Minimum dimensions. 5.6.3.1. The several kinds of exits shall have the following minimum dimensions: (see also Annex 3, figure 17): 7.1.1. The height at the upper corners may be reduced with round-offs, with a radius of not more than 15 cm. For vehicles of class B where the service door aperture height lies between 140 and 150 cm a minimum single door aperture width of 75 cm shall apply. For all the vehicles the width of any service door may be reduced by 10 cm when the measurement is made at the level of the hand-holds and by 25 cm in cases where intruding wheel arches or the actuating mechanism for automatic or remote-control doors or the rake of the windscreen so require. Width: Single door: 65 cm Double door: 120 cm Emergency door Height: 125 cm Width: 55 cm The width may be reduced to 30 cm in cases where intruding wheel arches so require, providing that the width of 55 cm is respected at the minimum height of 40 cm above the lowest part of the door aperture. The height at the upper corners may be reduced with round-offs, with a radius of not more than 15 cm. Emergency window Aperture area: 4,000 cm2 It shall be possible to inscribe in this area a rectangle 50 cm high and 70 cm wide. A 5 per cent tolerance shall, however, be permitted in respect of this area for type approvals issued for one year following the entry into force of this Regulation. Emergency window situated in the rear face of the vehicle if the manufacturer does not provide an emergency window of the minimum dimensions prescribed above It shall be possible to inscribe in the emergency window aperture a rectangle 35 cm high and 155 cm wide. The corners of the rectangle may be rounded to a radius of curvature not exceeding 25 cm. Escape hatch Aperture area: 4,000 cm2 It shall be possible to inscribe in this area a rectangle measuring 50 x 70 cm. 5.6.3.2. A vehicle to which paragraph 5.
Appears in 2 contracts
Samples: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles
Minimum dimensions. 5.6.3.1. The several kinds of exits shall have the following minimum dimensions: (see also Annex annex 3, figure 17):): Aperture Dimensions Remarks Service door Entry height: Class A 165 cm Class B 150 cm The service door entry height shall be measured as the vertical distance, measured on a vertical plane of the horizontal projections of the mid point of the door aperture and the top surface of the lowest step.
7.1.1. The height at the upper corners may be reduced with round-offs, with a radius of not more than 15 cm. Width: Single door: 65 cm Double door: 120 cm For vehicles of class B where the service door aperture height lies between 140 and 150 cm a minimum single door aperture width of 75 cm shall apply. For all the vehicles the width of any service door may be reduced by 10 cm when the measurement is made at the level of the hand-holds and by 25 cm in cases where intruding wheel arches or the actuating mechanism for automatic or remote-control doors or the rake of the windscreen so require. Width: Single door: 65 cm Double door: 120 cm Emergency door Height: 125 cm Width: 55 cm The width may be reduced to 30 cm in cases where intruding wheel arches so require, providing that the width of 55 cm is respected at the minimum height of 40 cm above the lowest part of the door aperture. The height at the upper corners may be reduced with round-offs, with a radius of not more than 15 cm. Emergency window Aperture area: 4,000 cm2 It shall be possible to inscribe in this area a rectangle 50 cm high and 70 cm wide. A 5 per cent tolerance shall, however, be permitted in respect of this area for type approvals issued for one year following the entry into force of this Regulation. Emergency window situated in the rear face of the vehicle if the manufacturer does not provide an emergency window of the minimum dimensions prescribed above It shall be possible to inscribe in the emergency window aperture a rectangle 35 cm high and 155 cm wide. The corners of the rectangle may be rounded to a radius of curvature not exceeding 25 cm. Escape hatch Aperture area: 4,000 cm2 It shall be possible to inscribe in this area a rectangle measuring 50 x 70 cm.
5.6.3.2. A vehicle to which paragraph 5.
Appears in 2 contracts
Samples: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles