Modification and extension of approval Sample Clauses

Modification and extension of approval of the vehicle type 7.1. Every modification of the vehicle type with regard to this Regulation shall be notified to the Type Approval Authority which approved that vehicle type. The Type Approval Authority may then either: (a) Decide, in consultation with the manufacturer, that a new type approval is to be granted; or (b) Apply the procedure contained in paragraph 7.1.1. (Revision) and, if applicable, the procedure contained in paragraph 7.1.2. (Extension). 7.1.1. Revision When the details recorded in the information documents have changed and the Type Approval Authority considers that the modifications made are unlikely to have appreciable adverse effect, and that in any case the vehicle still meets the requirements, the modification shall be designated a "revision". In such a case, the Type Approval Authority shall issue the revised pages of the information documents as necessary, marking each revised page to show clearly the nature of the modification and the date of re-issue. A consolidated, updated version of the information documents accompanied by a detailed description of the modification, shall be deemed to meet this requirement.
Sample 1Sample 2
AutoNDA by SimpleDocs
Modification and extension of approval. OF A VEHICLE OR BODYWORK TYPE 6.1. Every modification of the vehicle or bodywork type shall be notified to the Administrative Department which approved the vehicle type. That department may then either: 6.1.1. consider that the modifications made are unlikely to have an appreciable adverse effect and that, in any case, the vehicle or bodywork still complies with the requirements; or 6.1.2. require a further test report from the Technical Service responsible for conducting the tests. 6.2. Confirmation or refusal of approval, specifying the modifications, shall be communicated by the procedure specified in paragraph 4.3. to the Contracting Parties to the Agreement which apply this Regulation. 6.3. The Competent Authority issuing the extension of approval shall assign a series number for such an extension and inform thereof the other Contracting Parties to the 1958 Agreement applying this Regulation by means of a communication form conforming to the model in Annex 1, Appendix 2 to this Regulation.
Sample 1Sample 2
Modification and extension of approval. OF A TYPE OF HEAD RESTRAINT 10.1. Every modification of the type of head restraint shall be notified to the administrative department which approved the type of head restraint. The department may then either: 10.1.1. Consider that the modifications made are unlikely to have an appreciable adverse effect and that in any case the head restraint still complies with the requirements; or 10.1.2. Require a further test report from the technical service responsible for conducting the tests. Regulation No. 25 10.2. Confirmation or refusal of approval, specifying the alterations shall be communicated by the procedure specified in paragraph/5.3 above to the Parties to the Agreement applying this Regulation. 10.3. The competent authority issuing the extension of approval shall assign a series number for such an extension and inform thereof the other Parties to the 1958 Agreement applying this Regulation by means of a communication form conforming to the model in annex/1 to this Regulation.
Sample 1
Modification and extension of approval of the approved type 11.1. Every modification of the approved type shall be notified to the Type Approval Authority which approved the type. The Type Approval Authority may then either: 11.1.1. Consider that the modifications made are unlikely to have an appreciable adverse effect and that in any case the modified type still complies with the requirement; or 11.1.2. Require a further test report from the Technical Service conducting the tests. 11.2. Confirmation or refusal of approval, specifying the alterations, shall be communicated by the procedure specified in paragraph 4.5. to the Contracting Parties to the Agreement applying this Regulation. 11.3. The Type Approval Authority issuing the extension of approval shall assign a series number for such an extension and inform thereof the other Parties to the 1958 Agreement applying this Regulation by means of a communication form conforming to the model of Annexes 2A or 2B to this Regulation.
Sample 1
Modification and extension of approval of the vehicle type or of the installation of its lighting and light-signalling devices 7.1. Every modification of the vehicle type, or of the installation of its lighting or light-signalling devices, or of the list referred to in paragraph 3.2.2. above, shall be communicated to the Type Approval Authority which approved that vehicle type. The Authority may then either: 7.1.1. Consider that the modifications made are unlikely to have an appreciable adverse effect and that in any case the vehicle still meets the requirements; or 7.1.2. Require a further test report from the Technical Service responsible for conducting the tests. 7.2. Confirmation or refusal of approval, specifying the alterations, shall be communicated by the procedure specified in paragraph 4.3. above to the Parties to the Agreement applying this Regulation. 7.3. The Type Approval Authority issuing the extension of approval shall assign a series number for such an extension and inform thereof the other Parties to the 1958 Agreement applying this Regulation by means of a communication form conforming to the model in Annex 1 to this Regulation.
Sample 1
Modification and extension of approval of a vehicle type or a type of exhaust or silencing system(s) 7.1. Every modification of the vehicle type or of the exhaust or silencing system shall be notified to the Type Approval Authority which approved the vehicle type. The said Authority may then either: 7.1.1. Consider that the modifications made are unlikely to have an appreciable adverse effect; or 7.1.2. Require a further test report from the Technical Service responsible for conducting the tests. 7.2. Confirmation or refusal of approval, specifying the alterations, shall be communicated to the Parties to the Agreement applying this Regulation in accordance with the procedure specified in paragraph 5.3. above. 7.3. The Type Approval Authority issuing the extension of approval shall assign a series number for such an extension and inform thereof the other Contracting Parties to the 1958 Agreement applying this Regulation by means of a communication form conforming to the model given in Annex 1 to this Regulation.
Sample 1
Modification and extension of approval of the vehicle type or of the installation of its lighting and light-signalling devices 7.1. Every modification of the vehicle type, or of the installation of its lighting or light-signalling devices, or of the list referred to in paragraph 3.2.2. above, shall be communicated to the Type Approval Authority which approved that vehicle type. The Authority may then either: 7.1.1. Consider that the modifications made are unlikely to have an appreciable adverse effect and that in any case the vehicle still meets the requirements; or 7.1.2. Require a further test report from the Technical Service responsible for conducting the tests. 7.2. Confirmation or refusal of approval, specifying the alterations, shall be communicated by the procedure specified in paragraph 4.3. above to the Parties to the Agreement applying this Regulation.
Sample 1
AutoNDA by SimpleDocs

Related to Modification and extension of approval

  • Modification, Extension and Renewal of Options The Board or a duly appointed committee thereof, may modify, extend or renew this Option or accept the surrender thereof (to the extent not theretofore exercised) and authorize the granting of a new option in substitution therefore (to the extent not theretofore exercised), subject at all times to the Code and applicable securities laws. Notwithstanding the foregoing provisions of this Section 12, no modification shall, without the consent of the Recipient, alter to the Recipient’s detriment or impair any rights of Recipient hereunder.

  • Modification and Waivers The Indenture permits, with certain exceptions as therein provided (including, but not limited to the exceptions set forth in Section 15.11(i)), the amendment of the Indenture and the modification of the rights and obligations of the Issuer and the rights of the holders of the Notes under the Indenture at any time by the Issuer with the consent of the holders of not less than 66 2/3% in aggregate principal amount of the series of Notes of which this Note is a part then outstanding and all other Securities (as defined in the Indenture) then outstanding under the Indenture and affected by such amendment and modification. The Indenture also contains provisions permitting the holders of a majority in aggregate principal amount of the series of Notes of which this Note is a part then outstanding and all other Securities then outstanding under the Indenture and affected thereby, on behalf of the holders of all such Securities, to waive compliance by the Issuer with certain provisions of the Indenture and certain past defaults under the Indenture and their consequences. Any such consent or waiver by the holder of this Note shall be conclusive and binding upon such holder and upon all future holders of this Note and of any Note issued upon the registration of transfer hereof or in exchange herefor or in lieu hereof whether or not notation of such consent or waiver is made upon this Note. The determination of whether particular Securities are “outstanding” will be made in accordance with the Indenture. Any action by the holder of this Note shall bind all future holders of this Note, and of any Note issued in exchange or substitution hereof or in place hereof, in respect of anything done or permitted by the Issuer or by the Trustee in pursuance of such action. New Notes authenticated and delivered after the execution of any agreement modifying, amending or supplementing this Note may bear a notation in a form approved by the Issuer as to any matter provided for in such modification, amendment or supplement to the Indenture or the Notes. New Notes so modified as to conform, in the opinion of the Issuer, to any provisions contained in any such modification, amendment or supplement may be prepared by the Issuer, authenticated by the Trustee and delivered in exchange for this Note.

  • Modification and Waiver No supplement, modification or amendment of this Agreement shall be binding unless executed in writing by the parties hereto. No waiver of any of the provisions of this Agreement shall be deemed or shall constitute a waiver of any other provisions of this Agreement nor shall any waiver constitute a continuing waiver.

  • Extension of Agreement Prior to the original expiration date of this Agreement, the Parties mutually agree to extend this Agreement to the February 15 extension date identified in Paragraph VIII(A). The Parties acknowledge that no further extensions of this Agreement are authorized.

  • Amendment, Extension and Waiver Subject to applicable law, at any time prior to the consummation of the transactions contemplated by this Agreement, the parties may (a) amend this Agreement, (b) extend the time for the performance of any of the obligations or other acts of either party hereto, (c) waive any inaccuracies in the representations and warranties contained herein or in any document delivered pursuant hereto, or (d) waive compliance with any of the agreements or conditions contained in Articles V and VI hereof or otherwise; provided, however, that after any approval of the transactions contemplated by this Agreement by Innes Street's shareholders, there may not be, without further approval of such shareholders, any amendment of this Agreement which reduces the amount or changes the form of the consideration to be delivered to Innes Street shareholders hereunder other than as contemplated by this Agreement. This Agreement may not be amended except by an instrument in writing authorized by the respective Boards of Directors and signed, by duly authorized officers, on behalf of the parties hereto. Any agreement on the part of a party hereto to any extension or waiver shall be valid only if set forth in an instrument in writing signed by a duly authorized officer on behalf of such party, but such waiver or failure to insist on strict compliance with such obligation, covenant, agreement or condition shall not operate as a waiver of, or estoppel with respect to, any subsequent or other failure.

  • Modification, Extension The issuance of any supplement, modification, amendment, renewal, or extension to any Letter of Credit shall, for purposes hereof, be treated in all respects the same as the issuance of a new Letter of Credit hereunder.

  • Modification of Agreement This Agreement may be modified, amended, suspended or terminated, and any terms or conditions may be waived, but only by a written instrument executed by the parties hereto.

  • Modifications, Amendments and Waivers This Agreement may not be modified or amended, or any provision thereof waived, except in a writing signed by all the parties to this Agreement.

  • Amendments, Modifications and Waivers No amendment, modification or waiver in respect of this Agreement shall be effective against any party unless it shall be in writing and signed by Parent, the Company and Stockholder.

  • Modification and Amendment This Agreement may not be changed, modified, discharged or amended, except by an instrument signed by all of the parties hereto.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!