Quality of Work Consultant agrees that all Services performed under this Agreement will conform to the specifications of the College, be free from errors and be of professional quality according to applicable industry standards. Upon notice by the College, Consultant will promptly correct any defects without charge to the College.
Quality of Services (a) The Consultant shall be responsible for the professional quality, technical accuracy, and the coordination of all designs, drawings, specifications, and other services furnished pursuant to this Agreement. (b) To that end, the Consultant shall correct or shall revise, without additional compensation, any errors or omissions in its work product or shall make such revisions as are necessary as the result of the failure of the Consultant to provide an accurate, more efficient, and properly constructable product in its designs, drawings, specifications, or other services. (c) The County's review/approval/acceptance of or payment for the services required by this Agreement shall NOT be construed to operate as a waiver of any rights or of any cause of action arising out of the performance of this Agreement. Additionally, the Consultant shall be and remain liable to the County in accordance with applicable law for all damages to the County caused by the Consultant's negligent performance of any of the services furnished under this Agreement. (d) The rights and remedies of the County provided for under this Agreement are in addition to any other rights and remedies otherwise provided by law.
QUALITY OF CARE (a) The PHP shall assure that any and all eligible beneficiaries receive partial hospitalization services which comply with standards in Article 3.3
QUALITY OF GOODS 5.1 Voip Unlimited warrants that on delivery, the Goods shall: (a) conform in all material respects with the Goods Specification; (b) be free from material defects in design, material and workmanship; (c) be of satisfactory quality (within the meaning of the Sale of Goods Act 1979); and (d) be fit for any purpose held out by Voip Unlimited. 5.2 Subject to clause 5.3, if: (a) the Customer gives notice in writing within a reasonable time of discovery that some or all of the Goods do not comply with the warranty set out in clause 5.1; (b) Voip Unlimited is given a reasonable opportunity of examining such Goods; and (c) the Customer (if asked to do so by Voip Unlimited) returns such Goods to Voip Unlimited's place of business at Voip Unlimited's cost, Voip Unlimited shall, at its option, repair or replace the defective Goods, or refund the price of the defective Goods in full. 5.3 Voip Unlimited shall not be liable for the Goods' failure to comply with the warranty in clause 5.1 if: (a) the Customer makes any further use of such Goods after giving a notice in accordance with clause 5.2; (b) the defect arises because the Customer failed to follow Voip Unlimited's oral or written instructions as to the storage, installation, commissioning, use or maintenance of the Goods or (if there are none) good trade practice; (c) the defect arises as a result of Voip Unlimited following any drawing, design or Goods Specification supplied by the Customer; (d) the Customer alters or repairs such Goods without the written consent of Voip Unlimited; (e) the defect arises as a result of fair wear and tear, wilful damage, negligence, or abnormal working conditions; (f) the Goods differ from the Goods Specification as a result of changes made to ensure they comply with applicable statutory or regulatory standards. 5.4 Except as provided in this clause 5, Voip Unlimited shall have no liability to the Customer in respect of the Goods' failure to comply with the warranty set out in clause 5.1. 5.5 The terms of these Conditions shall apply to any repaired or replacement Goods supplied by Voip Unlimited under clause 5.2.
Inspection and Tests 3.8.1 The Procuring entity or its representative shall have the right to inspect and/or to test the goods to confirm their conformity to the Contract specifications. The Procuring entity shall notify the tenderer in writing in a timely manner, of the identity of any representatives retained for these purposes. 3.8.2 The inspections and tests may be conducted in the premises of the tenderer or its subcontractor(s), at point of delivery, and/or at the Goods’ final destination If conducted on the premises of the tenderer or its subcontractor(s), all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring entity. 3.8.3 Should any inspected or tested goods fail to conform to the Specifications, the Procuring entity may reject the equipment, and the tenderer shall either replace the rejected equipment or make alterations necessary to make specification requirements free of costs to the Procuring entity. 3.8.4 The Procuring entity’s right to inspect, test and where necessary, reject the goods after the Goods’ arrival shall in no way be limited or waived by reason of the equipment having previously been inspected, tested and passed by the Procuring entity or its representative prior to the equipment delivery. 3.8.5 Nothing in paragraph 3.8 shall in any way release the tenderer from any warranty or other obligations under this Contract.
Conformity of production 8.1. Procedures concerning conformity of production shall comply with those set out in the 1958 Agreement, Schedule 1 (E/ECE/TRANS/505/Rev.3) and meet the following requirements: 8.2. A vehicle approved pursuant to this Regulation shall be so manufactured as to conform to the type approved by meeting the requirements of paragraph 5. above; 8.3. The Type Approval Authority which has granted approval may at any time verify the conformity of control methods applicable to each production unit. The normal frequency of such inspections shall be once every two years.
Quality of Service Contractor shall perform its services with care, skill, and diligence, in accordance with the applicable professional standards currently recognized by such profession, and shall be responsible for the professional quality, technical accuracy, completeness, and coordination of all reports, designs, drawings, plans, information, specifications, and/or other items and services furnished under this Agreement. Contractor shall, without additional compensation, correct or revise any errors or deficiencies immediately upon discovery in its reports, drawings, specifications, designs, and/or other related items or services.
Responsibility of PFPC (a) PFPC shall be under no duty to take any action on behalf of the Fund except as specifically set forth herein or as may be specifically agreed to by PFPC in writing. PFPC shall be obligated to exercise care and diligence in the performance of its duties hereunder, to act in good faith and to use its best efforts in performing services provided for under this Agreement. PFPC shall be liable for any damages arising out of PFPC's failure to perform its duties under this Agreement to the extent such damages arise out of PFPC's willful misfeasance, bad faith, negligence or reckless disregard of such duties. (b) Without limiting the generality of the foregoing or of any other provision of this Agreement, PFPC shall not be under any duty or obligation to inquire into and shall not be liable for (A) the validity or invalidity or authority or lack thereof of any Oral Instruction or Written Instruction, notice or other instrument which conforms to the applicable requirements of this Agreement, and which PFPC reasonably believes to be genuine; or (B) subject to Section 10, delays or errors or loss of data occurring by reason of circumstances beyond PFPC's control, including acts of civil or military authority, national emergencies, labor difficulties, fire, flood, catastrophe, acts of God, insurrection, war, riots or failure of the mails, transportation, communication or power supply. (c) Notwithstanding anything in this Agreement to the contrary, neither PFPC nor its affiliates shall be liable to the Fund for any consequential, special or indirect losses or damages which the Fund may incur or suffer by or as a consequence of PFPC's or its affiliates' performance of the services provided hereunder, whether or not the likelihood of such losses or damages was known by PFPC or its affiliates. (d) Notwithstanding anything in this Agreement to the contrary, the Fund shall not be liable to PFPC nor its affiliates for any consequential, special or indirect losses or damages which PFPC or its affiliates may incur or suffer by or as a consequence of PFPC's performance of the services provided hereunder, whether or not the likelihood of such losses or damages was known by the Fund.
Inspections and Tests 26.1 The Supplier shall at its own expense and at no cost to the Procuring Entity carry out all such tests and/or inspections of the Goods and Related Services as are specified in the SCC. 26.2 The inspections and tests may be conducted on the premises of the Supplier or its Subcontractor, at point of delivery, and/or at the Goods' final destination, or in another place in Kenya as specified in the SCC. Subject to GCC Sub-Clause 26.3, if conducted on the premises of the Supplier or its Subcontractor, all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring Entity. 26.3 The Procuring Entity or its designated representative shall be entitled to attend the tests and/or inspections referred to in GCC Sub-Clause 26.2, provided that the Procuring Entity bear all of its own costs and expenses incurred in connection with such attendance including, but not limited to, all travelling and board and lodging expenses. 26.4 Whenever the Supplier is ready to carry out any such test and inspection, it shall give a reasonable advance notice, including the place and time, to the Procuring Entity. The Supplier shall obtain from any relevant third party or manufacturer any necessary permission or consent to enable the Procuring Entity or its designated representative to attend the test and/or inspection. 26.5 The Procuring Entity may require the Supplier to carry out any test and/or inspection not required by the Contract but deemed necessary to verify that the characteristics and performance of the Goods comply with the technical specifications codes and standards under the Contract, provided that the Supplier's reasonable costs and expenses incurred in the carrying out of such test and/or inspection shall be added to the Contract Price. Further, if such test and/or inspection impedes the progress of manufacturing and/or the Supplier's performance of its other obligations under the Contract, due allowance will be made in respect of the Delivery Dates and Completion Dates and the other obligations so affected. 26.6 The Supplier shall provide the Procuring Entity with a report of the results of any such test and/or inspection. 26.7 The Procuring Entity may reject any Goods or any part thereof that fail to pass any test and/or inspection or do not conform to the specifications. The Supplier shall either rectify or replace such rejected Goods or parts thereof or make alterations necessary to meet the specifications at no cost to the Procuring Entity, and shall repeat the test and/or inspection, at no cost to the Procuring Entity, upon giving a notice pursuant to GCC Sub- Clause 26.4. 26.8 The Supplier agrees that neither the execution of a test and/or inspection of the Goods or any part thereof, nor the attendance by the Procuring Entity or its representative, nor the issue of any report pursuant to GCC Sub-Clause 26.6, shall release the Supplier from any warranties or other obligations under the Contract.
Inspection and Testing Each Constructing Entity shall cause inspection and testing of the Interconnection Facilities that it constructs in accordance with the provisions of this section. The Construction Parties acknowledge and agree that inspection and testing of facilities may be undertaken as facilities are completed and need not await completion of all of the facilities that a Constructing Entity is building.
