Prices for Supplied Compounds and Clinical Supply Shipment Payments
Prices for Supplied Compounds and Clinical Supply Shipment Payments Sample Clauses
Related to Prices for Supplied Compounds and Clinical Supply Shipment Payments
Clinical Supply Takeda will provide to Licensee[***] the amount of TAK-385 Licensed Compound or TAK-385 Licensed Products needed by Licensee to complete all Clinical Trials contemplated by the TAK-385 Development Plan (estimated by Licensee as of the Effective Date to be [***]), solely to the extent that Takeda can supply such TAK-385 [***] = Portions of this exhibit have been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment requested under 17 C.F.R. Sections 200.80(b)(4) and 230.406. Licensed Compound or TAK-385 Licensed Products (a) from its supply of TAK-385 Licensed Compound or TAK-385 Licensed Products in existence as of the Effective Date and which supply can be used for its intended purposes without further re-processing (the “Initial Clinical Supply”) and (b) after retaining the amount needed by Takeda for Clinical Trials in the Takeda Territory. Takeda will also provide to Licensee, at [***] any additional supplies of TAK-385 Licensed Compound or TAK-385 Licensed Products in excess of the Initial Clinical Supply needed by Licensee to complete all Clinical Trials contemplated by the TAK-385 Development Plan. Within [***] days after the Effective Date, the Parties will enter into a manufacturing and supply agreement (the “Takeda Clinical Manufacturing and Supply Agreement”), which will govern the terms and conditions of the Manufacturing and supply of the TAK-385 Licensed Compound and TAK-385 Licensed Products (including the Initial Clinical Supply) by Takeda to Licensee for Development purposes, including the exact quantities and the timelines for delivery. The Parties will negotiate the terms and conditions of such Takeda Clinical Manufacturing and Supply Agreement in good faith for a period of [***] days (as may be extended upon agreement of the Parties). As part of the negotiation related to the Takeda Clinical Manufacturing and Supply Agreement, the Parties shall discuss in good faith the ability of Takeda to supply to Licensee [***]. If the Parties have not entered into a definitive agreement within such negotiation period, then the final terms and conditions of such agreement will be resolved in accordance with Section 8.2 (Arbitration for Failure to Agree).
Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].
Manufacturing Costs Patheon shall be allowed to adjust the Fees: (i) for costs associated with the conversion of Granulations and Components into Drug Product (the “Conversion Costs”) in respect of the Drug Product based on the most recently available final Producers’ Price Index for Pharmaceutical Product as published by the U.S. Bureau of Labor Statistics or any governmental successor thereto (“PPI”) using the procedure set forth in Section 4.3 and (ii) for Component Costs to pass on the actual amount of any increase or decrease in such costs without xxxx-up. For each Contract Year in which Patheon is entitled to adjust the Fees Patheon shall provide Client with written notice of any change in the Fees within 30 days of receipt by Patheon of the Annual Forecast. The Parties agree that the Fees shall not be adjusted more than once per Contract Year, however this limitation shall not include price adjustments under section 4.3 or 4.4. In addition, notwithstanding anything herein to the contrary, Manufacturing Fees associated with Conversion Costs shall not be increased by greater than [***]% per annum in any Contract Year during the Term. There shall be no similar limitation in terms of increases in Component Costs which shall be passed on to Client in an amount equal to the actual increase paid by Patheon without markup.
Supply Price The price payable by SAVIENT to NOF for the Activated PEG manufactured and supplied by NOF pursuant to SAVIENT’s Firm Orders (“Supply Price”) shall be as set out in Exhibit C, and the price for each order shall be calculated based on SAVIENT’s total Forecast for the Year in which the order is placed regardless of whether NOF shall complete delivery in the Year in which it is ordered. By way of example, if SAVIENT’s Forecast for a particular Year is for [**] kg of the Activated PEG, then orders placed during that Year will be charged at US$[**]/Kg. If at the end of any Year actual orders purchased by SAVIENT do not fall within the applicable quantity range of the original Forecast, then the Price for the Activated PEG purchased during that Year shall be adjusted to reflect that actual volume of Activated PEG purchased by SAVIENT, provided, however, if the actual amount purchased by SAVIENT is less than Forecasted due to [**], then the Price for the Activated PEG purchased by Savient shall be based on [**]. Upon adjustment, if necessary, either SAVIENT shall pay to NOF or NOF shall credit to SAVIENT, as applicable, the balance based on the said adjustment. Any amounts owing by SAVIENT to NOF pursuant to this provision shall be remitted within [**] days of the SAVIENT’s receipt of a reconciliation statement which sets forth in specific detail the amounts purchased by SAVIENT during the Year in question; any credits owing by NOF to SAVIENT shall be applied to [**]. Provided, however, that SAVIENT shall pay to NOF only such amount as corresponds with the amount of Activated PEG which is actually delivered to SAVIENT or SAVIENT’S designee pursuant to the terms of this Agreement.
Product Supply The Parties shall reasonably cooperate and assist each other in transferring ownership of Product drug product and/or Product drug substance (such material, CERTAIN CONFIDENTIAL PORTIONS OF THIS EXHIBIT WERE OMITTED AND REPLACED WITH “[***]”. A COMPLETE VERSION OF THIS EXHIBIT HAS BEEN FILED SEPARATELY WITH THE SECRETARY OF THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO AN APPLICATION REQUESTING CONFIDENTIAL TREATMENT PURSUANT TO RULE 406 PROMULGATED UNDER THE SECURITIES ACT OF 1933, AS AMENDED. collectively, the “Product Lots”) set forth in Exhibit A attached hereto as promptly as reasonably practicable following the Effective Date; provided, however, that neither Party shall be required to pay money to any Third Party, commence any litigation with, or offer or grant any accommodation (financial or otherwise) to any Third Party. Such Product Lots shall be delivered EXW (Ex Works) (Incoterms 2010) AMGEN, Thousand Oaks, California. Any expense for shipment shall be borne by AKERO (including any import or export duties or taxes). Subject to the terms of this Section 5.4 and Section 6.2 (Additional AMGEN Warranties), AMGEN transfers the Product Lots to AKERO “as is”, and makes no other representation to AKERO in connection therewith. The Parties have entered into a Quality Agreement substantially in the form attached hereto as Exhibit F, dated as of the date hereof, governing the quality of the Product Lots to be supplied pursuant to this Section 5.4. For the avoidance of doubt, Product Lots consisting of drug product as set forth in Exhibit A supplied pursuant to this Section 5.4 shall be labeled for their intended clinical use as set forth in Exhibit A and the labeling of any Product drug product manufactured after the Effective Date shall be the responsibility of AKERO. Except for the Licensed Materials and such Product Lots to be transferred to AKERO, AKERO shall be responsible for, and shall bear the cost of, obtaining (whether by manufacturing or causing to be manufactured) research, clinical and commercial supplies of the Product. From and after the Effective Date, AKERO shall be responsible for all costs and expenses in connection with the storage of, and any stability studies performed on, the Product Lots.
Product Recalls The Company is not aware of any pattern or series of claims against the Company or any of its subsidiaries which reasonably could be expected to result in a generalized product recall relating to products sold by the Company or any of its subsidiaries, regardless of whether such product recall is formal, informal, voluntary or involuntary.
API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.
Supply of Product Salix shall use reasonable efforts to supply the Product during the Co-Promotion Period in sufficient quantities to satisfy the levels of Product sales forecasted in the then current Marketing Plan. Salix shall maintain reasonable inventory levels of the Product in order to ensure their ability to fulfill this obligation. Salix shall have the sole responsibility and right to fill orders with respect to the Product. Altana shall not solicit orders for the Product but, if for any reason, Altana shall receive an order for the Product, Altana shall promptly forward to Salix any such orders. All orders for Product shall be subject to acceptance by Salix, in its sole discretion, which acceptance shall not be unreasonably withheld. Salix may cancel any order for Product at any time after acceptance without incurring any liability to Altana. Salix shall be solely responsible for responding to requests from Target Physicians for individual patients who need the Product but are unable to afford it. Any such request shall be forwarded by Altana to Salix for processing. Salix shall have the sole right and responsibility for establishing and modifying the terms and conditions of the sale of the Product, including (a) the price at which the Product will be sold, (b) whether the Product will be subject to trade or quantity discounts, (c) whether any discount will be provided for payments on accounts receivable, (d) whether the Product will be subject to rebates, returns and allowances or retroactive price reductions, (e) the channels of distribution of the Product, and (f) whether credit [*] Confidential treatment requested; certain information omitted and filed separately with the SEC. is to be granted or refused in connection with any sale of Product. In the event that Salix fails to supply the Product as required pursuant to this Agreement for any reason other than a Force Majeure, which such failure results in lost sales for Altana, the Parties shall meet and attempt to negotiate a mutually agreeable and commercially reasonable solution. If the Parties cannot reach such an agreement within a reasonable period of time, the issue will be dealt with as contemplated under Section 4.4 of this Agreement.
Product Recall (a) If a recall is required by applicable Law, or if Buyer or Supplier reasonably determines that a recall is advisable because the goods may create a potential safety hazard, are not in compliance with any applicable code, standard or legal requirement, or contain a defect or non-conformance with the requirements of this Order occurring or likely to occur in multiple goods, which such defects or non-conformances are substantially similar or have substantially similar causes or effects (collectively a “Serial Defect”), the parties shall promptly communicate such facts to each other. At Buyer’s request, Supplier shall promptly develop a corrective action plan satisfactory to Buyer, which shall include all actions required to recall and/or repair the goods and any actions required by applicable Law (“Corrective Action Plan”) for Buyer’s review and approval. At Buyer’s election, Xxxxx may develop the Corrective Action Plan. In no event shall Buyer and Supplier’s failure to agree on the Corrective Action Plan delay the timely notification of a potential safety hazard, non-compliance or Serial Defect to users of the goods, cause either party to be non-compliant with applicable Law or prevent Buyer from taking reasonable actions to prevent injury or damage to persons, equipment or other property. Supplier and Buyer shall cooperate with and assist each other in any corrective actions and/or filings, if applicable.
Manufacture of Product Prior to commercialization of the Product, the Parties may, if appropriate for both parties, negotiate in good faith a manufacturing and supply agreement to provide for Licensor to fulfill the manufacturing requirements of Licensee for Product for sale in the European market. The cost of such manufacturing shall not be greater than * percent (*%) of the cost of any competitor cGMP contract manufacturing facility that proposes to manufacturer the Product for Licensee. * Confidential information has been omitted and filed confidentially with the Securities and Exchange Commission.
