Statutory Obligations and Regulations D1 Prevention of Corruption 19 D2 Prevention of Fraud 20 D3 Discrimination 21 D4 The Contracts (Rights of Third Parties) Act 1999 21 D5 Environmental Requirements 21 D6 Health and Safety 21
Additional Statutory and Regulatory Obligations Vendor acknowledges that it has the following additional obligations under Section 2-d with respect to any Protected Data received from the District, and that any failure to fulfill one or more of these statutory or regulatory obligations will be deemed a breach of the Master Agreement and the terms of this Data Sharing and Confidentiality Agreement: (a) To limit internal access to Protected Data to only those employees or subcontractors that are determined to have legitimate educational interests within the meaning of Section 2-d and the Family Educational Rights and Privacy Act (FERPA); i.e., they need access in order to assist Vendor in fulfilling one or more of its obligations to the District under the Master Agreement. (b) To not use Protected Data for any purposes other than those explicitly authorized in this Data Sharing and Confidentiality Agreement and the Master Agreement to which this Exhibit is attached. (c) To not disclose any Protected Data to any other party, except for authorized representatives of Vendor using the information to carry out Vendor’s obligations to the District and in compliance with state and federal law, regulations and the terms of the Master Agreement, unless: (i) the parent or eligible student has provided prior written consent; or (ii) the disclosure is required by statute or court order and notice of the disclosure is provided to the District no later than the time of disclosure, unless such notice is expressly prohibited by the statute or court order. (d) To maintain reasonable administrative, technical, and physical safeguards to protect the security, confidentiality, and integrity of Protected Data in its custody. (e) To use encryption technology to protect Protected Data in its custody while in motion or at rest, using a technology or methodology specified by the Secretary of the U.S. Department of Health and Human Services in guidance issued under Section 13402(H)(2) of Public Law 111-5. (f) To adopt technologies, safeguards and practices that align with the NIST Cybersecurity Framework. (g) To comply with the District’s policy on data security and privacy, Section 2-d and Part 121. (h) To not sell Protected Data nor use or disclose it for any marketing or commercial purpose or facilitate its use or disclosure by any other party for any marketing or commercial purpose or permit another party to do so. (i) To notify the District, in accordance with the provisions of Section 5 of this Data Sharing and Confidentiality Agreement, of any breach of security resulting in an unauthorized release of Protected Data by Vendor or its assignees or subcontractors in violation of applicable state or federal law, the District’s Bill of Rights for Data Security and Privacy, the District’s policies on data security and privacy, or other binding obligations relating to data privacy and security contained in the Master Agreement and this Exhibit. (j) To cooperate with the District and law enforcement to protect the integrity of investigations into the breach or unauthorized release of Protected Data. (k) To pay for or promptly reimburse the District for the full cost of notification, in the event the District is required under Section 2-d to notify affected parents, students, teachers or principals of a breach or unauthorized release of Protected Data attributed to Vendor or its subcontractors or assignees.
Statutory Obligations Nothing in this Agreement shall be construed to modify, eliminate or detract from the statutory responsibilities and obligations of the Employer except that the exercise of its rights in the furtherance of such statutory obligations shall not be in conflict with the provisions of this Agreement.
Repair Obligation If neither party elects to terminate this Lease following a Casualty, then Landlord shall, within a reasonable time after such Casualty, begin to repair the Premises and shall proceed with reasonable diligence to restore the Premises to substantially the same condition as they existed immediately before such Casualty; however, other than building standard leasehold improvements Landlord shall not be required to repair or replace any Alterations or betterments within the Premises (which shall be promptly and with due diligence repaired and restored by Tenant at Tenant’s sole cost and expense) or any furniture, equipment, trade fixtures or personal property of Tenant or others in the Premises or the Building, and Landlord’s obligation to repair or restore the Premises shall be limited to the extent of the insurance proceeds actually received by Landlord for the Casualty in question. If this Lease is terminated under the provisions of this Section 15, Landlord shall be entitled to the full proceeds of the insurance policies providing coverage for all Alterations, improvements and betterments in the Premises (and, if Tenant has failed to maintain insurance on such items as required by this Lease, Tenant shall pay Landlord an amount equal to the proceeds Landlord would have received had Tenant maintained insurance on such items as required by this Lease).
Delivery Obligations (a) The Seller shall Deliver to the Purchaser, not later than the 5th Business Day following the Determination Date for each Lot (the “Delivery Deadline”), Finished Cobalt in an amount equal to the Payable Cobalt in respect of the Parcel from which such Lot was produced (the “Delivery Amount”); provided that where such Lot is comprised of Off-Spec Material, the Seller shall provide the Purchaser with prompt (and in any event prior to the initial Delivery Deadline) written notice (an “Off-Spec Material Notice”) of the existence of such Off-Spec Material and the Delivery Deadline for such Delivery Amount shall be as follows: (i) to the extent that the Seller is able to Deliver some or all of the Delivery Amount using Finished Cobalt held on the date of the Off- Spec Material Notice by any Vale Affiliate in inventory in a Warehouse located in [REDACTED: Commercially Sensitive], the Delivery Deadline in respect of such portion of the Delivery Amount shall be not later than the 5th Business Day following the Determination Date for the relevant Lot; (ii) thereafter, to the extent that the Seller is able to Deliver some or all of any remaining portion of the Delivery Amount using Finished Cobalt held on the date of the Off-Spec Material Notice by any Vale Affiliate in inventory in a Warehouse located in [REDACTED: Commercially Sensitive], the Delivery Deadline in respect of such portion of the Delivery Amount shall be not later than the 10th Business Day following the Determination Date for the relevant Lot; and (iii) thereafter, in respect of the balance of the Delivery Amount (the “Delivery Balance”), if any, the Delivery Deadline shall be not later than the 15th Business Day following the Determination Date for the relevant Lot, subject to Section 2.2(c). Notwithstanding the foregoing, to the extent that the Seller grants or has granted a permitted Stream Equivalent Transaction required to be settled in physical cobalt to any Person other than the Purchaser, the Seller shall use its available Finished Cobalt inventory (and any other Finished Cobalt that it is able to acquire) to satisfy its delivery obligations to the Purchaser and to such other Person(s) proportionately to their respective cobalt stream percentages or similar interests in cobalt. (b) The Seller shall ensure that the Vale Affiliates maintain, at all times, an inventory of at least [REDACTED: Commercially Sensitive] tonnes of Finished Cobalt ([REDACTED: Commercially Sensitive]) in one or more Warehouses located in [REDACTED: Commercially Sensitive], provided that where the Vale Affiliates have drawn on such inventory of Finished Cobalt to meet the Seller’s Delivery obligations to the Purchaser in accordance with Section 2.2(a)(i) and any other permitted Stream Equivalent Transactions granted by the Seller that are required to be settled in physical cobalt, the Vale Affiliates shall have up to 45 days after the date of the relevant Delivery to restore such inventory of Finished Cobalt to at least [REDACTED: Commercially Sensitive] tonnes. Notwithstanding the foregoing, the Vale Affiliates shall not be required to maintain any inventory of Finished Cobalt for so long as any increase to the Stream Percentage in accordance with Section 5.3 is in effect. (c) [REDACTED: Commercially Sensitive]. (d) No later than 15 Business Days following the end of each calendar quarter, the Seller shall conduct an updated Metal Balance Determination in respect of all Lots in respect of which Deliveries of Finished Cobalt were made (or required to be made) by the Seller to the Purchaser in accordance with Section 2.2(a) within such calendar quarter and shall determine the quantity of Minerals processed at Long Harbour over the period of processing attributed to such Lots (the “Quarterly Parcel”). The Seller shall calculate the Payable Cobalt in respect of such Quarterly Parcel as if it were a Parcel and to the extent that the aggregate Payable Cobalt in respect of the Quarterly Parcel is greater or less than the Finished Cobalt actually Delivered (or required to be Delivered) by the Seller to the Purchaser during such calendar quarter in respect of such Lots, the Seller shall (subject to Section 2.2(e)) reduce or increase, as the case may be, the amount of the next following Delivery of Finished Cobalt (the “Subject Delivery”) to account for such difference (a “Delivery Adjustment”); provided that: (i) where the amount of such Subject Delivery is required to be increased by an amount of Finished Cobalt (the “Top-Up Amount”) pursuant to a Delivery Adjustment, the Top-Up Amount shall be calculated in accordance with the following formula: Top-Up Amount = A x (B/C) where: “A” is the number of pounds of Finished Cobalt by which (a) the number of pounds of Payable Cobalt calculated in respect of the Quarterly Parcel exceeds (b) the Finished Cobalt actually Delivered (or required to be Delivered) to the Purchaser during the relevant calendar quarter;
Primary Obligation This Agreement is a primary and original obligation of each Borrower and shall remain in effect notwithstanding future changes in conditions, including any change of law or any invalidity or irregularity in the creation or acquisition of any Obligations or in the execution or delivery of any agreement between Bank and any Borrower. Each Borrower shall be liable for existing and future Obligations as fully as if all of all Credit Extensions were advanced to such Borrower. Bank may rely on any certificate or representation made by any Borrower as made on behalf of, and binding on, all Borrowers, including without limitation Disbursement Request Forms, Borrowing Base Certificates and Compliance Certificates.
Supplier Obligations 7.1 The Supplier shall: 7.1.1 at all times allocate sufficient resources to supply the Services in accordance with the Contract; 7.1.2 provide and fulfil any ancillary or incidental service, function or responsibility not specified in the Service Specification where such service, function or responsibility is necessary for the proper performance of the relevant Services; 7.1.3 obtain, and maintain throughout the duration of the Contract, all the consents, approvals, licences and permissions (statutory, regulatory, contractual or otherwise) it may require and which are necessary for the provision of the Services or performance of any other obligation under this Contract; 7.1.4 ensure the Supplier Assets used in the performance of the Services will be free of all encumbrances (except as agreed in writing with the Authority); 7.1.5 ensure that in the performance of its obligations under the Contract it does not disrupt the operations of each Commissioning Body and their respective Personnel; 7.1.6 ensure that any documentation, information and training provided to each Commissioning Body under this Contract (including in relation to the use of the Website) is comprehensive, accurate and prepared in accordance with Good Industry Practice; 7.1.7 co-operate with the Other Supplier(s) and provide reasonable information (including any documentation), advice and assistance in connection with the Services to the Other Supplier(s) including to enable such Other Supplier(s) to provide services to the respective Commissioning Bodies and, on the expiry or termination of this Contract for any reason, to enable the timely transition of the Services (or any of them) to the respective Commissioning Bodies and/or to any Replacement Supplier; 7.1.8 to the extent it is legally able to do so, hold on trust for the sole benefit of the Authority, all warranties and indemnities provided by third parties or any Sub- contractor in respect of any Deliverables and/or the Services and, where any such warranties are held on trust, at its cost enforce such warranties in accordance with any reasonable directions that the Authority may notify from time to time to the Supplier; 7.1.9 unless it is unable to do so, assign to the Authority on the Authority’s written request and at the cost of the Supplier any such warranties and/or indemnities as are referred to in Clause 7.1.8; 7.1.10 provide each Commissioning Body with such advice and assistance as that Commissioning Body may reasonably require during the Contract Period in respect of the supply of the Services; 7.1.11 gather, collate and provide such information and co-operation as the Authority may reasonably request for the purposes of ascertaining the Supplier’s compliance with its obligations under the Contract; 7.1.12 notify the Authority of any circumstances suggesting that a change of Control of the Supplier is planned, in contemplation or has taken place; 7.1.13 notify the Authority in writing of any material detrimental change in the financial standing and/or any change in the credit rating of the Supplier; 7.1.14 subject to Clause 33.6, notify the Authority in writing within ten (10) Working Days of their occurrence, of any actions, suits or proceedings or regulatory investigations before any court or administrative body or arbitration tribunal pending or, to its knowledge, threatened against it that might affect its ability to perform its obligations under the Contract; and 7.1.15 ensure that neither it, nor any of its Affiliates or Personnel, bring any Commissioning Body into disrepute by engaging in any act or omission which is reasonably likely to diminish the trust that the public places in that Commissioning Body, regardless of whether or not such act or omission is related to the Supplier’s obligations under this Contract.
Developer Obligations In accordance with applicable NYISO requirements, Developer shall maintain satisfactory operating communications with Connecting Transmission Owner and NYISO. Developer shall provide standard voice line, dedicated voice line and facsimile communications at its Large Generating Facility control room or central dispatch facility through use of either the public telephone system, or a voice communications system that does not rely on the public telephone system. Developer shall also provide the dedicated data circuit(s) necessary to provide Developer data to Connecting Transmission Owner and NYISO as set forth in Appendix D hereto. The data circuit(s) shall extend from the Large Generating Facility to the location(s) specified by Connecting Transmission Owner and NYISO. Any required maintenance of such communications equipment shall be performed by Developer. Operational communications shall be activated and maintained under, but not be limited to, the following events: system paralleling or separation, scheduled and unscheduled shutdowns, equipment clearances, and hourly and daily load data.
Owner Obligations 1. Ownership is defined as the original purchaser of the floor; original proof of purchase may be required for a claim; this warranty is non-transferrable. 2. The original Owner must submit notice of all claims under this warranty to Mohawk Group within a reasonable time after discovery of the alleged defect and within the specified warranty period. All claims not made in writing and received by Mohawk within the time period specified above shall be deemed waived. 3. Claims must be submitted to xxx.xxxxxxxxxxxxx.xxx, or by email or phone at xxxxxxxxxxxxxxxxxxxx@xxxxxxxxx.xxx or 0-000-000-0000. 4. Mohawk reserves the right to require physical access to damaged floor for visual inspection and/or request images of the defective flooring; If Mohawk Group determines that carpet is to be replaced or repaired under the terms of this warranty, all areas must be free of all equipment, furnishings, partitions, and the like at the Owner’s expense.
USER OBLIGATIONS As a user of the Website or Services, You may be asked to register with Us. When You do so, You will choose a user identifier, which may be Your email address or another term, as well as a password. You may also provide personal information, including, but not limited to, Your name. You are responsible for ensuring the accuracy of this information. This identifying information will enable You to use the Website and Services. You must not share such identifying information with any third party, and if You discover that Your identifying information has been compromised, You agree to notify Us immediately in writing. Email notification will suffice. You are responsible for maintaining the safety and security of Your identifying information as well as keeping Us apprised of any changes to Your identifying information. Providing false or inaccurate information, or using the Website or Services to further fraud or unlawful activity is grounds for immediate termination of this Agreement.
