We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.

For more information visit our privacy policy.

Product Yield Sample Clauses

Product Yield. CLIENT acknowledges and agrees that, due to the unpredictable nature of biological processes, Product yield cannot be guaranteed and may vary.
Product YieldWithout limiting any of Licensee's rights under Section 8.3(c), Licensee acknowledges that the output from each full batch size of 4,000 Units will likely be in the range of eighty percent (80%) to one hundred percent (100%) of the batch size and the delivery of Products in such range shall not be deemed a breach of this Agreement.
Product Yield. Yield shall be defined as pounds of feedstock as defined in Article 3.03.01 required to yield one U.S gallon of ASTM D 6751-03 quality biodiesel as measured during steady state operating conditions. To achieve Substantial Completion, the Project must demonstrate that the plant can achieve the minimum yield of no less than one gallon of acceptable biodiesel per 8.20 pounds of feedstock.
Product Yield. Pegasus Project parts shall achieve an Integrated Test Yield ("ITY") of at least sixty-five (65%) percent in accordance with the Specifications in Exhibit R. For the purposes of this Agreement, ITY shall mean the number of fully functional, full specification packaged parts expressed as a percentage of the total die produced by the integrated circuit fab. In addition, at least eighty-five (85%) percent of the Pegasus Project parts (measured on a monthly basis) which are packaged must pass all specified functional and electrical tests.
Product Yield. Yield shall be defined as pounds of feedstock as defined in Article 3.03.01 required to yield one U.S gallon of ASTM D 6751-03 quality biodiesel as measured during steady state operating conditions. Based upon analytical testing, pilot plant operations and completed mass balances, this feedstock is expected to yield between 7.80 and 8.00 pounds of feedstock per gallon of biodiesel, however, BSF will make all reasonable efforts to improve this yield during plant commissioning. To achieve Substantial Completion, the Project must demonstrate that the plant can achieve the minimum yield value of 8.00 pounds per gallon.

Related to Product Yield

  • Product Quality Isoprene, (hereinafter referred to as “Product”) supplied and maintained on consignment at Belpre in accordance with Article 6, and will be in accordance with specifications set forth in Exhibit A. Seller will facsimile to the Buyer at time of shipment a Certificate of Analysis (COA). Seller will provide Buyer six (6) months advanced notification if there is a change in the manufacturing process that will affect the material specifications of Product provided to the Buyer. Product produced by the Seller in different plants is viewed as coming from different supply sources and requires separate qualifications. Product to be shipped for the Seller from third parties must be from a third party qualified by the Buyer based on Buyer’s criteria as specified in Exhibit B. Buyer will have the right to confirm each such shipment-conforms to the agreed specification; Seller must obtain approval prior to shipment any material that does not meet the Buyers specifications. If Seller deliveries Product failing to comply with the specifications set out in Exhibit A, Seller will reimburse Buyer for freight expenses associated with such shipment and be entitled at its option to i) require Seller to replace such defective Product at a price not to exceed the invoice value or ii) to reimburse the invoice value of the defective Product. If, Buyer has cause to complain that the quality of Product delivered to it pursuant to the Contract does not comply with the specification set out in Exhibit A, Buyer will give written notice specifying the nature of its complaint and the parties will promptly meet so as to resolve that complaint. In absence of any agreement to resolve the complaint the parties will appoint at their joint cost a mutually acceptable independent surveyor to examine whether the quality of Product as delivered complied with the specifications set forth in Exhibit A. In the absence of any written notice from Buyer to Seller within 30 days after delivery of the Product, the Product shall be deemed to have been delivered and accepted by Buyer in a satisfactory condition and in all respects in accordance with the specifications and Seller shall have no liability to Buyer with respect to that delivery.

  • Royalty Rate Licensee shall pay to Licensor three percent (3%) of the first $25 million of Revenues received by Licensee or its Affiliates, and two percent (2%) of all additional Revenues received by Licensee or its Affiliates, subject to reductions pursuant to Sections 4.2.2 and 4.2.3.

  • Supply Price The price payable by SAVIENT to NOF for the Activated PEG manufactured and supplied by NOF pursuant to SAVIENT’s Firm Orders (“Supply Price”) shall be as set out in Exhibit C, and the price for each order shall be calculated based on SAVIENT’s total Forecast for the Year in which the order is placed regardless of whether NOF shall complete delivery in the Year in which it is ordered. By way of example, if SAVIENT’s Forecast for a particular Year is for [**] kg of the Activated PEG, then orders placed during that Year will be charged at US$[**]/Kg. If at the end of any Year actual orders purchased by SAVIENT do not fall within the applicable quantity range of the original Forecast, then the Price for the Activated PEG purchased during that Year shall be adjusted to reflect that actual volume of Activated PEG purchased by SAVIENT, provided, however, if the actual amount purchased by SAVIENT is less than Forecasted due to [**], then the Price for the Activated PEG purchased by Savient shall be based on [**]. Upon adjustment, if necessary, either SAVIENT shall pay to NOF or NOF shall credit to SAVIENT, as applicable, the balance based on the said adjustment. Any amounts owing by SAVIENT to NOF pursuant to this provision shall be remitted within [**] days of the SAVIENT’s receipt of a reconciliation statement which sets forth in specific detail the amounts purchased by SAVIENT during the Year in question; any credits owing by NOF to SAVIENT shall be applied to [**]. Provided, however, that SAVIENT shall pay to NOF only such amount as corresponds with the amount of Activated PEG which is actually delivered to SAVIENT or SAVIENT’S designee pursuant to the terms of this Agreement.

  • Royalty Rates In further consideration of the licenses and other rights granted to NVS under this Agreement, during the Royalty Term for a Product in a country (other than for U.S. [***] Products), NVS will pay HMI royalties based on the aggregate Net Sales by NVS, its Affiliates, and its Sublicensees in a Calendar Year of (a) all Ophthalmic Products during the Royalty Term for each such Product in such country at the rates set forth in Table 11.7.1(a) below, (b) all [***] Products in the Ex-Vivo Field during the Royalty Term for each such Product in such country at the rates set forth in Table 11.7.1(b) below, and (c) all In-Vivo [***] Products outside of the U.S. during the Royalty Term for each such Product in such country at the rates set forth in Table 11.7.1(c) below. The royalty payments made pursuant to this Section 11.7.1 (Royalty Rates), the “Royalties” and the rates set forth in Table 11.7.1(a), Table 11.7.1(b), and Table 11.7.1(c), the “Royalty Rates.” (a) Royalty Rates for Ophthalmic Products (b) Royalty Rates for [***] Products in the Ex-Vivo Field Net Sales of all [***] Products in the Ex-Vivo Field Royalty Rate Royalty Floor [***] [ ***]% [ ***]% [***] [ ***]% [ ***]% [***] [ ***]% [ ***]% (c) Royalty Rates for In-Vivo [***] Products Net Sales of all In-Vivo [***] Products outside of the U.S. Royalty Rate Royalty Floor [***] [ ***]% [ ***]% [***] [ ***]% [ ***]% [***] [ ***]% [ ***]% By way of example only, if NVS receives $[***] in Net Sales of all Ophthalmic Products during a given Calendar Year, then the Royalties payable by NVS under this Section 11.7.1 (Royalty Rates) with respect to such Ophthalmic Products during such Calendar Year would be calculated as follows: Royalty = [***] = $[***] + [***] = $[***] + [***] = $[***] = $[***]

  • Spread; Spread Multiplier; Index Maturity The “Spread” is the number of basis points (one one-hundredth of a percentage point) specified on the face hereof to be added to or subtracted from the related Interest Rate Basis or Interest Rate Bases applicable to this Note. The “Spread Multiplier” is the percentage specified on the face hereof of the related Interest Rate Basis or Interest Rate Bases applicable to this Note by which the Interest Rate Basis or Interest Rate Bases will be multiplied to determine the applicable interest rate. The “Index Maturity” is the period to maturity of the instrument or obligation with respect to which the related Interest Rate Basis or Interest Rate Bases will be calculated.

  • Fixed Kilowatt Rate Product If Clearview Energy would like to propose a change to a fixed kilowatt rate product, you will be notified by the process described in Change of Terms. Fixed price products may change due to new or modified federal, state or local laws; or regulatory actions that impose new or modified fees. 2b. Month-to-month Variable Kilowatt Rate Product – Month-to-month variable kilowatt rate products are subject to change without notice at Clearview Energy’s discretion outside of any applicable promotion. If applicable, the Monthly Base Charge may also fluctuate outside of any applicable promotion. All pricing can be viewed at xxx.XxxxxxxxxXxxxxx.xxx.

  • Annual Percentage Rate Each Receivable has an APR of not more than 25.00%.

  • Contract Year A twelve (12) month period during the term of the Agreement commencing on the Effective Date and each anniversary thereof.

  • Purchase Order Pricing/Product Deviation If a deviation of pricing/product on a Purchase Order or contract modification occurs between the Vendor and the TIPS Member, TIPS must be notified within five (5) business days of receipt of change order. TIPS reserves the right to terminate this agreement for cause or no cause for convenience with a thirty (30) days prior written notice. Termination for convenience is conditionally required under Federal Regulations 2 CFR part 200 if the customer is using federal funds for the procurement. All purchase orders presented to the Vendor, but not fulfilled by the Vendor, by a TIPS Member prior to the actual termination of this agreement shall be honored at the option of the TIPS Member. The awarded Vendor may terminate the agreement with ninety (90) days prior written notice to TIPS 0000 XX Xxx Xxxxx, Xxxxxxxxx, Xxxxx 00000. The vendor will be paid for goods and services delivered prior to the termination provided that the goods and services were delivered in accordance with the terms and conditions of the terminated agreement. This termination clause does not affect the sales agreements executed by the Vendor and the TIPS Member customer pursuant to this agreement. TIPS Members may negotiate a termination for convenience clause that meets the needs of the transaction based on applicable factors, such as funding sources or other needs. Usually, purchase orders or their equal are issued by participating TIPS Member to the awarded vendor and should indicate on the order that the purchase is per the applicable TIPS Agreement Number. Orders are typically emailed to TIPS at xxxxxx@xxxx-xxx.xxx. • Awarded Vendor delivers goods/services directly to the participating member. • Awarded Vendor invoices the participating TIPS Member directly. • Awarded Vendor receives payment directly from the participating member. • Fees are due to TIPS upon payment by the Member to the Vendor. Vendor agrees to pay the participation fee to TIPS for all Agreement sales upon receipt of payment including partial payment, from the Member Entity or as otherwise agreed by TIPS in writing and signed by an authorized signatory of TIPS.

  • Baseline For purposes of measuring a reduction in net tax revenue, the interim final rule measures actual changes in tax revenue relative to a revenue baseline (baseline). The baseline will be calculated as fiscal year 2019 (FY 2019) tax revenue indexed for inflation in each year of the covered period, with inflation calculated using the Bureau of Economic Analysis’s Implicit Price Deflator.163 FY 2019 was chosen as the starting year for the baseline because it is the last full fiscal year prior to the COVID– 162 See, e.g., Tax Policy Center, How do state earned income tax credits work?, https:// xxx.xxxxxxxxxxxxxxx.xxx/xxxxxxxx-xxxx/xxx-xx- state-earned-income-tax-credits-work/ (last visited May 9, 2021).