Minimum Wage The Contractor and the Surety, in consideration of the award of this Contract to the said Contractor, jointly and severally for themselves, their heirs, executors, administrators, and successors or assigns hereby agree to pay all employees in and about the construction or performance of the work under this Contract in accordance with the schedule of wages contained in the Instructions to Bidders for work in any trade or occupation listed therein. The Contractor shall make wage reports as required by said Instructions. Strict compliance with said minimum wage requirements is demanded by the Owner and shall be considered as of the essence of this Contract. It is hereby agreed that the City of Milwaukee by its Milwaukee Board of School Directors shall have the right at all times to examine all persons employed upon the project by the Contractor and carryon and make such investigations as it may deem necessary to see that the terms of this agreement, relating to such wage payments, are being fully observed.
Minimum wages a. All laborers and mechanics employed or working upon the site of the work, will be paid unconditionally and not less often than once a week, and without subsequent deduction or rebate on any account (except such payroll deductions as are permitted by regulations issued by the Secretary of Labor under the Xxxxxxxx Act (29 CFR part 3)), the full amount of wages and bona fide fringe benefits (or cash equivalents thereof) due at time of payment computed at rates not less than those contained in the wage determination of the Secretary of Labor which is attached hereto and made a part hereof, regardless of any contractual relationship which may be alleged to exist between the contractor and such laborers and mechanics. Contributions made or costs reasonably anticipated for bona fide fringe benefits under section 1(b)(2) of the Xxxxx-Xxxxx Act on behalf of laborers or mechanics are considered wages paid to such laborers or mechanics, subject to the provisions of paragraph 1.d. of this section; also, regular contributions made or costs incurred for more than a weekly period (but not less often than quarterly) under plans, funds, or programs which cover the particular weekly period, are deemed to be constructively made or incurred during such weekly period. Such laborers and mechanics shall be paid the appropriate wage rate and fringe benefits on the wage determination for the classification of work actually performed, without regard to skill, except as provided in 29 CFR 5.5(a)(4). Laborers or mechanics performing work in more than one classification may be compensated at the rate specified for each classification for the time actually worked therein: Provided, That the employer's payroll records accurately set forth the time spent in each classification in which work is performed. The wage determination (including any additional classification and wage rates conformed under paragraph 1.b. of this section) and the Xxxxx-Xxxxx poster (WH–1321) shall be posted at all times by the contractor and its subcontractors at the site of the work in a prominent and accessible place where it can be easily seen by the workers.
(1) The contracting officer shall require that any class of laborers or mechanics, including helpers, which is not listed in the wage determination and which is to be employed under the contract shall be classified in conformance with the wage determination. The contracting officer shall approve an additional classification and wage rate and fringe benefits therefore only when the following criteria have been met:
(i) The work to be performed by the classification requested is not performed by a classification in the wage determination; and
(ii) The classification is utilized in the area by the construction industry; and
(iii) The proposed wage rate, including any bona fide fringe benefits, bears a reasonable relationship to the wage rates contained in the wage determination.
(2) If the contractor and the laborers and mechanics to be employed in the classification (if known), or their representatives, and the contracting officer agree on the classification and wage rate (including the amount designated for fringe benefits where appropriate), a report of the action taken shall be sent by the contracting officer to the Administrator of the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, Washington, DC 20210. The Administrator, or an authorized representative, will approve, modify, or disapprove every additional classification action within 30 days of receipt and so advise the contracting officer or will notify the contracting officer within the 30-day period that additional time is necessary.
(3) In the event the contractor, the laborers or mechanics to be employed in the classification or their representatives, and the contracting officer do not agree on the proposed classification and wage rate (including the amount designated for fringe benefits, where appropriate), the contracting officer shall refer the questions, including the views of all interested parties and the recommendation of the contracting officer, to the Wage and Hour Administrator for determination. The Wage and Hour Administrator, or an authorized representative, will issue a determination within 30 days of receipt and so advise the contracting officer or will notify the contracting officer within the 30-day period that additional time is necessary.
(4) The wage rate (including fringe benefits where appropriate) determined pursuant to paragraphs 1.b.(2) or 1.b.
MINIMUM WAGE LAWS 35 A. Pursuant to the United States of America Fair Labor Standards Act of 1938, as amended, and 36 State of California Labor Code, §1178.5, CONTRACTOR shall pay no less than the greater of the 37 federal or California Minimum Wage to all its employees that directly or indirectly provide services 1 pursuant to this Agreement, in any manner whatsoever. CONTRACTOR shall require and verify that 2 all its contractors or other persons providing services pursuant to this Agreement on behalf of 3 CONTRACTOR also pay their employees no less than the greater of the federal or California Minimum 4 Wage.
Xxxxxxx Xxxxxxx/Market Abuse Laws You acknowledge that, depending on your country or broker’s country, or the country in which Common Stock is listed, you may be subject to xxxxxxx xxxxxxx restrictions and/or market abuse laws in applicable jurisdictions, which may affect your ability to accept, acquire, sell or attempt to sell, or otherwise dispose of the shares of Common Stock, rights to shares of Common Stock (e.g., RSUs) or rights linked to the value of Common Stock, during such times as you are considered to have “inside information” regarding the Company (as defined by the laws or regulations in applicable jurisdictions, including the United States and your country). Local xxxxxxx xxxxxxx laws and regulations may prohibit the cancellation or amendment of orders you placed before possessing inside information. Furthermore, you may be prohibited from (i) disclosing insider information to any third party, including fellow employees and (ii) “tipping” third parties or causing them to otherwise buy or sell securities. Any restrictions under these laws or regulations are separate from and in addition to any restrictions that may be imposed under any applicable Company xxxxxxx xxxxxxx policy. You acknowledge that it is your responsibility to comply with any applicable restrictions, and you should speak to your personal advisor on this matter.
Xxxxx-Xxxxx Act Xxxxx-Xxxxx Act, as amended (40 U.S.C. 3141-3148). When required by Federal program legislation, all prime construction contracts in excess of $2,000 awarded by non- Federal entities must include a provision for compliance with the Xxxxx-Xxxxx Act (40 U.S.C. 3141- 3144, and 3146-3148) as supplemented by Department of Labor regulations (29 CFR Part 5, “Labor Standards Provisions Applicable to Contracts Covering Federally Financed and Assisted Construction”). In accordance with the statute, contractors must be required to pay wages to laborers and mechanics at a rate not less than the prevailing wages specified in a wage determination made by the Secretary of Labor. In addition, contractors must be required to pay wages not less than once a week. The non-Federal entity must place a copy of the current prevailing wage determination issued by the Department of Labor in each solicitation. The decision to award a contract or subcontract must be conditioned upon the acceptance of the wage determination. The non-Federal entity must report all suspected or reported violations to the Federal awarding agency. The contracts must also include a provision for compliance with the Xxxxxxxx “Anti-Kickback” Act (40 U.S.C. 3145), as supplemented by Department of Labor regulations (29 CFR Part 3, “Contractors and Subcontractors on Public Building or Public Work Financed in Whole or in Part by Loans or Grants from the United States”). The Act provides that each contractor or Subrecipient must be prohibited from inducing, by any means, any person employed in the construction, completion, or repair of public work, to give up any part of the compensation to which he or she is otherwise entitled. The non-Federal entity must report all suspected or reported violations to the Federal awarding agency.
CONTRACT WORK HOURS AND SAFETY STANDARDS As per the Contract Work Hours and Safety Standards Act (40 U.S.C. 3701-3708), where applicable, all Customer Purchase Orders in excess of ,000 that involve the employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. 3702 and 3704, as supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 U.S.C. 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence.
Sxxxxxxx-Xxxxx Act There is and has been no failure on the part of the Company or any of the Company’s directors or officers, in their capacities as such, to comply with any provision of the Sxxxxxxx-Xxxxx Act of 2002 and the rules and regulations promulgated in connection therewith (the “Sxxxxxxx-Xxxxx Act”), including Section 402 related to loans and Sections 302 and 906 related to certifications.
Xxxx-Xxxxx-Xxxxxx Act The waiting period (and any extension thereof) applicable to the consummation of the transactions contemplated hereby under the HSR Act shall have expired or been terminated.
Sxxxxxxx-Xxxxx Compliance As soon as it is legally required to do so, the Company shall take all actions necessary to obtain and thereafter maintain material compliance with each applicable provision of the Sxxxxxxx-Xxxxx Act of 2002 and the rules and regulations promulgated thereunder and related or similar rules and regulations promulgated by any other governmental or self-regulatory entity or agency with jurisdiction over the Company.
Xxxxx Xxxx Purchase Order and Sales Contact Email 2 Purchase Order and Sales Contact Phone 2 3 Company Website 2 4 Entity D/B/A's and Assumed Names 5 Primary Address 2 6 Primary Address City 7 Primary Address State 2 8 Primary Address Zip 9 Search Words Identifying Vendor Certification of Vendor Residency (Required by the State of Texas)
