Common use of Other Additional Services Clause in Contracts

Other Additional Services. 4.3.1 Making revisions in Drawings, Specifications or other documents but only if such revisions are: 4.3.1.1 inconsistent with approvals or instructions previously given by Owner; or 4.3.1.2 required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of preparation of such documents. 4.3.2 Providing services required because of significant changes in the Project including, but not limited to, scope, size, quality, complexity, Owner's schedule, except for services required under the Article entitled “Scope of Architect/Engineer’s Basic Services”. 4.3.3 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders or Construction Change Directives which require design or redesign, and which are not required to correct the Construction Documents, or which are not due to oversights of Architect/Engineer. 4.3.4 Providing consultation concerning replacement of Work damaged by fire or other cause, not a result of the Architect/Engineer, its consultants or other representatives’ actions, during construction, and furnishing services required in connection with the replacement of such Work. 4.3.5 Providing services made necessary by the default of Construction Manager, by major defects or deficiencies in the Work of Construction Manager, or by failure of performance of either Owner or Construction Manager under the Contract for Construction. 4.3.6 When required by Owner, preparing documents for alternate, separate, sequential bids, or phased construction. 4.3.7 Programming the requirements of the Project, if not included in the original Project scope. 4.3.8 Providing planning surveys, Site evaluations or comparative studies of prospective sites. 4.3.9 Providing special surveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 4.3.10 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Project scope. 4.3.11 Making measured drawings of existing construction when required for planning additions or alterations thereto. 4.3.12 Providing coordination of construction performed by separate contractors or by Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by Owner. 4.3.13 Providing detailed estimates of Construction Cost beyond that already required in Basic Services. 4.3.14 Providing interior design and other similar services required for or in connection with the selection, procurement or installation of furniture, furnishings and related equipment. 4.3.15 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 4.3.16 Preparing and submitting a set of reproducible as-built record drawings on BIM or AutoCAD electronic files, showing significant changes in the Work made during construction based on marked-up prints, drawings and other data furnished by Construction Manager to Architect/Engineer. Architect/Engineer will submit one set of reproducible as-built record drawings along with the as-built record drawings on archival quality disks (CD’s). 4.3.17 Providing services after issuance by Owner of the final payment to Construction Manager, except for the post occupancy inspection as described in the FIU Professional Services Guide, which is part of Architect/Engineer’s Basic Services. 4.3.18 When requested by Architect/Engineer in writing and approved by Owner in writing providing services of consultants for other than architectural, structural, civil, mechanical and electrical engineering portions of the Project or other than any special consultants included as a part of the Project team on Architect/Engineer's Professional Qualification Supplement, which are included as a part of Basic Services. 4.3.19 Providing site surveys, geotechnical testing services or other special tests, if required. 4.3.20 Providing special inspection on threshold buildings as defined in Chapter 553, Florida Statutes. All threshold reports shall be signed and sealed by the architect or engineer of record. 4.3.21 Providing prolonged contract administration and construction observation should the construction time specified for Substantial Completion be exceeded by more than sixty (60) days due to no fault of Architect/Engineer. In no case shall the initial sixty (60) day period be considered for additional compensation beyond Basic Services. 4.3.22 Providing any other services not otherwise included in this Agreement and which have been pre-approved by Owner in writing. For clarification purposes, Architect/Engineer acknowledges and agrees that if any of the activities in this Article are included in the FIU Professional Services Guide, any such activity is part of Architect/Engineer’s Basic Services and not considered an Additional Service under this Agreement.

Other Additional Services. 4.3.1 Making revisions in Drawings, Specifications or other documents but only if such revisions are: 4.3.1.1 inconsistent with approvals or instructions previously given by Owner; or 4.3.1.2 required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of preparation of such documents. 4.3.2 Providing services required because of significant changes in the Project including, but not limited to, scope, size, quality, complexity, Owner's schedule, except for services required under the Article entitled “Scope of Architect/Engineer’s Basic Services”. 4.3.3 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders or Construction Change Directives which require design or redesign, and which are not required to correct the Construction Documents, or which are not due to oversights of Architect/Engineer. 4.3.4 Providing consultation concerning replacement of Work damaged by fire or other cause, not a result of the Architect/Engineer, its consultants or other representatives’ actions, during construction, and furnishing services required in connection with the replacement of such Work. 4.3.5 Providing services made necessary by the default of Construction Managerthe Builder, by major defects or deficiencies in the Work of Construction Managerthe Builder, or by failure of performance of either Owner or Construction Manager Builder under the Contract for Construction. 4.3.6 When required by Owner, preparing documents for alternate, separate, sequential bids, or phased construction. 4.3.7 Programming the requirements of the Project, if not included in the original Project scope. 4.3.8 Providing planning surveys, Site evaluations or comparative studies of prospective sites. 4.3.9 Providing special surveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 4.3.10 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Project scope. 4.3.11 Making measured drawings of existing construction when required for planning additions or alterations thereto. 4.3.12 Providing coordination of construction performed by separate contractors Builders or by Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by Owner. 4.3.13 Providing detailed estimates of Construction Cost beyond that already required in Basic Services. 4.3.14 Providing interior design and other similar services required for or in connection with the selection, procurement or installation of furniture, furnishings and related equipment. 4.3.15 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 4.3.16 Preparing and submitting a set of reproducible as-built record drawings on BIM or AutoCAD electronic files, showing significant changes in the Work made during construction based on marked-up prints, drawings and other data furnished by Construction Manager the Builder to Architect/Engineer. Architect/Engineer will submit one set of reproducible as-built record drawings along with the as-built record drawings on archival quality disks (CD’s). 4.3.17 Providing services after issuance by Owner of the final payment to Construction Managerthe Builder, except for the post occupancy inspection as described in the FIU Professional Services Guide, which is part of Architect/Engineer’s Basic Services. 4.3.18 When requested by Architect/Engineer in writing and approved by Owner in writing writing, providing services of consultants for other than architectural, structural, civil, mechanical and electrical engineering portions of the Project or other than any special consultants included as a part of the Project team on Architect/Engineer's Professional Qualification Supplement, which are included as a part of Basic Services. 4.3.19 Providing site Site surveys, geotechnical testing services or other special tests, if required. 4.3.20 Providing special inspection on threshold buildings buildings, if applicable, as defined in Chapter 553, Florida Statutes. All threshold reports shall be signed and sealed by the architect or engineer of record. 4.3.21 Providing prolonged contract administration and construction observation should the construction time specified for Substantial Completion be exceeded by more than sixty (60) days due to no fault of Architect/Engineer. In no case shall the initial sixty (60) day period be considered for additional compensation beyond Basic Services. 4.3.22 Providing any other services not otherwise included in this Agreement and which have been pre-approved preapproved by Owner in writing. For clarification purposes, Architect/Engineer acknowledges and agrees that if any of the activities in this Article are included in the FIU Professional Services Guide, any such activity is part of Architect/Engineer’s Basic Services and not considered an Additional Service under this Agreement.

Other Additional Services. 4.3.1 Making revisions in Drawings, Specifications or other documents but only if such revisions are: 4.3.1.1 inconsistent with approvals or instructions previously given by the Owner; or 4.3.1.2 required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of preparation of such documents. 4.3.2 Providing services required because of significant changes in the Project including, but not limited to, scope, size, quality, complexity, the Owner's schedule, except for services required under the Article entitled “Scope of Architect/Engineer’s Basic Services”. 4.3.3 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders or Construction Change Directives which require design or redesign, and which are not required to correct the Construction Documents, or which are not due to oversights of the Architect/Engineer. 4.3.4 Providing consultation concerning replacement of Work damaged by fire or other cause, not a result of the Architect/Engineer, its consultants or other representatives’ actions, during construction, and furnishing services required in connection with the replacement of such Work. 4.3.5 Providing services made necessary by the default of the Construction Manager, by major defects or deficiencies in the Work of the Construction Manager, or by failure of performance of either the Owner or Construction Manager under the Contract for Construction. 4.3.6 When required by the Owner, preparing documents for alternate, separate, sequential bids, or phased construction. 4.3.7 Programming the requirements of the Project, if not included in the original Project scopeScope. 4.3.8 Providing planning surveys, Site site evaluations or comparative studies of prospective sites. 4.3.9 Providing special surveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 4.3.10 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Project scope. 4.3.11 Making measured drawings of existing construction when required for planning additions or alterations thereto. 4.3.12 Providing coordination of construction performed by separate contractors or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 4.3.13 Providing detailed estimates of Construction Cost beyond that already required in Basic Services. 4.3.14 Providing interior design and other similar services required for or in connection with the selection, procurement or installation of furniture, furnishings and related equipment. 4.3.15 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 4.3.16 Preparing and submitting a set of reproducible as-built record drawings on BIM or AutoCAD electronic files, showing significant changes in the Work made during construction based on marked-up prints, drawings and other data furnished by the Construction Manager to the Architect/Engineer. The Architect/Engineer will submit one set of reproducible as-built record drawings along with the as-built record drawings on archival quality disks (CD’s). 4.3.17 Providing services after issuance by the Owner of the final payment to the Construction Manager, except for the post occupancy inspection as described in the FIU Professional Services Guide, which is part of the Architect/Engineer’s Basic Services. 4.3.18 When requested by the Architect/Engineer in writing and approved by the Owner in writing providing services of consultants for other than architectural, structural, civil, mechanical and electrical engineering portions of the Project or other than any special consultants included as a part of the Project team Team on the Architect/Engineer's Professional Qualification Supplement, which are included as a part of Basic Services. 4.3.19 Providing site surveys, geotechnical testing services or other special tests, if required. 4.3.20 Providing special inspection on threshold buildings as defined in Chapter 553, Florida Statutes. All threshold reports shall be signed and sealed by the architect or engineer of record. 4.3.21 Providing prolonged contract administration and construction observation should the construction time specified for Substantial Completion substantial completion be exceeded by more than sixty (60) days due to no fault of the Architect/Engineer. In no case shall the initial sixty (60) day period be considered for additional compensation beyond Basic Servicesbasic services. 4.3.22 Providing any other services not otherwise included in this Agreement and which have been pre-approved by Owner in writing. For clarification purposes, Architect/Engineer acknowledges and agrees that if any of the activities in this Article are included in the FIU Professional Services Guide, any such activity is part of Architect/Engineer’s Basic Services and not considered an Additional Service under this Agreement.

Other Additional Services. 4.3.1 Making revisions in Drawings, Specifications or other documents but only if such revisions are: 4.3.1.1 inconsistent with approvals or instructions previously given by the Owner; or 4.3.1.2 required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of preparation of such documents. 4.3.2 Providing services required because of significant changes in the Project including, but not limited to, scope, size, quality, complexity, the Owner's schedule, except for services required under the Article entitled “Scope of Architect/Engineer’s Basic Services”. 4.3.3 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders or Construction Change Directives which require design or redesign, and which are not required to correct the Construction Documents, or which are not due to oversights of the Architect/Engineer. 4.3.4 Providing consultation concerning replacement of Work damaged by fire or other cause, not a result of the Architect/Engineer, its consultants or other representatives’ representatives actions, during construction, and furnishing services required in connection with the replacement of such Work. 4.3.5 Providing services made necessary by the default of Construction Managerthe Builder, by major defects or deficiencies in the Work of Construction Managerthe Builder, or by failure of performance of either the Owner or Construction Manager Builder under the Contract for Construction. 4.3.6 When required by the Owner, preparing documents for alternate, separate, sequential bids, or phased construction. 4.3.7 Programming the requirements of the Project, if not included in the original Project scopeScope. 4.3.8 Providing planning surveys, Site site evaluations or comparative studies of prospective sites. 4.3.9 Providing special surveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 4.3.10 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Project scope. 4.3.11 Making measured drawings of existing construction when required for planning additions or alterations thereto. 4.3.12 Providing coordination of construction performed by separate contractors Builders or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 4.3.13 Providing detailed estimates of Construction Cost beyond that already required in Basic Services. 4.3.14 Providing interior design and other similar services required for or in connection with the selection, procurement or installation of furniture, furnishings and related equipment. 4.3.15 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 4.3.16 Preparing and submitting a set of reproducible as-built record drawings on BIM or AutoCAD electronic filesfiles , showing significant changes in the Work made during construction based on marked-up prints, drawings and other data furnished by Construction Manager the Builder to the Architect/Engineer. The Architect/Engineer will submit one set of reproducible as-built record drawings along with the as-built record drawings on archival quality disks (CD’s). 4.3.17 Providing services after issuance by the Owner of the final payment to Construction Managerthe Builder, except for the post occupancy inspection as described in the FIU State University System Professional Services Guide, which is part of Architect/Engineer’s Basic Servicesdated December 1998. 4.3.18 When requested by the Architect/Engineer in writing and approved by the Owner in writing providing services of consultants for other than architectural, structural, civil, mechanical and electrical engineering portions of the Project or other than any special consultants included as a part of the Project team Team on the Architect/Engineer's Professional Qualification Supplement, which are included as a part of Basic Services. 4.3.19 Providing site surveys, geotechnical testing services or other special tests, if required. 4.3.20 Providing special inspection on threshold buildings buildings, if applicable, as defined in Chapter 553, Florida Statutes. All threshold reports shall be signed and sealed by the architect or engineer of record. 4.3.21 Providing prolonged contract administration and construction observation should the construction time specified for Substantial Completion be exceeded by more than sixty (60) days due to no fault of Architect/Engineer. In no case shall the initial sixty (60) day period be considered for additional compensation beyond Basic Services. 4.3.22 Providing any other services not otherwise included in this Agreement and which have been pre-pre- approved by Owner in writing. For clarification purposes, Architect/Engineer acknowledges and agrees that if any of the activities in this Article are included in the FIU Professional Services Guide, any such activity is part of Architect/Engineer’s Basic Services and not considered an Additional Service under this Agreement.

Other Additional Services. 4.3.1 Making revisions in Drawings, Specifications or other documents but only if such revisions are: 4.3.1.1 inconsistent with approvals or instructions previously given by the Owner; or 4.3.1.2 required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of preparation of such documents. 4.3.2 Providing services required because of significant changes in the Project including, but not limited to, scope, size, quality, complexity, the Owner's schedule, except for services required under the Article entitled “Scope of Architect/Engineer’s Basic Services”. 4.3.3 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders or Construction Change Directives which require design or redesign, and which are not required to correct the Construction Documents, or which are not due to oversights of the Architect/Engineer. 4.3.4 Providing consultation concerning replacement of Work damaged by fire or other cause, not a result of the Architect/Engineer, its consultants or other representatives’ actions, during construction, and furnishing services required in connection with the replacement of such Work. 4.3.5 Providing services made necessary by the default of Construction Managerthe Builder, by major defects or deficiencies in the Work of Construction Managerthe Builder, or by failure of performance of either the Owner or Construction Manager Builder under the Contract for Construction. 4.3.6 When required by the Owner, preparing documents for alternate, separate, sequential bids, or phased construction. 4.3.7 Programming the requirements of the Project, if not included in the original Project scopeScope. 4.3.8 Providing planning surveys, Site site evaluations or comparative studies of prospective sites. 4.3.9 Providing special surveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 4.3.10 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Project scope. 4.3.11 Making measured drawings of existing construction when required for planning additions or alterations thereto. 4.3.12 Providing coordination of construction performed by separate contractors Builders or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 4.3.13 Providing detailed estimates of Construction Cost beyond that already required in Basic Services. 4.3.14 Providing interior design and other similar services required for or in connection with the selection, procurement or installation of furniture, furnishings and related equipment. 4.3.15 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 4.3.16 Preparing and submitting a set of reproducible as-built record drawings on BIM or AutoCAD electronic files, showing significant changes in the Work made during construction based on marked-up prints, drawings and other data furnished by Construction Manager the Builder to the Architect/Engineer. The Architect/Engineer will submit one set of reproducible as-built record drawings along with the as-built record drawings on archival quality disks (CD’s). 4.3.17 Providing services after issuance by the Owner of the final payment to Construction Managerthe Builder, except for the post occupancy inspection as described in the FIU Professional Services Guide, which is part of the Architect/Engineer’s Basic Services. 4.3.18 When requested by the Architect/Engineer in writing and approved by the Owner in writing providing services of consultants for other than architectural, structural, civil, mechanical and electrical engineering portions of the Project or other than any special consultants included as a part of the Project team Team on the Architect/Engineer's Professional Qualification Supplement, which are included as a part of Basic Services. 4.3.19 Providing site surveys, geotechnical testing services or other special tests, if required. 4.3.20 Providing special inspection on threshold buildings buildings, if applicable, as defined in Chapter 553, Florida Statutes. All threshold reports shall be signed and sealed by the architect or engineer of record. 4.3.21 Providing prolonged contract administration and construction observation should the construction time specified for Substantial Completion be exceeded by more than sixty (60) days due to no fault of Architect/Engineer. In no case shall the initial sixty (60) day period be considered for additional compensation beyond Basic Services. 4.3.22 Providing any other services not otherwise included in this Agreement and which have been pre-approved preapproved by Owner in writing. For clarification purposes, Architect/Engineer acknowledges and agrees that if any of the activities in this Article are included in the FIU Professional Services Guide, any such activity is part of Architect/Engineer’s Basic Services and not considered an Additional Service under this Agreement.

Other Additional Services. 4.3.1 Making revisions in Drawings, Specifications or other documents but only if such revisions are: 4.3.1.1 inconsistent with approvals or instructions previously given by the Owner; or 4.3.1.2 required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of preparation of such documents. 4.3.2 Providing services required because of significant changes in the Project including, but not limited to, scope, size, quality, complexity, the Owner's schedule, except for services required under the Article entitled “Scope of Architect/Engineer’s Basic Services”. 4.3.3 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders or Construction Change Directives which require design or redesign, and which are not required to correct the Construction Documents, or which are not due to oversights of the Architect/Engineer. 4.3.4 Providing consultation concerning replacement of Work damaged by fire or other cause, not a result of the Architect/Engineer, its consultants or other representatives’ representatives actions, during construction, and furnishing services required in connection with the replacement of such Work. 4.3.5 Providing services made necessary by the default of the Construction Manager, by major defects or deficiencies in the Work of the Construction Manager, or by failure of performance of either the Owner or Construction Manager under the Contract for Construction. 4.3.6 When required by the Owner, preparing documents for alternate, separate, sequential bids, or phased construction. 4.3.7 Programming the requirements of the Project, if not included in the original Project scopeScope. 4.3.8 Providing planning surveys, Site site evaluations or comparative studies of prospective sites. 4.3.9 Providing special surveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 4.3.10 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Project scope. 4.3.11 Making measured drawings of existing construction when required for planning additions or alterations thereto. 4.3.12 Providing coordination of construction performed by separate contractors or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 4.3.13 Providing detailed estimates of Construction Cost beyond that already required in Basic Services. 4.3.14 Providing interior design and other similar services required for or in connection with the selection, procurement or installation of furniture, furnishings and related equipment. 4.3.15 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 4.3.16 Preparing and submitting a set of reproducible as-built record drawings on BIM or AutoCAD electronic files, showing significant changes in the Work made during construction based on marked-up prints, drawings and other data furnished by the Construction Manager to the Architect/Engineer. The Architect/Engineer will submit one set of reproducible as-built record drawings along with the as-built record drawings on archival quality disks (CD’s). 4.3.17 Providing services after issuance by the Owner of the final payment to the Construction Manager, except for the post occupancy inspection as described in the FIU State University System Professional Services Guide, which is part of Architect/Engineer’s Basic Servicesdated December 1998. 4.3.18 When requested by the Architect/Engineer in writing and approved by the Owner in writing providing services of consultants for other than architectural, structural, civil, mechanical and electrical engineering portions of the Project or other than any special consultants included as a part of the Project team Team on the Architect/Engineer's Professional Qualification Supplement, which are included as a part of Basic Services. 4.3.19 Providing site surveys, geotechnical testing services or other special tests, if required. 4.3.20 Providing special inspection on threshold buildings as defined in Chapter 553, Florida Statutes. All threshold reports shall be signed and sealed by the architect or engineer of record. 4.3.21 Providing prolonged contract administration and construction observation should the construction time specified for Substantial Completion substantial completion be exceeded by more than sixty (60) days due to no fault of the Architect/Engineer. In no case shall the initial sixty (60) day period be considered for additional compensation beyond Basic Servicesbasic services. 4.3.22 Providing any other services not otherwise included in this Agreement and which have been pre-pre- approved by Owner in writing. For clarification purposes, Architect/Engineer acknowledges and agrees that if any of the activities in this Article are included in the FIU Professional Services Guide, any such activity is part of Architect/Engineer’s Basic Services and not considered an Additional Service under this Agreement.