Platform Facilities. Respondents were asked a series of questions concerning the facilities that a collaborative platform might include.
Platform Facilities Sample Clauses
Related to Platform Facilities
Laundry Facilities Washers and dryers are installed in each apartment for the exclusive use of students in the apartment. Any other use is prohibited. The use of washers and dryers are free. LINEN: Brighton provides a mattress cover on all mattresses. Students need to bring their own bedding. All beds are regular twin size. The typical cost for replacing a mattress cover is $25.00. MAINTENANCE: Students are responsible to notify the manager in writing as soon as possible if they notice anything in an apartment that requires repair work or maintenance. See “Property Conditions” section 12 of the BYU-Idaho Student Landlord Housing Contract.
Facilities Keep all properties useful or necessary to Borrower's business in good repair and condition, and from time to time make necessary repairs, renewals and replacements thereto so that such properties shall be fully and efficiently preserved and maintained.
New Facilities For all new Generating Facilities to be interconnected pursuant to the Tariff, other than wind- powered and other non-synchronous generation facilities, the Generation Interconnection Customer shall design its Customer Facility to maintain a composite power delivery at continuous rated power output at a power factor of at least 0.95 leading to 0.90 lagging. For all new wind- powered and other non-synchronous generation facilities the Generation Interconnection Customer shall design its Customer Facility with the ability to maintain a composite power delivery at a power factor of at least 0.95 leading to 0.95 lagging across the full range of continuous rated power output. For all wind-powered and other non-synchronous generation facilities entering the New Service Queue on or after November 1, 2016, the power factor requirement shall be measured at the high-side of the facility substation transformers. This power factor range standard shall be dynamic and can be met using, for example, power electronics designed to supply this level of reactive capability (taking into account any limitations due to voltage level, real power output, etc.) or fixed and switched capacitors, or a combination of the two. For all wind-powered and other non-synchronous generation facilities entering the New Service Queue on or after May 1, 2015, and before November 1, 2016, the power factor requirement shall be measured at the generator’s terminals. For new generation resources of more than 20 MW, other than wind- powered and other non-synchronous Generating Facilities, the power factor requirement shall be measured at the generator’s terminals. For new generation resources of 20 MW or less, and all wind-powered and other non-synchronous generation facilities entering the New Service Queue prior to May 1, 2015, the power factor requirement shall be measured at the Point of Interconnection. Any different reactive power design criteria that Transmission Provider determines to be appropriate for a wind-powered or other non-synchronous generation facility shall be stated in the Interconnection Service Agreement. A Transmission Interconnection Customer interconnecting Merchant D.C. Transmission Facilities and/ or Controllable A.C. Merchant Transmission Facilities shall design its Customer Facility to maintain a power factor at the Point of Interconnection of at least 0.95 leading and 0.95 lagging, when the Customer Facility is operating at any level within its approved operating range.
Refinancing Facilities (a) On one or more occasions after the Effective Date, the Borrower may obtain, from any Lender or any other bank, financial institution or other institutional lender or investor that agrees to provide any portion of Refinancing Term Loans pursuant to a Refinancing Amendment in accordance with this Section 2.22 (each, an “Additional Refinancing Lender”) (provided that the Administrative Agent shall have consented (such consent not to be unreasonably withheld, conditioned or delayed) to such Lender’s or Additional Refinancing Lender’s making such Refinancing Term Loans to the extent such consent, if any, would be required under Section 9.04(b) for, and to the extent that such Additional Refinancing Lender is a Purchasing Borrower Party or an Affiliated Lender, the requirements of Section 9.04(g) and 9.04(f), respectively, shall be satisfied as if such Refinancing Term Loan were, an assignment of Term Loans to such Lender or Additional Refinancing Lender), Credit Agreement Refinancing Indebtedness in respect of all or any portion of Term Loans then outstanding under this Agreement, in the form of Refinancing Term Loans or Refinancing Term Commitments pursuant to a Refinancing Amendment; provided that no Lender is obligated hereunder to provide such Credit Agreement Refinancing Indebtedness. (b) The effectiveness of any Refinancing Amendment shall be subject to the satisfaction on the date thereof of each of the conditions set forth in Section 4.02 and, to the extent reasonably requested by the Administrative Agent, receipt by the Administrative Agent of (i) customary legal opinions, board resolutions and officers’ certificates consistent with those delivered on the Effective Date other than changes to such legal opinion resulting from a change in law, change in fact or change to counsel’s form of opinion reasonably satisfactory to the Administrative Agent and (ii) reaffirmation agreements and/or such amendments to the Security Documents as may be reasonably requested by the Administrative Agent in order to ensure that such Credit Agreement Refinancing Indebtedness is provided with the benefit of the applicable Loan Documents. (c) Each issuance of Credit Agreement Refinancing Indebtedness under Section 2.22(a) shall be in an aggregate principal amount that is (x) not less than $50,000,000 and (y) an integral multiple of $10,000,000 in excess thereof. (d) Each of the parties hereto hereby agrees that this Agreement and the other Loan Documents may be amended pursuant to a Refinancing Amendment, without the consent of any other Lenders, to the extent (but only to the extent) necessary to (i) reflect the existence and terms of the Credit Agreement Refinancing Indebtedness incurred pursuant thereto and (ii) effect such other amendments to this Agreement and the other Loan Documents as may be necessary or appropriate, in the reasonable opinion of the Administrative Agent and the Borrower, to effect the provisions of this Section 2.22, including any amendments necessary to treat the applicable Loans and/or Commitments established under the Refinancing Amendment as a new Class of Loans and/or Commitments hereunder, and the Lenders hereby expressly authorize the Administrative Agent to enter into any such Refinancing Amendment. (e) This Section 2.22 shall supersede any provisions in Section 2.17 or Section 9.02 to the contrary solely to the extent provided in this Section 2.22.
Toilet Facilities The Employer provides the Contractor access to toilet facilities. Temporary chemical toilets are provided by the Contractor where deemed necessary.
Ancillary Facilities (a) If any Borrower and any Ancillary Lender agree, subject to compliance with the requirements set forth in this Section 2.23, such Ancillary Lender shall be permitted to provide an Ancillary Facility on a bilateral basis to such Borrower. To the extent any Ancillary Facility exists, the following shall apply: (i) The applicable Revolving Commitment of the Ancillary Lender shall: (A) be deemed to be utilized by its applicable Ancillary Commitment for purposes of (1) calculating the commitment fee payable to such Ancillary Lender pursuant to Section 2.12(a) and (2) calculating the aggregate remaining amount of Revolving Exposure of all applicable Revolving Lenders available under the Revolving Facility (it being understood the commitment fee payable pursuant Section 2.12(a) to Lenders without an Ancillary Facility shall not be modified by the existence of any Ancillary Facility and for purposes of such calculation it shall be assumed that each such Lender’s Revolving Commitments have not been reduced as a result of such Ancillary Facility) (such remaining amount, the “Remaining Revolving Exposure”) and (B) not be deemed to be utilized by the Ancillary Commitment of the applicable Ancillary Lender for purposes of determining whether the Dollar Equivalent of such Ancillary Lender’s Revolving Exposure exceeds its applicable Revolving Commitment (and therefor whether such Ancillary Lender is required to make or participate in a Loan or Letter of Credit under this Agreement). (ii) Borrowings of the Remaining Revolving Exposure shall be made on a pro rata basis among the Revolving Lenders of the applicable Class (including the applicable Ancillary Lenders) pursuant to and subject to the limitations set forth in Section 2.01. (b) To request the creation of an Ancillary Facility, any Borrower shall deliver to the Administrative Agent not later than five (5) Business Days (or such shorter period agreed to by the Administrative Agent) prior to the first date on which such Ancillary Facility is proposed to be made available: (i) a notice in writing specifying: (A) the Borrower or Borrowers to which extensions of credit will be made available thereunder; (B) the first Business Day on which such Ancillary Facility shall be made and the expiration date of such Ancillary Facility (which shall be no later than the Revolving Maturity Date); (C) the type of Ancillary Facility being provided; (D) the identity of the Ancillary Lender(s); and (E) the amount and currency of the Ancillary Commitment with respect to such Ancillary Facility (which shall be expressed in any currency to which such Ancillary Lenders may agree) and shall not exceed such Ancillary Lender’s Revolving Commitment; (ii) a copy of the Ancillary Facility Documents with respect to such Ancillary Facility, together with a certificate of a Responsible Officer of the applicable Borrower(s) certifying that the terms of such Ancillary Facility satisfy the requirements set forth in this Section 2.23 (including any applicable definitions used herein); and (iii) such other information that the Administrative Agent may reasonably request in connection with such Ancillary Facility. The Administrative Agent shall give notice to each Revolving Lender of such Ancillary Facility notice. (i) Subject to the terms of this Agreement, an Affiliate of any Revolving Lender (other than a Disqualified Institution) may become an Ancillary Lender, in which case such Revolving Lender and such Affiliate shall be treated as a single Revolving Lender whose Revolving Commitment is as set forth in Schedule 2.01 or in the Assignment and Assumption pursuant to which such Revolving Lender assumed its Revolving Commitment. (ii) To the extent that this Agreement or any other Loan Document imposes any obligation on any Ancillary Lender and such Ancillary Lender is an Affiliate of a Revolving Lender and not a party thereto, the relevant Revolving Lender shall ensure that such obligation is performed by such Affiliate in compliance with the terms hereof or such other Loan Document. (iii) Each Ancillary Lender, in its capacity as such, hereby appoints the Administrative Agent as its agent for purposes of the Loan Documents and for the avoidance of doubt agrees the Administrative Agent may rely on the applicable protections and indemnities set forth herein (including those set forth in Article IX) with respect to its role as agent under the Loan Documents for such Ancillary Lender. (d) The terms and conditions of any Ancillary Facility shall be as agreed by the applicable Ancillary Lenders and the applicable Borrower thereunder; provided that such terms shall at all times: (i) permit extensions of credit thereunder to be made only to the applicable Borrower; (ii) provide that the Ancillary Commitment of the applicable Ancillary Lenders under such Ancillary Facility shall not exceed such Ancillary Lender’s USD Only Revolving Commitment or USD/Multicurrency Revolving Commitment, as applicable, and that, in the event and on such occasion that such Ancillary Commitment exceeds such USD Only Revolving Commitment or USD/Multicurrency Revolving Commitment, as applicable, such Ancillary Commitment shall be automatically reduced by the amount of such excess; (iii) provide that the Ancillary Facility Exposure shall not exceed the Ancillary Commitment with respect to such Ancillary Facility and (iv) provide that the Ancillary Commitment under such Ancillary Facility shall be canceled, and that all extensions of credit under such Ancillary Facility shall be repaid, not later than the Revolving Maturity Date unless cash collateralized or supported by the issuance of a “back to back” letter of credit in a manner meeting the requirements of clause (iv) of the definition of “Date of Full Satisfaction”. (e) (i) Each Ancillary Facility shall terminate on the Revolving Maturity Date or such earlier date (A) as provided in the relevant Ancillary Facility Document or (B) on which its expiry date occurs or on which it is cancelled in accordance with the terms of this Agreement.
Other Facilities Promptly and in no event more than ten (10) days after the effectiveness thereof, copies of (i) any documents, agreements or instruments evidencing indebtedness for borrowed money of any DT Entity and (ii) any amendment, restatement, supplement or other modification any documents, agreements or instruments evidencing indebtedness for borrowed money of any DT Entity, including, without limitation, any fee letter, waiver, consent and any other document, agreement or instrument executed in connection with any of the foregoing.
PUBLIC FACILITIES Supplier’s employees may be required to perform work at government- owned facilities, including schools. Supplier’s employees and agents must conduct themselves in a professional manner while on the premises, and in accordance with Participating Entity policies and procedures, and all applicable laws.
Trading Facilities Most open-outcry and electronic trading facilities are supported by computer-based component systems for the order-routing, execution, matching, registration or clearing of trades. As with all facilities and systems, they are vulnerable to temporary disruption or failure. Your ability to recover certain losses may be subject to limits on liability imposed by the system provider, the market, the clearing house and/or member firms. Such limits may vary; you should ask the firm with which you deal for details in this respect.
Banking Facilities Schedule 3.25 sets forth a complete and correct list of: (a) each bank, savings and loan or similar financial institution in which the Company or any of its Subsidiaries has an account or safety deposit box and the numbers of such accounts or safety deposit boxes maintained thereat; and (b) the names of all persons authorized to draw on each such account or to have access to any such safety deposit box, together with a description of the authority (and conditions thereto, if any) of each person with respect thereto.
