Quality of Steam Sample Clauses

Quality of Steam. All Steam shall meet either of the following specifications: for high pressure level not less than 700 psig nor more than 740 psig at 700"-740"F, and for low pressure level not less than 130 psig nor more than 150 psig at 440"-480"F, and for both the high pressure level and the low pressure level, total dissolved solids and the oxygen present shall not exceed the amounts recommended by standard industrial practices for 1500 psig steam
Sample 1
AutoNDA by SimpleDocs
Quality of Steam. All Steam shall meet either of the following specifications: for high pressure level not less than 700 psig nor more than 740 psig at 700(degree)-740(degree)F, and for low pressure level not less than 130 psig nor more than 150 psig at 440(degree)-480(degree)F, and for both the high pressure level and the low pressure level, total dissolved solids and the oxygen present shall not exceed the amounts recommended by standard industrial practices for 1500 psig steam systems. Cogen and BRC acknowledge that either Party may desire temporary changes in the temperature or the pressure of the Steam from time to time. If either Party requests such a change, the Party to which the request is made shall not unreasonably deny such request; provided that Cogen shall not be required to take any action by which it would be materially adversely affected under the Power Purchase Agreement or Cogen's other agreements to sell steam to other steam users. At BRC's option and subject to the limits of Article 3.1A, BRC shall specify and Cogen shall deliver to BRC the amounts of high pressure and low pressure Steam that BRC desires; provided, however, that Cogen shall not be obligated to supply BRC with more than 581 K lbs. per hour of Steam at the high pressure level at any time (except to the extent that Cogen is able to provide more than 581 K lbs. per hour at the high pressure level, Cogen shall do so, provided that Cogen is not materially adversely affected under the Power Purchase Agreement or Cogen's other agreements to sell steam to other steam users) or 374 K lbs. per hour of Steam at the low pressure level at any time (except to the extent that Cogen is able to provide more than 374 K lbs. per hour at the low pressure level, Cogen shall do so, provided that Cogen is not materially adversely affected under the Power Purchase Agreement or Cogen's other agreements to sell steam to other steam users).
Sample 1
Quality of Steam. All Steam shall meet either of the following specifications: for high pressure level not less than 700 psig nor more than 740 psig at 700 (degrees)-740 (degrees)F, and for low pressure level not less than 130 psig nor more than 150 psig at 440 (degrees)-480 (degrees)F, and for both the high pressure level and the low pressure level, total dissolved solids and the oxygen present shall not exceed the amounts recommended by standard industrial practices for 1500 psig steam systems. At Exxon's option and subject to the limits of Article 3.1A, Exxon shall specify and Cogen shall deliver to Exxon the amounts of high pressure and low pressure Steam that Exxon desires; provided, however, that Cogen shall not be obligated to supply Exxon with more than 600 K lbs. per hour of Steam at the high pressure level at any time (except to the extent that Cogen is able to provide more than 600 K lbs. per hour at the high pressure level, Cogen shall do so, provided that Cogen is not materially adversely affected under the Power Purchase Agreement or Cogen's other agreements to sell steam to other steam users) or 600 K lbs. per hour of Steam at the low pressure level at any time (except to the extent that Cogen is able to provide more than 600 K lbs. per hour at the low pressure level, Cogen shall do so, provided that Cogen is not materially adversely affected under the Power Purchase Agreement or Cogen's other agreements to sell steam to other steam users).
Sample 1
Quality of Steam. All steam delivered to Buyer by Seller shall be at a pressure of not less than 155 p.s.i.g., saturated, when delivered to Buyer at the Point of Delivery.
Sample 1

Related to Quality of Steam

  • Quality of Services Subject to Section 1.3, Provider shall perform each of the Services (i) in a workmanlike and professional manner, (ii) with the same degree of care as it exercises in performing its own functions of a like or similar nature, (iii) utilizing individuals of suitable experience, training and skill, and (iv) in a timely manner in accordance with the provisions of this Services Agreement.

  • Quality of Work No Advance or any portion thereof shall be made with respect to defective work or to any contractor that has performed work that is defective and that has not been cured, as confirmed by the report of the Construction Consultant, but Lender may disburse all or part of any Advance before the sum shall become due if Lender believes it advisable to do so, and all such Advances or parts thereof shall be deemed to have been made pursuant to this Agreement.

  • Quality of Service At all times, Contractor shall provide Regional Airline Services with appropriate standards of care, but in no event lower than such standards utilized by Continental as of the date of this Agreement. Continental procedures, performance standards and means of measurement thereof concerning the provision of air passenger and air cargo services shall be applicable to all Regional Airline Services provided by Contractor. Contractor shall achieve at least the comparable quality of airline service as provided by Continental, subject to limitations imposed by the type of aircraft used by Contractor, its route network and the availability of equipment and facilities, as compared to those of Continental. Contractor shall comply with all airline customer service commitments or policies of Continental as of the date hereof, including without limitation the "CustomerFirst" commitments, and employee conduct, appearance and training policies in place as of the date hereof, and shall handle customer-related services in a professional, businesslike and courteous manner. In connection therewith, Contractor shall maintain aircraft cleaning cycles and policies, and shall maintain adequate staffing levels, to ensure at least a comparable level of customer service and operational efficiency that Continental achieves, including without limitation in respect of customer complaint response, ticketing and boarding timing, and baggage services. In addition, at the request of Continental, Contractor shall comply with all such airline customer service commitments, policies or standards of care of Continental as adopted, amended or supplemented after the date hereof, provided that Continental shall reimburse Contractor for the reasonable out-of-pocket costs of Contractor of complying with such policies in excess of the costs of complying with such policies as in effect as of the date of this Agreement. Contractor shall provide Continental with timely communication regarding the status of all Scheduled Flights, and shall perform closeout procedures at service levels at least as high as those of Continental at comparably-sized airports. Contractor will use Continental's standard procedures for processing and adjudicating all claims for which Contractor is responsible in an effort to avoid such matters becoming the subject of litigation or insurance claims. Contractor and Continental will periodically meet to discuss and review Contractor's customer service and handling procedures and policies and its employees' conduct, appearance and training standards and policies in an effort to ensure compliance with this Agreement, and to agree to the terms of any necessary corrective action plan and the timing of its implementation.

  • Quality of Representations The representations made by Sovereign in this Agreement are true, correct and complete in all material respects and do not omit statements necessary to make the representations not misleading under the circumstances.

  • Inspection and Testing 7.5.1 Meters, data acquisition, and related protection equipment at Generator's Interconnection Point shall be tested at least biennially by Generator in accordance with the provisions for meter testing as established in American National Standard Institute Code for Electricity Metering (ANSI) Standard C12.16 for Solid State Electricity Meters, as the same may be updated from time to time. Representatives of each Party shall be afforded an opportunity to witness such tests.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Quality Requirements Supplier shall comply with Tesla’s quality requirements set forth in Attachment 6 entitled “Tesla Motors Supplier Handbook”.

  • Responsibility of PFPC (a) PFPC shall be under no duty to take any action on behalf of the Fund except as specifically set forth herein or as may be specifically agreed to by PFPC in writing. PFPC shall be obligated to exercise care and diligence in the performance of its duties hereunder, to act in good faith and to use its best efforts in performing services provided for under this Agreement. PFPC shall be liable for any damages arising out of PFPC's failure to perform its duties under this Agreement to the extent such damages arise out of PFPC's willful misfeasance, bad faith, negligence or reckless disregard of such duties.

  • Quality of Title Each Loan, together with the Related Security related thereto, shall, at all times, be owned by the Borrower free and clear of any Lien except as provided in Section 4.2(a)(iii), and upon each Funding, the Collateral Agent as agent for the Secured Parties shall acquire a valid and perfected first priority security interest in such Loans, the Related Security related thereto and all Collections then existing or thereafter arising, free and clear of any Lien, except as provided in Section 4.2(a)(iii). No effective financing statement or other instrument similar in effect covering any Loan or Dealer Agreement shall at any time be on file in any recording office except such as may be filed (i) in favor of the Borrower in accordance with the Contribution Agreement or (ii) in favor of the Collateral Agent in accordance with this Agreement.

  • Performance of Services in Accordance with Regulatory Requirements; Furnishing of Books and Records In performing the services set forth in this Agreement, the Manager:

Time is Money Join Law Insider Premium to draft better contracts faster.