Product Specific Terms these terms apply to specific Products referenced in this section.
Product Specifications (a) Supplier shall manufacture all Products according to the Specifications in effect as of the date of this Agreement, with such changes or additions to the Specifications of the Products related thereto as shall be requested by Buyer in accordance with this Section or as otherwise agreed in writing by the Parties. All other Products shall be manufactured with such Specifications as the Parties shall agree in writing. (b) Buyer may request changed or additional Specifications for any Product by delivering written notice thereof to Supplier not less than one hundred twenty (120) days in advance of the first Firm Order for such Product to be supplied with such changed or additional Specifications. Notwithstanding the foregoing, if additional advance time would reasonably be required in order to implement the manufacturing processes for production of a Product with any changed or additional Specifications, and to commence manufacture and delivery thereof, Supplier shall so notify Buyer, and Supplier shall not be required to commence delivery of such Product until the passage of such additional time. (c) Supplier shall be required to accommodate any change of, or additions to, the Specifications for any Product, if and only if (i) in Supplier’s good faith judgment, such changed or additional Specifications would not require Supplier to violate good manufacturing practice, (ii) the representation and warranty of Buyer deemed made pursuant to Subsection (e) below is true and correct, and (iii) Buyer agrees to reimburse Supplier for the incremental costs and expenses incurred by Supplier in accommodating the changed or additional Specifications, including the costs of acquiring any new machinery and tooling. For the avoidance of doubt, such costs and expenses shall be payable by Buyer separately from the cost of Products at such time or times as Supplier shall request. (d) Supplier shall notify Buyer in writing within thirty (30) days of its receipt of any request for changed or additional Specifications (i) whether Supplier will honor such changed or additional Specifications, (ii) if Supplier declines to honor such changed or additional Specifications, the basis therefor and (iii) if applicable, the estimated costs and expenses that Buyer will be required to reimburse Supplier in respect of the requested changes or additions, as provided in Subsection (c) above. Buyer shall notify Supplier in writing within fifteen (15) days after receiving notice of any required reimbursement whether Buyer agrees to assume such reimbursement obligation. (e) By its request for any changed or additional Specifications for any Product, Buyer shall be deemed to represent and warrant to Supplier that the manufacture and sale of the Product incorporating Buyer’s changed or additional Specifications, as a result of such incorporation, will not and could not reasonably be expected to (i) violate or conflict with any contract, agreement, arrangement or understanding to which Buyer and/or any of its Affiliates is a party, including this Agreement and any other contract, agreement, arrangement or understanding with Supplier and/or its Affiliates, (ii) infringe on any trademark, service xxxx, copyright, patent, trade secret or other intellectual property rights of any Person, or (iii) violate any Applicable Law. Buyer shall indemnify and hold Supplier and its Affiliates harmless (including with respect to reasonable attorneys’ fees and disbursements) from any breach of this representation and warranty.
MSAA Indicator Technical Specification Document This Agreement shall be interpreted with reference to the MSAA Indicator Technical Specifications document.
License Terms This license is for one full Semester. It cannot be cancelled or terminated except under the conditions cited in this license.
ODUF Packing Specifications 6.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.
Third Party Components The Products and Services may contain third party components (including open source software) subject to separate license agreements. To the limited extent a third party license expressly supersedes this XXXX, such third party license governs Customer’s use of that third party component.
Software License Terms (a) Software that is made available by a Provider to Recipient in connection with any Service (any such Software being referred to herein as “TSA-Licensed Software”) provided hereunder will be subject to the terms set forth in this Section 3.5 except as otherwise provided in the applicable Service Schedule. The Provider hereby grants to the Recipient a non-exclusive, non-transferable license to use, in object code form, any TSA-Licensed Software that is made available by the Provider pursuant to a Service Schedule. For the avoidance of doubt, the Provider that makes available any TSA-Licensed Software in connection with the provision of any Service retains the unrestricted right to enhance or otherwise modify such TSA-Licensed Software at any time, provided that such enhancements or other modifications do not disrupt the provision of such Service to the Recipient. (b) The Recipient may not exceed the number of licenses, agents, tiers, nodes, seats, or other use restrictions or authorizations, if any, specified in the applicable Service Schedule. Some TSA-Licensed Software may require license keys or contain other technical protection measures. The Recipient acknowledges that the Provider may monitor the Recipient’s compliance with use restrictions and authorizations remotely, or otherwise. If the Provider makes a license management program available which records and reports license usage information, the Recipient agrees to appropriately install, configure and execute such license management program. (c) Unless otherwise permitted by the Provider, the Recipient may only make copies or adaptations of the TSA-Licensed Software for archival purposes or when copying or adaptation is an essential step in the authorized use of TSA-Licensed Software. If the Recipient makes a copy for backup purposes and installs such copy on a backup device, the Recipient may not operate such backup installation of the TSA-Licensed Software without paying an additional license fee, except in cases where the original device becomes inoperable. If a copy is activated on a backup device in response to failure of the original device, the use on the backup device must be discontinued when the original or replacement device becomes operable. The Recipient may not copy the TSA-Licensed Software onto or otherwise use or make it available on, to, or through any public or external distributed network. Licenses that allow use over the Recipient’s intranet require restricted access by authorized users only. (d) The Recipient must reproduce all copyright notices that appear in or on the TSA-Licensed Software (including documentation) on all permitted copies or adaptations. Copies of documentation are limited to internal use. (e) Notwithstanding anything to the contrary herein, certain TSA-Licensed Software may be licensed under the applicable Service Schedule for use only on a computer system owned, controlled, or operated by or solely on behalf of the Recipient and may be further identified by the Provider by the combination of a unique number and a specific system type (“Designated System”) and such license will terminate in the event of a change in either the system number or system type, an unauthorized relocation, or if the Designated System ceases to be within the possession or control of the Recipient. (f) The Recipient will not modify, reverse engineer, disassemble, decrypt, decompile, or make derivative works of the TSA-Licensed Software. Where the Recipient has other rights mandated under statute, the Recipient will provide the Provider with reasonably detailed information regarding any intended modifications, reverse engineering, disassembly, decryption, or decompilation and the purposes therefor. (g) The Recipient may permit a consultant or subcontractor to use TSA-Licensed Software at the licensed location for the sole purpose of providing services to the Recipient. (h) Upon expiration or termination of the Service Schedule under which TSA-Licensed Software is made available, the Recipient will destroy the TSA-Licensed Software. The Recipient will remove and destroy or return to the Provider any copies of the TSA-Licensed Software that are merged into adaptations, except for individual pieces of data in the Recipient’s database. The Recipient will provide certification of the destruction of TSA-Licensed Software, and copies thereof, to the Provider. The Recipient may retain one copy of the TSA-Licensed Software subsequent to expiration or termination solely for archival purposes. (i) The Recipient may not sublicense, assign, transfer, rent, or lease the TSA-Licensed Software to any other person except as permitted in this Section 3.5. (j) The Recipient agrees that the Provider may engage a third party designated by the Provider and approved by the Recipient (such approval not to be unreasonably withheld) to audit the Recipient’s compliance with the Software License terms. Any such audit will be at the Provider’s expense, require reasonable notice, and will be performed during normal business hours. Such third party will be required to execute a non-disclosure agreement that restricts such third party from disclosing confidential information of the Recipient to the Provider, except to the extent required to report on the extent to which the Recipient is not in compliance with the Software License terms.
Project Specific Milestones In addition to the milestones stated in Section 212.5 of the Tariff, as applicable, during the term of this ISA, Interconnection Customer shall ensure that it meets each of the following development milestones: 6.1 Substantial Site work completed. On or before December 31, 2020 Interconnection Customer must demonstrate completion of at least 20% of project site construction. At this time, Interconnection Customer must submit to Interconnected Transmission Owner and Transmission Provider initial drawings, certified by a professional engineer, of the Customer Interconnection Facilities. 6.2 Delivery of major electrical equipment. On or before December 31, 2021, Interconnection Customer must demonstrate that all generating units have been delivered to Interconnection Customer’s project site.
Manufacturing Rights (a) If QED fails to supply Product ordered by ViewRay in accordance with the terms of this Agreement regarding the quantity or quality of Products supplied to ViewRay, then QED shall within fifteen (15) Business Days of said failure present ViewRay with a plan to remedy the problem and shall use Commercially Reasonable Efforts to execute such plan and remedy the problem or QED shall secure an alternative source of supply within a reasonable time at no additional cost to ViewRay. Any such alternative source of supply shall be on terms substantially identical with the terms of this Agreement. If QED is unable to provide a plan to remedy the problem or secure an alternative source of supply within [***] after its initial failure to supply, then QED shall consult with ViewRay and the parties shall work together to remedy the problem. If QED is unable to remedy the supply problem after [***] (or longer as agreed in writing by the parties), commencing with the date upon which such failure to supply began, then ViewRay may at its option, and upon notice to QED, manufacture the Products itself or through a third party in accordance with the provisions of Section 3.10(b). [***] Certain information in this document has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. (b) If ViewRay notifies QED pursuant to Section 3.10(a), above, that ViewRay will manufacture the Products itself or through a third party, QED shall (i) deliver to ViewRay within thirty (30) days media embodying or disclosing all Program technology and Program proprietary or intellectual property rights necessary to enable ViewRay or its designee to manufacture Products conforming with the Specifications; and (ii) provide ViewRay or its designee, upon request, with reasonable assistance in establishing a back-up manufacturing line. ViewRay shall require any third party ViewRay designates to manufacture Products pursuant to this Section 3.10, to agree in writing to observe the terms of this Agreement relating to confidentiality and the manufacture of Products. Notwithstanding any provision of this Section 3.10 to the contrary, in no case shall QED be required to pay ViewRay in respect of any Products purchased by ViewRay from a third party operating a back-up manufacturing line established pursuant to this Section 3.10 or manufactured by ViewRay or its Affiliates pursuant to this Section 3.10.
SINGLE-USE PRODUCTS The Board of County Commissioners has established a single-use products and plastic bags policy intended to reduce the use of products which have become globally recognized as having lasting negative impacts on the environment. Neither single-use products nor plastic bags may be sold or disbursed on County property by staff or contracted vendors, except as set forth in Orange County Administrative Regulation 9.01.03. Failure to comply with the Regulation may result in termination of the contract or other contractual remedies, and may affect future contracting with the County. The use of reusable, recyclable, biodegradable, or compostable materials is encouraged.
