Provisioning and Installation Sample Clauses

Provisioning and Installation. 36.4.1. Electronic Interfaces for the exchange of ordering information will be adopted and made available to CLEC in accordance with CenturyLink operating procedures. 36.4.2. CLEC and CenturyLink may order Primary Local Carrier (“PLC”) and PIC records changes using the same order process and on a unified order (the “LSR”). 36.4.3. A general Letter of Agency (“LOA”) initiated by CLEC or CenturyLink will be required to process a PLC or PIC change order. No LOA signed by the end-user will be required to process a PLC or PIC change ordered by CLEC or CenturyLink. CLEC and CenturyLink agree that PLC and PIC change orders will be supported with appropriate documentation and verification as required by FCC and Commission rules. In the event of a subscriber complaint of an unauthorized PLC record change where the Party that ordered such change is unable to produce appropriate documentation and verification as required by FCC and Commission rules, or, if there are no rules applicable to PLC record changes, then such rules as are applicable to changes in long distance carriers of record shall apply, such Party shall be liable to pay and shall pay all nonrecurring charges associated with reestablishing the subscriber’s local service with the original local carrier as well as an Unauthorized Local Service Provider Change Charge as detailed in the applicable State Local Access Tariff and any other appropriate charges required by Applicable Rules. 36.4.4. Each Party will provide the other, if requested, as agent of the end-user customer, at the time of the PLC order, current “As Is” pre-ordering/ordering information relative to the end-user consisting of local features, products, services, elements, combinations. Each Party is responsible for ordering the Telecommunications Services desired by the end-user customer. 36.4.5. CenturyLink shall provide CLEC the ability to obtain telephone numbers, including vanity numbers from CenturyLink where CenturyLink offers these services to its end users, and to assign these numbers with the CLEC customer. Reservation and aging of numbers remain the responsibility of CenturyLink. CLEC shall pay CenturyLink the reasonable administrative costs of this function, and the monthly recurring charges listed in the appropriate State Local Access Tariff. 36.4.6. CenturyLink shall provide CLEC the ability to order all available features on its switches at Parity with what CenturyLink offers to its own end user customers (e.g., call blocking of...
Sample 1Sample 2Sample 3See All (17)
AutoNDA by SimpleDocs
Provisioning and Installation. 35.4.1. Electronic Interfaces for the exchange of ordering information will be adopted and made available to CLEC in accordance with Embarq operating procedures. 35.4.2. CLEC and Embarq may order Primary Local Carrier (“PLC”) and PIC records changes using the same order process and on a unified order (the “LSR”). 35.4.3. A general Letter of Agency (“LOA”) initiated by CLEC or Embarq will be required to process a PLC or PIC change order. No LOA signed by the end- user will be required to process a PLC or PIC change ordered by CLEC or Embarq. CLEC and Embarq agree that PLC and PIC change orders will be supported with appropriate documentation and verification as required by FCC
Sample 1Sample 2
Provisioning and Installation. 6.1 AT&T-13STATE offers CARRIER two options for purchasing LS One:
Sample 1Sample 2
Provisioning and Installation. 1.4.1. Electronic Interfaces for the exchange of ordering information will be adopted and made available to Carrier in accordance with Sprint operating procedures. 1.4.2. Carrier and Sprint may order PLC and PIC record changes using the same order process and on a unified order (the "LSR"). 1.4.3. A general Letter of Agency ("LOA") initiated by Carrier or Sprint will be required to process a PLC or PIC change order. No LOA
Sample 1
Provisioning and Installation. 1. The customer will be provided a copy of the Software in installable form on data storage media. The customer will additionally receive documentation belonging to the Software (installation guide, descrip- tion of the software product, software and/or user manual in text form). 2. In principle, the customer is responsible for installing the Software. Installation services are not covered by the scope of services to be provided by us. However, these additional services may be agreed in exchange for separate remuneration.
Sample 1

Related to Provisioning and Installation

  • Equipment Installation In order to meet its obligations under this Agreement, a Party that owns, rents, or leases equipment (the equipment owner) may require installation of such equipment on property owned by another Party (the property owner), provided that the property is being used for an electric utility purpose and that the property owner shall not be required to do so if it would thereby be prevented from performing its own obligations or exercising its rights under this Agreement.

  • Installation, Maintenance, Testing and Repair Unless otherwise agreed in writing by the Parties, to the extent required by Applicable Law, Interconnection provided by a Party shall be equal in quality to that provided by such Party to itself, any subsidiary, affiliates or third party. If either Party is unable to fulfill its obligations under this Section 14.2, it shall notify the other Party of its inability to do so and will negotiate alternative intervals in good faith. The Parties agree that to the extent required by Applicable Law, the standards to be used by a Party for isolating and clearing any disconnections and/or other outages or troubles shall be at parity with standards used by such Party with respect to itself, any subsidiary, affiliate or third party.

  • Delivery and Installation Delivery 7.1 Provided the conditions in clause 1.5 have been satisfied, we must, or must procure, the delivery of the System to the Premises. 7.2 The risk of loss or theft of, or damage to, the System passes to you on delivery of the System to the Premises.

  • Maintenance Repairs Utility Installations Trade Fixtures and Alterations (a) Section 8.1(a) is amended in its entirety to read as follows: Subject to the provisions of Sections 8.2, 10, and 15, Tenant shall, at Tenant's sole cost and expense and at all times, keep the Building Complex and every part thereof in good order, condition and repair (whether or not the need for such repairs occurs as a result of Tenant's use, any prior use, the elements or the age of such portion of the Building Complex), including, without limiting the generality of the foregoing, plumbing, electrical lighting facilities, boilers, fired or unfired pressure vessels, fire hose connections, fixtures, interior walls, exterior walls, roof, ceilings, floors, windows, doors, plate glass, and skylights, parking areas and lighting, driveways, sidewalks, landscaping, irrigation systems, and subject to Section 8.1(b) below, heating, air conditioning and ventilating systems, but excluding any items which are the responsibility of Landlord pursuant to Section 8.2 below. Tenant, in keeping the Building Complex in good order, condition and repair, shall exercise and perform good maintenance practices, including, without limitation, providing janitorial services to the Building Complex substantially equivalent to those attached hereto as Exhibit I and, snow, ice and trash removal service. Tenant's obligations shall include restorations, replacements or renewals when necessary to keep the Building Complex and all improvements thereon or a part thereof in good order, condition and state of repair. (b) Section 8.1(b) is amended in its entirety to read as follows: Tenant shall procure and pay the cost of a contract for maintenance of the heating, air conditioning and ventilating systems for the Building Complex with a reputable contractor licensed in the State of Colorado and reasonably satisfactory to Landlord. (c) Section 8.1(c) is amended to replace, in both places where it is used, the word "Premises" with the words "Building Complex" and to add the words "including, without limitation, the Premises," before the words "after twenty". (d) Section 8.2 is amended in its entirety to read as follows:

  • Installation Where installation is required, Contractor shall be responsible for placing and installing the equipment or parts in the required locations at no additional charge, unless otherwise specified in the Price Sheets. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the equipment or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, rigging, and materials required to install or replace the equipment or parts in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.

  • Software Installation The AGENCY shall request approval in writing from the COUNTY prior to installation of any software on COUNTY computer equipment. All software installations must be supervised by COUNTY technical support staff and proof of licensing is required. Upon completion, the AGENCY is responsible for reconfiguring the computers back to the original state.

  • Equipment Testing and Inspection 2.1.1 The Interconnection Customer shall test and inspect its Small Generating Facility and Interconnection Facilities prior to interconnection. The Interconnection Customer shall notify the NYISO and the Connecting Transmission Owner of such activities no fewer than five Business Days (or as may be agreed to by the Parties) prior to such testing and inspection. Testing and inspection shall occur on a Business Day. The Connecting Transmission Owner may, at its own expense, send qualified personnel to the Small Generating Facility site to inspect the interconnection and observe the testing. The Interconnection Customer shall provide the NYISO and Connecting Transmission Owner a written test report when such testing and inspection is completed. The Small Generating Facility may not commence parallel operations if the NYISO, in consultation with the Connecting Transmission Owner, finds that the Small Generating Facility has not been installed as agreed upon or may not be operated in a safe and reliable manner. 2.1.2 The NYISO and Connecting Transmission Owner shall each provide the Interconnection Customer written acknowledgment that it has received the Interconnection Customer’s written test report. Such written acknowledgment shall not be deemed to be or construed as any representation, assurance, guarantee, or warranty by the NYISO or Connecting Transmission Owner of the safety, durability, suitability, or reliability of the Small Generating Facility or any associated control, protective, and safety devices owned or controlled by the Interconnection Customer or the quality of power produced by the Small Generating Facility.

  • Licenses for Permanent Installation The contractor must comply with all State mandatory licensing requirements prior to installation. Questions on licensing requirements should be directed to the State Licensing Board. Contractor must furnish and install all furniture and materials in compliance with all applicable codes, whether local, state, or federal; and that all permits or licenses required for installation will be obtained without cost to the State.

  • Installation Services The Bitstream 2a Service includes a Standard Install as set out below (in each case to the extent that the relevant provisioning works are not already complete for the relevant Service Order).1

  • Installations Any special carpentry, wiring, electrical or other work, gas, steam, water and drainage connection shall be installed at Exhibitor’s expense, and in accordance with the building and Management’s direction.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!