Common use of QUALITY AND MEASUREMENT Clause in Contracts

QUALITY AND MEASUREMENT. 6.1 Gas supplied shall comply with the same standards of pressure and quality as applied to the supply of Gas by Transporter under the Gas Act 1986 and any applicable Statutes and Regulations in force from time to time. 6.2 Crown Gas & Power shall ensure that Transporter or Installer is responsible for the installation, operation and maintenance of each Meter. 6.3 If an AMR Device is installed (which shall be at the Installer’s discretion whether or not there is an AMR Device already on Site) at any time during the Supply Period the Customer shall permit the Installer such access required to install the AMR Device. Such installation shall be at the Installer’s cost. If the Customer requires any data from the AMR Device the Installer reserves the right to charge an additional amount for such information. 6.4 Crown Gas & Power shall, if an AMR Device is installed by them, only rely upon data from their own AMR Device. 6.5 Meter Reading shall be done by Transporter or another person appointed by Crown Gas & Power to take Meter Readings at least once each Contract Year unless where an AMR Device is fitted, in which circumstances a reading may be taken if required. 6.6 If in any Contract Month the Meter is not read or a Meter Reading is not made available promptly to Crown Gas & Power by the Meter Reader or otherwise, by the Customer when no reading has been taken (and there is no AMR Device, or the AMR Device installed is not working either at all or properly), the quantity of Gas taken by the Customer for such Contract Month shall be estimated by Crown Gas & Power based on historical trends. If an invoice covers a period of more or less than one calendar month, then Crown Gas & Power reserves the right to adjust the monthly invoice to reflect such period to coincide with the period and the payment method. 6.7 Customer may request that the Meter be verified for accuracy. Where the Meter is found to register inaccurately then appropriate adjustments to payments shall be made. If the Customer requests that the accuracy of a Meter is verified and the Meter is found to be recording properly, then the Customer shall pay for the cost of the Meter verification. 6.8 The reading shown on the Meter shall be evidence of the quantity of Gas consumed. 6.9 The quantity of Gas consumed in energy terms shall be calculated by methods referred to in Crown Gas & Power’s licence, available on request.

QUALITY AND MEASUREMENT. 6.1 Gas supplied shall comply with the same standards of pressure and quality as applied to the supply of Gas by the Transporter under the Gas Act 1986 and any other applicable Statutes statute(s) and Regulations regulations in force from time to time. 6.2 Crown Gas & Power shall ensure that the Transporter or Installer is responsible for the installation, operation and maintenance of each Meter. 6.3 If an AMR Device SMART Metering Equipment is to be installed (which shall be at the Installer’s discretion whether or not there is an AMR Device already on Sitediscretion) at any time during the Supply Period the Customer shall permit the Installer such access as is required to install the AMR DeviceSMAR Metering Equipment. Such installation shall be at the Installer’s costcost unless ancillary equipment is deemed necessary for such installation in which case the Customer shall be responsible for all costs and expenses associated with such ancillary equipment. If the Customer requires any data from the AMR Device SMART Metering Equipment the Installer reserves the right to charge an additional amount for such information. 6.4 Crown Gas & Power shall, if an AMR Device is installed by them, only rely upon data from their own AMR Device. 6.5 Meter Reading Readings shall be done collected by Transporter the Transporter, their authorised agent, or another person appointed by Crown Gas & Power to take Meter Readings at least once each Contract Year unless except where an AMR Device SMART Metering Equipment is fittedinstalled, in which circumstances a reading may be taken if requiredby the Installer, Crown Gas & Power or their authorised agent(s). 6.6 6.5 If in any Contract Month the Meter is not read or a Meter Reading is not made available promptly to Crown Gas & Power by the Meter Reader or otherwise, by the Customer when no reading has been taken (and there is no AMR Device, SMART Metering Equipment or the AMR Device SMART Metering Equipment installed is not working either properly or at all or properlyall), the quantity of Gas taken by the Customer for such Contract Month shall be estimated by Crown Gas & Power based on historical trendsPower. If an invoice covers a period of more or less than one calendar month, then Crown Gas & Power reserves the right to adjust the monthly invoice to reflect such period to coincide with the period and the payment methodconsumption for a calendar month. 6.7 6.6 The Customer may request that the Meter be verified for accuracy. Where The Customer shall, initially, be liable for all the Meter is found costs and charges of and associated with such verification process (Verification Charges) which must be paid to register inaccurately then appropriate adjustments Crown Gas & Power in full prior to payments shall be madethe examination and/or testing of the Meter. If Pending the results of such examination and/or testing, the Customer requests that the accuracy of a Meter is verified must pay Crown Gas & Power`s invoices in full as and when they fall due. Where the Meter is found to be recording properlyinaccurately Crown Gas & Power shall: (i) at its option, then either refund any overpayment or apply a credit to the Customer shall pay for Customer`s account; and (ii) refund the cost of the Meter verificationVerification Charges. 6.8 6.7 The reading shown on the Meter shall be evidence of the quantity of Gas consumed. 6.9 6.8 The quantity of Gas consumed in energy terms shall be calculated by methods referred to using formulae generally accepted in Crown the Gas & Power’s licence, available on requestindustry.

QUALITY AND MEASUREMENT. 6.1 Gas supplied shall comply with the same standards of pressure and quality as applied to the supply of Gas by Transporter under the Gas Act 1986 Xxx 0000 and any applicable Statutes and Regulations in force from time to time. 6.2 Crown Gas & Power shall ensure that Transporter or Installer is responsible for the installation, operation and maintenance of each Meter. 6.3 If an AMR Device is installed (which shall be at the Installer’s discretion whether or not there is an AMR Device already on Site) at any time during the Supply Period the Customer shall permit the Installer such access required to install the AMR Device. Such installation shall be at the Installer’s cost. If the Customer requires any data from the AMR Device the Installer reserves the right to charge an additional amount for such information. 6.4 Crown Gas & Power shall, if an AMR Device is installed by them, only rely upon data from their own AMR Device. 6.5 Meter Reading shall be done by Transporter or another person appointed by Crown Gas & Power to take Meter Readings at least once each Contract Year unless where an AMR Device is fitted, in which circumstances a reading may be taken if requiredYear. 6.6 6.4 If in any Contract Month the Meter is not read or a Meter Reading is not made available promptly to Crown Gas & Power by the Meter Reader or otherwise, by the Customer when no reading has been taken (and there is no AMR Device, or the AMR Device installed is not working either at all or properly)taken, the quantity of Gas taken by the Customer for such Contract Month shall be estimated by Crown Gas & Power based on historical trends. If an invoice covers a period of more or less than one calendar month, then Crown Gas & Power reserves the right to adjust the monthly invoice to reflect such period to coincide with the period and the payment method. 6.7 6.5 Customer may request that the Meter be verified for accuracy. Where the Meter is found to register inaccurately then appropriate adjustments to payments shall be made. If the Customer requests that the accuracy of a Meter is verified and the Meter is found to be recording properly, then the Customer shall pay for the cost of the Meter verification. 6.8 6.6 The reading shown on the Meter shall be evidence of the quantity of Gas consumed. 6.9 6.7 The quantity of Gas consumed in energy terms shall be calculated by methods referred to in Crown Gas & Power’s licence, available on request.