Payment for Material Completion The Contractor may request payment of the remaining contract balance, including retainage, less amounts credited the Owner or incurred as liquidated damages, and less amounts withheld for the Punchlist by reason of Minor Items or Permitted Incomplete Work (See Paragraph 6.5.3.2). Payment for Material Completion shall be made by a check payable jointly to the Contractor and Surety and shall be mailed to the Surety.
Milestone A principal event specified in the Contract Documents including the Material Completion and Occupancy Date and other events relating to an intermediate completion date or time.
Milestone Schedule Please state the status and progress of each Milestone and identify any completed Milestone(s) for the previous calendar quarter.
Milestone Event Milestone Payment [***] [***]
Due date for payment The settlement date for each Tax Invoice issued by the Distributor must be the 20th day of the month in which the Tax Invoice is received, or if the 20th day of the month is not a Working Day, the first Working Day after the 20th day. However, if the Distributor fails to send a Tax Invoice to the Trader within 10 Working Days after the last day of the month to which the Tax Invoice relates, the due date for payment is extended by 1 Working Day for each Working Day that the Tax Invoice is late.
Payment Authorization and Payment Remittance a. By providing us with names and telephone numbers, email addresses, and/or bank account information of Receivers to whom you wish to direct payments, you authorize us to follow the Payment Instructions that we receive through the Service. Once registered, you authorize us to credit your Eligible Transaction Account for payments remitted to you on behalf of a Sender without further approval from you. b. When we receive a Payment Instruction from you, you authorize us to debit your Eligible Transaction Account for the amount of any such Payment Instruction plus any related fees in effect (and as disclosed on the Site) at the time you initiate the Payment Instruction, and to remit funds on your behalf. You acknowledge and agree that any applicable fees will be charged when we receive a Payment Instruction from you, regardless of whether the Payment Instruction is ultimately completed. You also authorize us to credit your Eligible Transaction Account for the receipt of payments, including but not limited to those payments returned to us from Receivers to whom you sent payment(s) and those payments that were cancelled and returned to you because the processing of the Payment Instruction could not be completed. c. You acknowledge and agree that if your Payment Instructions identify an account by name and account number, the relevant financial institution may execute those Payment Instructions by reference to the account number only, even if such account number does not correspond to the account name. You further acknowledge and agree that financial institutions holding the account may choose to not investigate discrepancies between account names and account numbers and that we have no responsibility to investigate discrepancies between account names and account numbers. d. You agree that we will not be liable in any way for any payments that you may receive, regardless of whether you authorized the Sender to send them to you. e. We will use reasonable efforts to complete all your Payment Instructions properly. However, we shall incur no liability if we are unable to complete any transaction because of the existence of any one or more of the following circumstances: 1. If, through no fault of ours, the Eligible Transaction Account does not contain sufficient funds to complete the Payment Instruction or the Payment Instruction would exceed the credit limit of your overdraft account; 2. The Service is not working properly and you know or have been advised by us about the malfunction before you execute the Payment Instruction; 3. The payment is refused as described in Section 20 below; 4. You have not provided us with the correct information, including but not limited to the correct Payment Instructions or Eligible Transaction Account information, or the correct name and address or mobile phone number of the Receiver to whom you are initiating a Payment Instruction; and/or, 5. Circumstances beyond our control (such as, but not limited to, fire, flood, network or system down time, issues with the financial institution, or interference from an outside force) prevent the proper execution of the Payment Instruction. f. It is the responsibility of the Sender and the Receiver to ensure the accuracy of any information that they enter into the Service (including but not limited to the Payment Instructions and name, telephone number and/or email address for the Receiver to whom you are attempting to send a payment), and for informing us as soon as possible if they become aware that this information is inaccurate. We will make a reasonable effort to stop or recover a payment made to the wrong person or entity once informed, but we do not guarantee such stoppage or recovery and will bear no responsibility or liability for damages resulting from incorrect information entered by the Sender or Receiver.
Modifications and Updates to the Wire Center List and Subsequent Transition Periods 5.4.6.1 In the event AT&T identifies additional wire centers that meet the criteria set forth in Sections 5.4.2.1 or 5.4.2.2 above, but that were not included in the Master List of Unimpaired Wire Centers or AT&T’s List of Unimpaired Wire Centers, AT&T shall include such additional wire centers in a CNL. Each such list of additional wire centers shall be considered a Subsequent Wire Center List. AT&T will follow any limitations on the frequency with which it may issue such lists and notification procedures set forth in applicable Commission orders. 5.4.6.2 TWTC shall have thirty (30) business days to dispute the additional wire centers listed on AT&T’s CNL. Absent such dispute, effective thirty (30) business days after the date of a AT&T CNL providing a Subsequent Wire Center List, AT&T shall not be required to provide DS1 and DS3 Dedicated Transport, as applicable, in such additional wire center(s), except pursuant to the self-certification process as set forth in Section 1.9.1 of this Attachment. 5.4.6.3 For purposes of Section 5.4.6.1 above, AT&T shall make available DS1 and DS3 Dedicated Transport that were in service for TWTC in a wire center on the Subsequent Wire Center List as of the thirtieth (30th) business day after the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Embedded Base) until one hundred eighty (180) days after the thirtieth (30th) business day Version: 4Q06 Standard ICA 11/30/06 from the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Transition Period). 5.4.6.4 The rates set forth in Exhibit B shall apply to the Subsequent Embedded Base during the Subsequent Transition Period. 5.4.6.5 No later than one hundred eighty (180) days from AT&T’s CNL identifying the Subsequent Wire Center List, TWTC shall submit an LSR(s) or spreadsheet(s) as applicable, identifying the Subsequent Embedded Base of circuits to be disconnected or converted to other AT&T services. 5.4.6.5.1 In the case of disconnection, the applicable disconnect charges set forth in this Agreement shall apply. 5.4.6.5.2 If TWTC chooses to convert DS1 and/or DS3 Dedicated Transport to special access circuits in existence as of the Effective Date of this Agreement, AT&T will include such DS1 and/or DS3 Dedicated Transport within TWTC’s total special access circuits, and apply any discounts to which TWTC is entitled from the transition period of 3/11/2006 to the conversion date. Conversions will be subject to the switch-as-is charge set forth in Exhibit A to this Attachment 2. 5.4.6.5.3 AT&T shall not impose disconnect or nonrecurring installation charges when transitioning the Subsequent Embedded Base of DS1 and DS3 Dedicated Transport in existence as of the Effective Date of this Agreement. 5.4.6.6 If TWTC fails to submit the LSR(s) or spreadsheet(s) for all of its Subsequent Embedded Base by one hundred eighty (180) days after the date of AT&T’s CNL identifying the Subsequent Wire Center List, AT&T will identify TWTC’s remaining Subsequent Embedded Base, if any, and will transition such circuits to the equivalent tariffed AT&T service(s), or in the case of Georgia, to the equivalent 271 service(s) set forth in Exhibit 1. In the states of Florida, Kentucky, Mississippi and South Carolina, those circuits identified and transitioned by AT&T shall be subject to the applicable disconnect charges as set forth in this Agreement and the full nonrecurring charges for installation of the equivalent tariffed AT&T service as set forth in AT&T’s tariffs. In the states of Alabama, Georgia, North Carolina and Tennessee, those circuits identified and transitioned by AT&T shall be subject to the applicable switch-as-is rates set forth in Exhibit A of Attachment
Development Milestone Payments Pfizer shall make the payments set forth below within [**] days (or [**] days after [**] following the first occurrence of each event described below for a Licensed Product Covered by a Valid Claim that achieves such milestone (each event a “Development Milestone” and each payment a “Development Milestone Payment”). Development Milestone Development Milestone Payment [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**] [**]. The Development Milestone Payment in clause (2) of this Section 3.3 may become payable as set forth in Section 4.6. Whether or not the Development Milestone in clause (2) of this Section 3.3 is achieved, the Development Milestone Payment in clause (2) shall, pursuant to Section 4.6, in all cases become payable prior to the time the Development Milestone Payment in clause (3) of this Section 3.3 becomes payable. With respect to the Development Milestone in clause (3) of this Section 3.3, in the case of a [**] that is determined to have become [**], such Development Milestone, if achieved based on such [**], shall be achieved upon [**]; provided, however, if either [**], such Development Milestone shall be deemed to have been met on the date of such determination. With respect to the Development Milestone in clause (8) of this Section 3.3, such Development Milestone will be paid in [**], provided that if such Licensed Product [**]. (For the avoidance of doubt, all payment [**] that became payable prior to such [**] shall continue to be payable and there shall be [**] of the [**] Development Milestone Payment will be deemed to have been achieved and payable on [**], and will be paid by Pfizer within [**] days thereafter, until the earlier of [**]. For example, [**] of such Development Milestone, such Development Milestone Payment would be paid [**] of the Development Milestone [**]. For the avoidance of doubt: (a) except for (i) the Development Milestone Payment set forth in clause (6) of this Section 3.3 [**], (ii) the Development Milestone Payment set forth in clause (8) of this Section 3.3 [**] and (iii) the Development Milestone Payment set forth in clause (9) of this Section 3.3 [**], each Development Milestone Payment shall be payable only once upon achievement of the applicable Development Milestone and only on the first occurrence of the corresponding Development Milestone regardless of the number of Licensed Products and (b) satisfaction of a Development Milestone by an Affiliate or by a sublicensee or assignee of, or Third Party retained by, Pfizer or its Affiliates shall be deemed to have been satisfied by Pfizer for the purposes of this Section 3.3.
Commercial Operation Date Testing and Modifications Prior to the Commercial Operation Date, the Connecting Transmission Owner shall test the Connecting Transmission Owner’s Attachment Facilities (including required control technologies and protection systems) and System Upgrade Facilities and System Deliverability Upgrades and Developer shall test the Large Generating Facility and the Developer’s Attachment Facilities to ensure their safe and reliable operation. Similar testing may be required after initial operation. Developer and Connecting Transmission Owner shall each make any modifications to its facilities that are found to be necessary as a result of such testing. Developer shall bear the cost of all such testing and modifications. Developer shall generate test energy at the Large Generating Facility only if it has arranged for the injection of such test energy in accordance with NYISO procedures.
Deliverables at Triggering Event Dates; Certificates The Company agrees that on or prior to the date of the first Issuance Notice and, during the term of this Agreement after the date of the first Issuance Notice, upon: (A) the filing of the Prospectus or the amendment or supplement of any Registration Statement or Prospectus (other than a prospectus supplement relating solely to an offering of securities other than the Shares or a prospectus filed pursuant to Section 4(a)(ii)(B)), by means of a post-effective amendment, sticker or supplement, but not by means of incorporation of documents by reference into the Registration Statement or Prospectus; (B) the filing with the Commission of an annual report on Form 10-K or a quarterly report on Form 10-Q (including any Form 10-K/A or Form 10-Q/A containing amended financial information or a material amendment to the previously filed annual report on Form 10-K or quarterly report on Form 10-Q), in each case, of the Company; or (C) the filing with the Commission of a current report on Form 8-K of the Company containing amended financial information (other than information “furnished” pursuant to Item 2.02 or 7.01 of Form 8-K or to provide disclosure pursuant to Item 8.01 of Form 8-K relating to reclassification of certain properties as discontinued operations in accordance with Statement of Financial Accounting Standards No. 144) that is material to the offering of securities of the Company in the Agent’s reasonable discretion; (any such event, a “Triggering Event Date”), the Company shall furnish the Agent (but in the case of clause (C) above only if the Agent reasonably determines that the information contained in such current report on Form 8-K of the Company is material) with a certificate as of the Triggering Event Date, in the form and substance satisfactory to the Agent and its counsel, substantially similar to the form previously provided to the Agent and its counsel, modified, as necessary, to relate to the Registration Statement and the Prospectus as amended or supplemented, (A) confirming that the representations and warranties of the Company contained in this Agreement are true and correct, (B) that the Company has performed all of its obligations hereunder to be performed on or prior to the date of such certificate and as to the matters set forth in Section 5(a)(iii) hereof, and (C) containing any other certification that the Agent shall reasonably request. The requirement to provide a certificate under this Section 4(o) shall be waived for any Triggering Event Date occurring at a time when no Issuance Notice is pending or a suspension is in effect, which waiver shall continue until the earlier to occur of the date the Company delivers instructions for the sale of Shares hereunder (which for such calendar quarter shall be considered a Triggering Event Date) and the next occurring Triggering Event Date. Notwithstanding the foregoing, if the Company subsequently decides to sell Shares following a Triggering Event Date when a suspension was in effect and did not provide the Agent with a certificate under this Section 4(o), then before the Company delivers the instructions for the sale of Shares or the Agent sells any Shares pursuant to such instructions, the Company shall provide the Agent with a certificate in conformity with this Section 4(o) dated as of the date that the instructions for the sale of Shares are issued.