Common use of Optical Connectors Clause in Contracts

Optical Connectors. The CFP2 module shall support LC, MTP12 and MTP24 optical connector types, as listed in Table 5-3. The optical connectors are positioned in the CFP2 module as illustrated in Figure 5-10. The optical connector is centered in position along the X-axis (module width) with an offset tolerance of ±0.5mm. The position of the optical connector in the Y and Z axes shall be specified by the CFP2 module manufacturer. Table 5-3: Optical Connectors8 Pin # Category Reference Number LC Connector TBA TBA MPO12 Connector TBA TBA MPO24 Connector TBA TBA 8 Other optical connectors may be supported Figure 5-10: CFP2 Optical Connector Position Offset 2mm Transmitter Receiver Module center Connector center

Optical Connectors. The CFP2 CFP8 module shall support LC, MTP12 and MTP24 MTP16 optical connector types, as listed in Table 5-3. The optical connectors are positioned in the CFP2 CFP8 module as illustrated in Figure 5-10. The optical connector is centered in position along the X-axis (module width) with an offset tolerance of ±0.5mm. The position of the optical connector in the Y and Z axes shall be specified by the CFP2 module manufacturer. Table 5-3: Optical Connectors8 Connectors5 Pin # Category Reference Number LC Connector TBA TBA MPO12 Connector TBA TBA MPO24 MPO16 Connector TBA TBA 8 MPO32 Connector TBA TBA 5 Other optical connectors may be supported Figure 5-10: CFP2 CFP8 Optical Connector Position Offset 2mm Transmitter Receiver Module center Connector centerPosition

Optical Connectors. The CFP2 module shall support LC, MTP12 and MTP24 optical connector types, as listed in Table 5-3. The optical connectors are positioned in the CFP2 module as illustrated in Figure 5-10. The optical connector is centered in position along the X-axis (module width) with an offset tolerance of ±0.5mm. The position of the optical connector in the Y and Z axes shall be specified by the CFP2 module manufacturer. Table 5-35‐3: Optical Connectors8 Pin # Category Reference Number LC Connector TBA TBA MPO12 Connector TBA TBA MPO24 Connector TBA TBA 8 Other optical connectors may be supported Figure 5-105‐10: CFP2 Optical Connector Position Offset ± 2mm Transmitter Receiver Module center Connector center