the Leased Premises directly with the provider of electrical service to the Building. Lessee shall pay the entire cost and expense of installing and maintaining meters, panels, wiring and other items required to accommodate excess services to Lessee. Notwithstanding anything herein to the contrary, Lessee may, upon prior notice to Lessor, elect to enter into a contract for electrical service to the Leased Premises directly with a provider of such service. In such event, Lessor agrees to reduce the Operating Expense Stop with respect to such budgeted electrical costs as appropriate. In addition, if Lessee contracts directly with a provider of electrical service, Lessee shall (i) pay the entire cost and expense of installing and maintaining any meters, panels, wirings and other items reasonably required by Lessor to accommodate such directly contracted electrical services and (ii) not be entitled to any abatement for Service Interruption with respect to electrical service as otherwise provided in Section 5.4 unless such Service Interruption was caused by the negligence or willful intent by Lessor.
Sample 1
Metering Electricity. If Landlord shall determine that Tenant's proposed or actual consumption of electricity is in excess of standard consumption for general office use as set forth in Section 8.03(e) above, then Landlord may either charge Tenant directly for such excess services in accordance with the foregoing section, or require Tenant to enter into a contract for electrical service to the Premises directly with the provider of electrical
Sample 1
Metering Electricity. If Landlord shall determine that Tenant's proposed or actual consumption of electricity is in excess of what the standard consumption would be for general office use during Business Hours, then Landlord may either charge Tenant directly for such excess services or require Tenant to enter into a contract for electrical service to the Leased Premises directly with the provider of electrical service to the Building. Tenant shall pay the entire cost and expense of installing and maintaining meters, panels, wiring and other items required to accommodate excess services to Tenant. For avoidance of doubt and notwithstanding the foregoing, Landlord shall review the Drawings and Specifications prepared by Tenant's Architect and any equipment specifications and quantities provided by Tenant to Landlord five (5) days after Tenant furnishes same to Landlord (per the schedule in Exhibit D-2 to Exhibit D) to determine if Tenant's estimated consumption of electricity during Business Hours with respect to the quantities of equipment so disclosed to Landlord will exceed the "Electrical Design Criteria" (as specified in Exhibit D-3 to
Sample 1
Metering Electricity. All Electric Energy delivered by Seller to Buyer from the Facility under this Agreement shall be metered by the Revenue Meters and the readings therefrom, including calculated transformer and transmission line losses between the Revenue Meters and the Point of Delivery, shall be made in accordance with Prudent Industry Practice consistently applied. All Replacement Power and Substitute Power delivered to Buyer from facilities inside the Interconnected Utility System, shall be metered by the Interconnected Utility. For all Replacement Power and Substitute Power from sources outside the Interconnected Utility System, the delivered amount shall be the amount scheduled as delivered to the Interconnected Utility System by the system delivering such Replacement Power or Substitute Power into the Interconnected Utility System. The Energy Charge for which Buyer will be billed for Electric Energy also will be net of an adjustment for the value of the amount of electricity consumed by other non-operating Units at the Facility (or the Xxxxxx III Units) during the billing period ("Non-Billable Generation") to yield the "billable generation" for the billing period. To establish the value of kilowatt hours of electricity provided by the Facility and consumed by the Xxxxxx III Units for a billing period, the total for each billing period of electricity consumed by each Unit or unit will be determined from the individual Unit or unit meter readings using the Facility's Revenue Meter(s) (for the Units) and similar meters for the Xxxxxx III Units which will then be summed for (both) Units and the Xxxxxx III Units. Samples of such calculations are set forth in Appendix G.
Sample 1

Related to Metering Electricity

  • Electricity 14.01 Tenant shall obtain electricity for the Demised Premises on a direct meter basis, Tenant shall be responsible for and pay to the applicable utility all charges for electricity as measured by such meter. Landlord shall not in any way be liable or responsible to Tenant for any loss or damage or expense which Tenant may sustain or incur if either the quantity or character of electric service is changed or is no longer available or suitable for Tenant’s requirements. Any additional riser or risers to supply Tenant’s electrical requirements, upon written request to Tenant, will be installed by Landlord, at the sole cost and expense of Tenant, unless, in Landlord’s reasonable judgment, the same will cause permanent damage or injury to the Building or the Demised Premises or cause or create a dangerous or hazardous condition or interfere with or disturb other tenants or occupants. In addition to the installation of such riser or risers, Landlord will also at the sole cost and expense of Tenant, install all other equipment proper and necessary in connection therewith subject to the aforesaid terms and conditions. Tenant covenants and agrees that at all times its use of electric current shall never exceed the capacity of the feeders to the Building or the risers or wiring installation which Landlord represents is sufficient for ordinary office use. It is further covenanted and agreed by the Tenant that all the aforesaid costs and expenses are chargeable and collectible as Additional Rent and shall be paid by the Tenant to the Landlord within ten (10) days after the rendering of any xxxx or statement to the Tenant therefor. Tenant shall make no alterations or additions to the electric equipment and/or appliances without the prior written consent of Landlord in each instance, which consent shall not be unreasonably withheld, conditioned or delayed. Notwithstanding anything to the contrary herein, should electric service be interrupted for a period of more than five (5) consecutive business days through the sole fault of Landlord so as to prevent Tenant from using at least seventy-five (75%) percent of the Demised Premises, Fixed Rent shall xxxxx until such service resumes and Tenant is able to resume the use of at least seventy-five (75%) percent of the Demised Premises. Should such service interruption prevent Tenant from using at least seventy-five (75%) of the Demised Premises for more than sixty (60) days and be due to the sole fault of Landlord, Tenant shall have the right to terminate this Lease by giving written notice to Landlord no later than the seventieth (70th) consecutive day and vacating no later than the ninetieth (90th) consecutive day. TIME BEING OF THE ESSENCE for Tenant as to both dates. 14.02 Tenant agrees not to connect any additional electrical equipment of any type to the Building electric distribution system, beyond that on Tenant’s approved plans for initial occupancy, other than lamps, computers and other small office machines which consume comparable amounts of electricity, without Landlord’s prior written consent, not to be unreasonably withheld, conditioned or delayed, in each instance. In no event shall Tenant use or install any fixtures, equipment or machines the use of which in conjunction with other fixtures, equipment and machines in the Demised Premises would result in an overload of the electrical circuits servicing the Demised Premises or the Building.

  • Metering The Interconnection Customer shall be responsible for the Connecting Transmission Owner’s reasonable and necessary cost for the purchase, installation, operation, maintenance, testing, repair, and replacement of metering and data acquisition equipment specified in Attachments 2 and 3 of this Agreement. The Interconnection Customer’s metering (and data acquisition, as required) equipment shall conform to applicable industry rules and Operating Requirements.

  • Electrical Provide drawings for the following systems: .1 Lighting including circuiting and luminaire identification and switching. Also provide illuminance computer printout for all indoor typical indoor spaces and parking lots. .2 Convenience outlets and circuiting, special outlets and circuiting, television outlets, and power systems and equipment. Provide riser diagrams for all electrical systems including master clock, intercom, fire alarm, ITV, computer networking/telephone. Also, provide for emergency and normal power distribution. Provide luminaire schedule. .3 Panel schedule may be in preliminary form but circuitry must be included. .4 Applicable installation details. .5 General legend and list of abbreviations. .6 Voltage drop computation for all main feeders. .7 Short circuit analysis .8 Provide 1/2" scale floor plan and wall elevations for all electrical rooms.

  • Meters (a) You must allow safe and unhindered access to your premises for the purposes of reading and maintaining the meters (where relevant). (b) We will use our best endeavours to ensure that a meter reading is carried out as frequently as is needed to prepare your bills, consistently with the metering rules and in any event at least once every 12 months.

  • Electric If Customer has selected an Electricity Fixed Rate on the Application, Customer’s Price will be based on the Fixed Rate(s) which includes Local and State taxes, Gross Receipts Tax (GRT), PJM Adjustment (defined below) charges and adjustments and Utility applied charges and/or fees related to generation, plus the Administration Charge, which includes, Electricity Balancing Amount and third party utility and billing charges.

  • Heating The Hirer shall ensure that no unauthorised heating appliances shall be used on the premises when open to the public without the consent of the management committee. Portable Liquefied Propane Gas (LPG) heating appliances shall not be used.

  • Fuel The Vehicle must be returned with the amount of fuel equal to that at the time of the commencement of the rental. If the Vehicle is returned with less fuel, the difference will be charged to You at a rate of $5.00 per litre (which includes a service component).

  • Electrical Equipment Residents must use only CSA, UL-approved or Canadian-certified electrical equipment; the rated wattage of light fixtures must never be exceeded; and only replacement bulbs supplied by Waterloo maintenance staff may be used. Do not leave any unattended electrical equipment turned on (i.e. hair straighteners, lights etc.)

  • Gas If Customer has selected a Gas Fixed Rate, Customer’s Price will be based on the Fixed Rate(s), plus the Administration Charge, set forth in the Application, which includes RITERATE ENERGY’s compressor fuel and transportation charges, administrative and transaction costs and the Gas Balancing Amount and any Regulatory Charges (defined below).

  • Electrical Service Electrical service for new construction or a renovated existing building shall be 480/277-volt, 3-phase, 4-wire or approved equal. Service shall be sized for HVAC and other mechanical system(s) loads, lighting, general building services, and dedicated computer based office equipment loads. 5 xxxxx per square foot shall be provided for lighting and general service receptacles. Size of neutral conductor of 3- phase circuits shall be twice that of phase conductor to accommodate potential harmonic currents associated with computer system electronic power supplies and fluorescent lighting fixtures electronic ballasts.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!