Extended Local Calling Scope Arrangement An arrangement that provides a Customer a local calling scope (Extended Area Service, “EAS”), outside of the Customer’s basic exchange serving area.
Minimum Customer Support Requirements for TIPS Sales Vendor shall provide timely and commercially reasonable support for TIPS Sales or as agreed to in the applicable Supplemental Agreement.
ADDITIONAL SPECIAL CONTRACT CONDITIONS Special Contract Conditions revisions: the corresponding subsections of the Special Contract Conditions referenced below are replaced in their entirety with the following:
Agreement to Repay Letter of Credit Drawings (a) The Borrower agrees to reimburse each Issuing Lender, by making payment to the Administrative Agent in immediately available funds at the Payment Office, for any payment or disbursement made by such Issuing Lender under any Letter of Credit issued by it (each such amount, so paid until reimbursed by the Borrower, an “Unpaid Drawing”), not later than one Business Day following receipt by the Borrower of notice of such payment or disbursement (provided that no such notice shall be required to be given if a Default or an Event of Default under Section 11.05 shall have occurred and be continuing, in which case the Unpaid Drawing shall be due and payable immediately without presentment, demand, protest or notice of any kind (all of which are hereby waived by the Borrower)), with interest on the amount so paid or disbursed by such Issuing Lender, to the extent not reimbursed prior to 12:00 Noon (New York time) on the date of such payment or disbursement, from and including the date paid or disbursed to but excluding the date such Issuing Lender was reimbursed by the Borrower therefor at a rate per annum equal to the Base Rate as in effect from time to time plus the Applicable Margin as in effect from time to time for Revolving Loans that are maintained as Base Rate Loans; provided, however, to the extent such amounts are not reimbursed prior to 12:00 Noon (New York time) on the third Business Day following the receipt by the Borrower of notice of such payment or disbursement or following the occurrence of a Default or an Event of Default under Section 11.05, interest shall thereafter accrue on the amounts so paid or disbursed by such Issuing Lender (and until reimbursed by the Borrower) at a rate per annum equal to the Base Rate as in effect from time to time plus the Applicable Margin for Revolving Loans that are maintained as Base Rate Loans as in effect from time to time plus 2%, with such interest to be payable on demand. Each Issuing Lender shall give the Borrower prompt written notice of each Drawing under any Letter of Credit issued by it, provided that the failure to give any such notice shall in no way affect, impair or diminish the Borrower’s obligations hereunder.
(b) The obligations of the Borrower under this Section 3.05 to reimburse each Issuing Lender with respect to drafts, demands and other presentations for payment under Letters of Credit issued by it (each, a “Drawing”) (including, in each case, interest thereon) shall be absolute and unconditional under any and all circumstances and irrespective of any setoff, counterclaim or defense to payment which the Borrower or any Subsidiary of the Borrower may have or have had against any Lender (including in its capacity as an Issuing Lender or as a Participant), including, without limitation, any defense based upon the failure of any drawing under a Letter of Credit to conform to the terms of the Letter of Credit or any nonapplication or misapplication by the beneficiary of the proceeds of such Drawing; provided, however, that the Borrower shall not be obligated to reimburse any Issuing Lender for any wrongful payment made by such Issuing Lender under a Letter of Credit issued by it as a result of acts or omissions constituting willful misconduct or gross negligence on the part of such Issuing Lender (as determined by a court of competent jurisdiction in a final and non-appealable decision).
Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification.
2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length.
2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A.
2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned.
2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.
Terms of Repayment 1. If I do not meet the criteria for loan forgiveness, I shall repay this loan, including accrued interest, to the State of Wisconsin.
a. The interest rate will be 5% annually and interest will begin to accrue upon the initial date of repayment.
b. I shall have ten years from the initial date of repayment to repay my loan in full. The start of the repayment period will be determined by HEAB, but will begin no sooner than six months after I graduate or leave my current program of study. If I do not repay my loan in full by the end of the ten-year repayment period, I shall be required to make a balloon payment and pay the remaining balance in full.
c. I shall make minimum monthly payments due by the 1st of each month. The minimum monthly payment amount will be the amount required to pay the total amount loaned in full in 120 months (ten years) at an annual interest rate of 5%.
d. I may request, with appropriate supporting documentation, a deferment of my loan payments. Interest will not accrue during times of HEAB-approved deferments. HEAB may grant deferments for: a) full-time enrollment at an accredited institution, b) up to three years of military service, Peace Corps, or VISTA, and c) up to six months for temporary unemployment or pregnancy/childbirth/legal adoption of a child.
Application to Term Loans With respect to each prepayment of Term Loans required by Section 5.2(a), the Borrower may, if applicable, designate the Types of Loans that are to be prepaid and the specific Borrowing(s) pursuant to which made; provided, that if any Lender has provided a Rejection Notice in compliance with Section 5.2(f), such prepayment shall be applied with respect to the Term Loans to be prepaid on a pro rata basis across all outstanding Types of such Term Loans in proportion to the percentage of such outstanding Term Loans to be prepaid represented by each such Class. In the absence of a Rejection Notice or a designation by the Borrower as described in the preceding sentence, the Administrative Agent shall, subject to the above, make such designation in its reasonable discretion with a view, but no obligation, to minimize breakage costs owing under Section 2.11.
Facility Use The Employer shall allow individuals the use of gender- segregated facilities, such as restrooms, locker rooms, and dressing rooms that are consistent with that individual's gender expression or gender identity. In such facilities where undressing in the presence of others occurs, the Employer shall allow access to and use of a facility consistent with that individual's gender expression or gender identity.
Please see the current Washtenaw Community College catalog for up-to-date program requirements Conditions & Requirements
Issuance of and Drawings and Reimbursement Under Letters of Credit (a) Request for Issuance. Each Letter of Credit shall be issued upon notice, given not later than 2:00 P.M. (New York, New York time) on the fifth Business Day prior to the date of the proposed issuance of such Letter of Credit (or such later day as the Issuing Bank in its sole discretion shall agree), by the Borrower to the Issuing Bank, which shall give to the Administrative Agent and each Revolving Credit Lender prompt notice thereof. Each notice of issuance of a Letter of Credit (a "Notice of Issuance") shall be by telephone, confirmed immediately in writing, or by telecopier, shall be duly executed by a Responsible Officer of the Borrower, and shall specify therein: (i) the requested date of such issuance (which shall be a Business Day); (ii) the requested Available Amount of such Letter of Credit; (iii) the requested expiration date of such Letter of Credit (which shall comply with the requirements of Section 2.01(e)); (iv) the name and address of the proposed beneficiary of such Letter of Credit; and (v) the proposed form of such Letter of Credit, and shall be accompanied by such application and agreement for letters of credit as the Issuing Bank may specify to the Borrower for use in connection with such requested Letter of Credit (such applications and agreements, and all similar agreements entered into in connection with an Existing Letter of Credit, a "Letter of Credit Agreement"). If the requested form of such Letter of Credit is acceptable to the Issuing Bank in its sole discretion, the Issuing Bank will, upon fulfillment of the applicable conditions set forth in Article III, make such Letter of Credit available to the Borrower at its office referred to in Section 8.02 or as otherwise agreed with the Borrower in connection with the issuance of such Letter of Credit. If and to the extent that the provisions of any Letter of Credit Agreement shall conflict with this Agreement, the provisions of this Agreement shall govern.
