Common use of Policies with Insureds in Addition to Maintenance Contractor Clause in Contracts

Policies with Insureds in Addition to Maintenance Contractor. All insurance policies that are required to insure Persons (whether as named or additional insureds) in addition to Maintenance Contractor shall comply or be endorsed to comply with the following provisions. 7.3.6.1 The insurance policy shall be written or endorsed so that no acts or omissions of an insured shall vitiate coverage of the other insureds. Without limiting the foregoing, any failure on the part of a named insured to comply with reporting provisions or other conditions of the insurance policies, any breach of warranty, any action or inaction of a named insured or others, or any change in ownership of all or any portion of the Project shall not affect coverage provided to the other named insureds or additional insureds (and their respective members, directors, officers, employees, agents and project consultants). 7.3.6.2 The insurance shall apply separately to each named insured and additional insured against whom a claim is made or suit is brought, except with respect to the limits of the insurer’s liability. 7.3.6.3 All endorsements adding additional insureds to required insurance policies, shall contain no limitations, conditions, restrictions or exceptions to coverage in addition to those that apply under the insurance policy generally, and shall state that the interests and protections of each additional insured shall not be affected by any misrepresentation, act or omission of a named insured or any breach by a named insured of any provision in the policy which would otherwise result in forfeiture or reduction of coverage. To the fullest extent of coverage allowed under Chapter 151 of the Texas Insurance Code, Maintenance Contractor (if applicable) and TxDOT shall be included as additional insureds under the CGL policy using ISO Additional Insured Endorsements CG 20 10 10 01 and CG 20

Policies with Insureds in Addition to Maintenance Contractor. All insurance policies that are required to insure Persons (whether as named or additional insureds) in addition to Maintenance Contractor shall comply or be endorsed to comply with the following provisions. 7.3.6.1 7.3.6.1. The insurance policy shall be written or endorsed so that no acts or omissions of an insured shall vitiate coverage of the other insureds. Without limiting the foregoing, any failure on the part of a named insured to comply with reporting provisions or other conditions of the insurance policies, any breach of warranty, any action or inaction of a named insured or others, or any change in ownership of all or any portion of the Project shall not affect coverage provided to the other named insureds or additional insureds (and their respective members, directors, officers, employees, agents and project consultants). 7.3.6.2 7.3.6.2. The insurance shall apply separately to each named insured and additional insured against whom a claim is made or suit is brought, except with respect to the limits of the insurer’s liability. 7.3.6.3 7.3.6.3. All endorsements adding additional insureds to required insurance policies, shall contain no limitations, conditions, restrictions or exceptions to coverage in addition to those that apply under the insurance policy generally, and shall state that the interests and protections of each additional insured shall not be affected by any misrepresentation, act or omission of a named insured or any breach by a named insured of any provision in the policy which would otherwise result in forfeiture or reduction of coverage. To the fullest extent of coverage allowed under Chapter 151 of the Texas Insurance Code, Maintenance Contractor (if applicable) and TxDOT shall be included as additional insureds under the CGL policy using ISO Additional Insured Endorsements CG 20 10 10 01 and CG 20providing equivalent coverage, including products-completed operations. The commercial general liability insurance shall include completed operations liability coverage.

Policies with Insureds in Addition to Maintenance Contractor. All insurance policies that are required to insure Persons (whether as named or additional insureds) in addition to Maintenance Contractor shall comply or be endorsed to comply with the following provisions. 7.3.6.1 The insurance policy shall be written or endorsed so that no acts or omissions of an insured shall vitiate coverage of the other insureds. Without limiting the foregoing, any failure on the part of a named insured to comply with reporting provisions or other conditions of the insurance policies, any breach of warranty, any action or inaction of a named insured or others, or any change in ownership of all or any portion of the Project shall not affect coverage provided to the other named insureds or additional insureds (and their respective members, directors, officers, employees, agents and project consultants). 7.3.6.2 The insurance shall apply separately to each named insured and additional insured against whom a claim is made or suit is brought, except with respect to the limits of the insurer’s liability. 7.3.6.3 All endorsements adding additional insureds to required insurance policies, shall contain no limitations, conditions, restrictions or exceptions to coverage in addition to those that apply under the insurance policy generally, and shall state that the interests and protections of each additional insured shall not be affected by any misrepresentation, act or omission of a named insured or any breach by a named insured of any provision in the policy which would otherwise result in forfeiture or reduction of coverage. To the fullest extent of coverage allowed under Chapter 151 of the Texas Insurance Code, Maintenance Contractor (if applicable) and TxDOT shall be included as additional insureds under the CGL policy using ISO Additional Insured Endorsements CG 20 10 10 01 and CG 20providing equivalent coverage, including products-completed operations. The commercial general liability/builder’s third-party liability insurance shall include completed operations liability coverage.

Policies with Insureds in Addition to Maintenance Contractor. All insurance policies that are required to insure Persons (whether as named or additional insureds) in addition to Maintenance Contractor shall comply or be endorsed to comply with the following provisions. 7.3.6.1 7.7.6.1. The insurance policy shall be written or endorsed so that no acts or omissions of an insured shall vitiate coverage of the other insureds. Without limiting the foregoing, any failure on the part of a named insured to comply with reporting provisions or other conditions of the insurance policies, any breach of warranty, any action or inaction of a named insured or others, or any change in ownership of all or any portion of the Project shall not affect coverage provided to the other named insureds or additional insureds (and their respective members, directors, officers, employees, agents and project consultantsand, if applicable, TxDOT Consultants). 7.3.6.2 7.7.6.2. The insurance shall apply separately to each named insured and additional insured against whom which a claim is made or suit is brought, except with respect to the limits of the insurer’s liability. 7.3.6.3 7.7.6.3. All endorsements adding additional insureds to the required insurance policies, policies shall contain no limitations, conditions, restrictions or exceptions to coverage in addition to those that apply under the insurance policy generally, and shall state that the interests and protections of each such additional insured shall not be affected by any misrepresentation, act or omission of a named insured or any breach by a named insured of any provision in the policy which that would otherwise result in forfeiture or reduction of coverage. To the fullest extent of coverage allowed under Chapter 151 of the Texas Insurance Code, Maintenance Contractor (if applicable) and TxDOT shall be included as additional insureds under the CGL commercial general liability policy using ISO Additional Insured Endorsements CG 20 10 10 01 and CG 20providing equivalent coverage, including products- completed operations. The commercial general liability insurance shall include completed operations liability coverage.

Policies with Insureds in Addition to Maintenance Contractor. All insurance policies that are required to insure Persons (whether as named or additional insureds) in addition to Maintenance Contractor shall comply or be endorsed to comply with the following provisions. 7.3.6.1 The insurance policy shall be written or endorsed so that no acts or omissions of an insured shall vitiate coverage of the other insureds. Without limiting the foregoing, any failure on the part of a named insured to comply with reporting provisions or other conditions of the insurance policies, any breach of warranty, any action or inaction of a named insured or others, or any change in ownership of all or any portion of the Project shall not affect coverage provided to the other named insureds or additional insureds (and their respective members, directors, officers, employees, agents and project consultants). 7.3.6.2 The insurance shall apply separately to each named insured and additional insured against whom a claim is made or suit is brought, except with respect to the limits of the insurer’s liability. 7.3.6.3 All endorsements adding additional insureds to required insurance policies, shall contain no limitations, conditions, restrictions or exceptions to coverage in addition to those that apply under the insurance policy generally, and shall state that the interests and protections of each additional insured shall not be affected by any misrepresentation, act or omission of a named insured or any breach by a named insured of any provision in the policy which would otherwise result in forfeiture or reduction of coverage. To Additional insured endorsements may exclude liability due to the fullest extent of coverage allowed under Chapter 151 sole negligence of the Texas Insurance Code, Maintenance Contractor (if applicable) and TxDOT additional insured party. The commercial general liability/builder’s third-party liability insurance shall be included as additional insureds under the CGL policy using ISO Additional Insured Endorsements CG 20 10 10 01 and CG 20include completed operations liability coverage.

Policies with Insureds in Addition to Maintenance Contractor. All insurance policies that are required to insure Persons (whether as named or additional insureds) in addition to Maintenance Contractor shall comply or be endorsed to comply with the following provisions. 7.3.6.1 7.7.6.1. The insurance policy shall be written or endorsed so that no acts or omissions of an insured shall vitiate coverage of the other insureds. Without limiting the foregoing, any failure on the part of a named insured to comply with reporting provisions or other conditions of the insurance policies, any breach of warranty, any action or inaction of a named insured or others, or any change in ownership of all or any portion of the Project shall not affect coverage provided to the other named insureds or additional insureds (and their respective members, directors, officers, employees, agents and project consultantsand, if applicable, TxDOT Consultants). 7.3.6.2 7.7.6.2. The insurance shall apply separately to each named insured and additional insured against whom which a claim is made or suit is brought, except with respect to the limits of the insurer’s liability. 7.3.6.3 7.7.6.3. All endorsements adding additional insureds to the required insurance policies, policies shall contain no limitations, conditions, restrictions or exceptions to coverage in addition to those that apply under the insurance policy generally, and shall state that the interests and protections of each such additional insured shall not be affected by any misrepresentation, act or omission of a named insured or any breach by a named insured of any provision in the policy which that would otherwise result in forfeiture or reduction of coverage. To the fullest extent of coverage allowed under Chapter 151 of the Texas Insurance Code, Maintenance Contractor (if applicable) and TxDOT shall be included as additional insureds under the CGL commercial general liability policy using ISO Additional Insured Endorsements CG 20 10 10 01 and CG 20providing equivalent coverage, including products-

Policies with Insureds in Addition to Maintenance Contractor. All insurance policies that are required to insure Persons (whether as named or additional insureds) in addition to Maintenance Contractor shall comply or be endorsed to comply with the following provisions. 7.3.6.1 7.4.6.1 The insurance policy shall be written or endorsed so that no acts or omissions of an insured shall vitiate coverage of the other insureds. Without limiting the foregoing, any failure on the part of a named insured to comply with reporting provisions or other conditions of the insurance policies, any breach of warranty, any action or inaction of a named insured or others, or any change in ownership of all or any portion of the Project shall not affect coverage provided to the other named insureds or additional insureds (and their respective members, directors, officers, employees, agents and project consultants). 7.3.6.2 7.4.6.2 The insurance shall apply separately to each named insured and additional insured against whom a claim is made or suit is brought, except with respect to the limits of the insurer’s liability. 7.3.6.3 7.4.6.3 All endorsements adding additional insureds to required insurance policies, shall contain no limitations, conditions, restrictions or exceptions to coverage in addition to those that apply under the insurance policy generally, and shall state that the interests and protections of each additional insured shall not be affected by any misrepresentation, act or omission of a named insured or any breach by a named insured of any provision in the policy which would otherwise result in forfeiture or reduction of coverage. To Additional insured endorsements may exclude liability due to the fullest extent of coverage allowed under Chapter 151 sole negligence of the Texas Insurance Code, Maintenance Contractor (if applicable) and TxDOT additional insured party. The commercial general liability/builder’s third-party liability insurance shall be included as additional insureds under the CGL policy using ISO Additional Insured Endorsements CG 20 10 10 01 and CG 20include completed operations liability coverage.

Policies with Insureds in Addition to Maintenance Contractor. All insurance policies that are required to insure Persons (whether as named or additional insureds) in addition to Maintenance Contractor shall comply or be endorsed to comply with the following provisions. 7.3.6.1 The insurance policy shall be written or endorsed so that no acts or omissions of an insured shall vitiate coverage of the other insureds. Without limiting the foregoing, any failure on the part of a named insured to comply with reporting provisions or other conditions of the insurance policies, any breach of warranty, any action or inaction of a named insured or others, or any change in ownership of all or any portion of the Project shall not affect coverage provided to the other named insureds or additional insureds (and their respective members, directors, officers, employees, agents and project consultants). 7.3.6.2 The insurance shall apply separately to each named insured and additional insured against whom a claim Claim is made or suit is brought, except with respect to the limits of the insurer’s liability. 7.3.6.3 All endorsements adding additional insureds to required insurance policies, shall contain no limitations, conditions, restrictions or exceptions to coverage in addition to those that apply under the insurance policy generally, and shall state that the interests and protections of each additional insured shall not be affected by any misrepresentation, act or omission of a named insured or any breach by a named insured of any provision in the policy which would otherwise result in forfeiture or reduction of coverage. To Additional insured endorsements may exclude liability due to the sole negligence of the additional insured partyTo the fullest extent of coverage allowed under Chapter 151 of the Texas Insurance Code, Maintenance Contractor (if applicable) and TxDOT shall be included as additional insureds under the CGL policy policy, using ISO Additional Insured Endorsements CG 20 10 10 01 and CG 2020 37 10 01, or ensorsements providing equivalent coverage, including products- completed operations. The commercial general liability/builder’s third-party liability insurance shall include completed operations liability coverage.

Policies with Insureds in Addition to Maintenance Contractor. All insurance policies that are required to insure Persons (whether as named or additional insureds) in addition to Maintenance Contractor shall comply or be endorsed to comply with the following provisions. 7.3.6.1 7.3.6.1. The insurance policy shall be written or endorsed so that no acts or omissions of an insured shall vitiate coverage of the other insureds. Without limiting the foregoing, any failure on the part of a named insured to comply with reporting provisions or other conditions of the insurance policies, any breach of warranty, any action or inaction of a named insured or others, or any change in ownership of all or any portion of the Project shall not affect coverage provided to the other named insureds or additional insureds (and their respective members, directors, officers, employees, agents and project consultants). 7.3.6.2 7.3.6.2. The insurance shall apply separately to each named insured and additional insured against whom a claim is made or suit is brought, except with respect to the limits of the insurer’s liability. 7.3.6.3 7.3.6.3. All endorsements adding additional insureds to required insurance policies, shall contain no limitations, conditions, restrictions or exceptions to coverage in addition to those that apply under the insurance policy generally, and shall state that the interests and protections of each additional insured shall not be affected by any misrepresentation, act or omission of a named insured or any breach by a named insured of any provision in the policy which would otherwise result in forfeiture or reduction of coverage. To the fullest extent of coverage allowed under Chapter 151 of the Texas Insurance Code, Maintenance Contractor (if applicable) and TxDOT shall be included as additional insureds under the CGL policy using ISO Additional Insured Endorsements CG 20 10 10 01 and CG 20providing equivalent coverage, including products-completed operations. The commercial general liability/builder’s third-party liability insurance shall include completed operations liability coverage.