Product Orders All Product orders shall be submitted by the Operators to DISTRIBUTOR and shall specify the location of the Operator’s Stores, the type of Product, and the quantity desired. Operators may place orders electronically (“Electronic Orders”) or by telephoning or faxing DISTRIBUTOR’s customer service center in accordance with the guidelines detailed below. All shipment expenses from DISTRIBUTOR’s distribution center to the Operator’s location shall be at DISTRIBUTOR’s expense unless otherwise noted elsewhere in this Agreement. Product order guides will be provided by DISTRIBUTOR to the Operators monthly via DISTRIBUTOR’s website and with a hard copy delivered to each Store, with availability of such order guides to be made prior to the beginning of the month, but only after review and approval of the order guide by COMPANY. The order guides will be organized by Product categories and will include, among other things, the Product Sell Price (as defined herein), Product units and new Products. DISTRIBUTOR will assign one product code number to each stock-keeping unit (“SKU”) of each Product, which will be common throughout its entire distribution system and will be used on all documents such as order guides, invoices, monthly reports, etc. SKU’s, and, accordingly, the assigned product code number, must differ for equivalent Products supplied by different suppliers. Only Products approved for sale to its Operators by the COMPANY will be listed on this order guide. Electronic Orders will be placed via telephone modem or internet using DISTRIBUTOR’s automated order entry system. All orders are subject to the standard order cut-off time of 4:00 p.m. two (2) days prior to their scheduled delivery day. Operators will be notified prior to the time of final order cut-off if a product is expected to be out of stock so that an alternative may be ordered, subject to the provisions of Section 3.02. Operators will have until 5:00 p.m, one (1) day before their order shipping day to modify or add-on to their order (Friday at 5:00 p.m. for Stores whose deliveries will leave DISTRIBUTOR’s facility on Monday). Where reasonably possible, DISTRIBUTOR will schedule ordering days and delivery days that are mutually agreed upon by and between DISTRIBUTOR and each Operator and will provide notice to the affected Operator of at least fourteen (14) days before routing changes. Wherever reasonably possible, DISTRIBUTOR will include no more than three (3) “skip days” between the date of order and date of delivery. For example, orders scheduled for delivery on Friday will be placed no earlier than Monday. Orders scheduled for delivery on Tuesday will be placed on Friday. In the event DISTRIBUTOR must include more than four (4) “skip days” between the date of order and date of delivery it will notify COMPANY in advance. In no event will there ever be more than four (4) “skip days” permitted without the prior written approval of COMPANY. DISTRIBUTOR may schedule deliveries on any day of the week. On an exception basis, DISTRIBUTOR will consider shortening the permissible time frames for scheduled deliveries for those Operators that, given unique and compelling business needs, require the same. Operator will be notified of any Product shortages at the time of order placement or, in the case of an Electronic Order, one (1) day prior to the loading of the delivery truck.
API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.
Mail Order Catalog Warnings In the event that, the Settling Entity prints new catalogs and sells units of the Products via mail order through such catalogs to California consumers or through its customers, the Settling Entity shall provide a warning for each unit of such Product both on the label in accordance with subsection 2.4 above, and in the catalog in a manner that clearly associates the warning with the specific Product being purchased. Any warning provided in a mail order catalog shall be in the same type size or larger than other consumer information conveyed for such Product within the catalog and shall be located on the same display page of the item. The catalog warning may use the Short-Form Warning content described in subsection 2.3(b) if the language provided on the Product label also uses the Short-Form Warning.
Manufacturer A firm that operates or maintains a factory or establishment that produces on the premises, the materials or supplies obtained by the Contractor. Regular Dealer - A firm that owns, operates, or maintains a store, warehouse, or other establishment in which the materials or supplies required for the performance of the contract are bought, kept in stock, and regularly sold to the public in the usual course of business. A regular dealer engages in, as its principal business and in its own name, the purchase and sale or lease of the products in question. A regular dealer in such bulk items as steel, cement, gravel, stone, and petroleum products need not keep such products in stock, if it owns and operates distribution equipment for the products. Brokers and packagers are not regarded as manufacturers or regular dealers within the meaning of this section. United States Department of Transportation (USDOT) - Federal agency responsible for issuing regulations (49 CFR Part 26) and official guidance for the DBE program.
PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.
Borrower Products Except as described on Schedule 5.11, no Intellectual Property owned by Borrower or Borrower Product has been or is subject to any actual or, to the knowledge of Borrower, threatened litigation, proceeding (including any proceeding in the United States Patent and Trademark Office or any corresponding foreign office or agency) or outstanding decree, order, judgment, settlement agreement or stipulation that restricts in any manner Borrower’s use, transfer or licensing thereof or that may affect the validity, use or enforceability thereof. There is no decree, order, judgment, agreement, stipulation, arbitral award or other provision entered into in connection with any litigation or proceeding that obligates Borrower to grant licenses or ownership interest in any future Intellectual Property related to the operation or conduct of the business of Borrower or Borrower Products. Borrower has not received any written notice or claim, or, to the knowledge of Borrower, oral notice or claim, challenging or questioning Borrower’s ownership in any Intellectual Property (or written notice of any claim challenging or questioning the ownership in any licensed Intellectual Property of the owner thereof) or suggesting that any third party has any claim of legal or beneficial ownership with respect thereto nor, to Borrower’s knowledge, is there a reasonable basis for any such claim. Neither Borrower’s use of its Intellectual Property nor the production and sale of Borrower Products infringes the Intellectual Property or other rights of others.
Third Party Suppliers If Licensee wishes to obtain the Compound, Product and/or Licensed Product from a Third Party source, Licensee shall notify Pfizer through MPP of the intended source prior to making any commitments to purchase the Compound, Product and/or Licensed Product. Pfizer will determine at its sole discretion whether and on what terms to grant a license to the intended source to produce the Compound, Product and/or Licensed Product or inform Licensee whether such license already exists.
Authorized Sub-processors Customer agrees that MailChimp may engage Sub-processors to process Customer Data on Customer's behalf. The Sub-processors currently engaged by MailChimp and authorized by Customer are listed in Annex A.
Samples The Contractor shall submit the following samples of Materials and relevant information to the Authority’s Engineer for pre-construction review: (a) manufacturer's test reports and standard samples of manufactured Materials; and (b) samples of such other Materials as the Authority’s Engineer may require.
Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.
