Requirements of Section 1129(b) of the Bankruptcy Code Sample Clauses

Requirements of Section 1129(b) of the Bankruptcy Code. If Class 3 accepts the Plan, the Debtor will seek to have the Court confirm the Plan under section 1129(b) of the Bankruptcy Code with respect to Class 6. Section 1129(b) of the Bankruptcy Code sets forth the so-called “cramdown” provisions for confirmation of a plan even if it is not accepted by all Impaired classes, as long as (a) the plan otherwise satisfies the requirements for confirmation, (b) at least one Impaired class of claims has accepted the plan without taking into consideration the votes of any insiders in such class, and (c) the plan is “fair and equitable” and does not “discriminate unfairly” as to any Impaired class that has not accepted the plan.
AutoNDA by SimpleDocs

Related to Requirements of Section 1129(b) of the Bankruptcy Code

  • COMPLIANCE WITH TAX LAW SECTION 5-a The following provisions apply to Contractors that have entered into agreements in an amount exceeding $100,000 for the purchase of goods and services: a) Before such agreement can take effect, the Contractor must have on file with the New York State Department of Taxation and Finance a Contractor Certification form (ST-220-TD). b) Prior to entering into such an agreement, the Contractor is required to provide NYSERDA with a completed Contractor Certification to Covered Agency form (Form ST-220-CA). c) Prior to any renewal period (if applicable) under the agreement, the Contractor is required to provide NYSERDA with a completed Form ST-220-CA. Certifications referenced in paragraphs (b) and (c) above will be maintained by NYSERDA and made a part hereof and incorporated herein by reference. NYSERDA reserves the right to terminate this agreement in the event it is found that the certification filed by the Contractor in accordance with Tax Law Section 5-a was false when made.

  • Application of Section 409A of the Code (a) This Agreement shall be interpreted to avoid any penalty sanctions under section 409A of the Internal Revenue Code of 1986, as amended and the regulations promulgated thereunder (the “Code”). If any payment or benefit cannot be provided or made at the time specified herein without incurring sanctions under section 409A of the Code, then such benefit or payment shall be provided in full (to extent not paid in part at earlier date) at the earliest time thereafter when such sanctions shall not be imposed. For purposes of section 409A of the Code, all payments to be made upon a termination of employment under this Agreement may only be made upon the Executive’s “separation from service” (within the meaning of such term under section 409A of the Code), each payment made under this Agreement shall be treated as a separate payment, and the right to a series of installment payments under this Agreement shall be treated as a right to a series of separate payments. In no event shall the Executive, directly or indirectly, designate the fiscal year of payment, except as permitted under section 409A of the Code. Notwithstanding any provision of this Agreement to the contrary, with respect to amounts under this Agreement are nonqualified deferred compensation subject to Section 409A, in no event shall the timing of the Executive’s execution of the Release, directly or indirectly, result in the Executive designating the calendar year of payment, and if a payment that is subject to execution of the Release could be made in more than one taxable year, payment shall be made in the later taxable year. (b) Notwithstanding anything herein to the contrary, if, at the time of the Executive’s termination of employment with the Company, the Company has securities which are publicly traded on an established securities market and the Executive is a “specified employee” (as such term is defined in section 409A of the Code) and it is necessary to postpone the commencement of any payments or benefits otherwise payable under this Agreement as a result of such termination of employment to prevent any accelerated or additional tax under section 409A of the Code, then the Company shall postpone the commencement of the payment of any such payments or benefits hereunder (without any reduction in such payments or benefits ultimately paid or provided to the Executive) that are not otherwise paid first within the ‘short-term deferral exception’ under Treas. Reg. §1.409A-1(b)(4), and then under the ‘separation pay exception’ under Treas. Reg. §1.409A-1(b)(9)(iii), until the first payroll date that occurs after the date that is 6 months following the Executive’s “separation of service” (as such term is defined under code section 409A of the Code) with the Company. If any payments are postponed due to such requirements, such postponed amounts shall be paid in a lump sum to the Executive on the first payroll date that occurs after the date that is 6 months following Executive’s separation of service with the Company. If the Executive dies during the postponement period prior to the payment of postponed amount, the amounts withheld on account of section 409A of the Code shall be paid to the personal representative of the Executive’s estate within 60 days after the date of the Executive’s death. (c) All reimbursements and in-kind benefits provided under this Agreement shall be made or provided in accordance with the requirements of section 409A of the Code, including, where applicable, the requirement that (i) any reimbursement shall be for expenses incurred during the Executive’s lifetime (or during a shorter period of time specified in this Agreement), (ii) the amount of expenses eligible for reimbursement, or in kind benefits provided, during a calendar year may not affect the expenses eligible for reimbursement, or in kind benefits to be provided, in any other calendar year, (iii) the reimbursement of an eligible expense shall be made on or before the last day of the calendar year following the year in which the expense is incurred and (iv) the right to reimbursement or in kind benefits is not subject to liquidation or exchange for another benefit.

  • Compliance with Section 409A of the Code All payments and benefits payable under this Agreement (including, without limitation, the Section 409A Payments) are intended to comply with the requirements of Section 409A of the Code. Certain payments and benefits payable under this Agreement are intended to be exempt from the requirements of Section 409A of the Code. This Agreement shall be interpreted in accordance with the applicable requirements of, and exemptions from, Section 409A of the Code and the Treasury Regulations thereunder. To the extent the payments and benefits under this Agreement are subject to Section 409A of the Code, this Agreement shall be interpreted, construed and administered in a manner that satisfies the requirements of Sections 409A(a)(2), (3) and (4) of the Code and the Treasury Regulations thereunder If the Company and the Executive determine that any compensation, benefits or other payments that are payable under this Agreement and intended to comply with Sections 409A(a)(2), (3) and (4) of the Code do not comply with Section 409A of the Code, the Treasury Regulations thereunder and other applicable authority issued by the Internal Revenue Service, to the extent permitted under Section 409A of the Code, the Treasury Regulations thereunder and any applicable authority issued by the Internal Revenue Service, the Company and the Executive agree to amend this Agreement, or take such other actions as the Company and the Executive deem reasonably necessary or appropriate, to cause such compensation, benefits and other payments to comply with the requirements of Section 409A of the Code, the Treasury Regulations thereunder and other applicable authority issued by the Internal Revenue Service, while providing compensation, benefits and other payments that are, in the aggregate, no less favorable than the compensation, benefits and other payments provided under this Agreement. In the case of any compensation, benefits or other payments that are payable under this Agreement and intended to comply with Sections 409A(a)(2), (3) and (4) of the Code, if any provision of the Agreement would cause such compensation, benefits or other payments to fail to so comply, such provision shall not be effective and shall be null and void with respect to such compensation, benefits or other payments to the extent such provision would cause a failure to comply, and such provision shall otherwise remain in full force and effect.

  • Compliance with Federal and State Work Authorization and Immigration Laws The Contractor and all subcontractors, suppliers and consultants must comply with all federal and state work authorization and immigration laws, and must certify compliance using the form set forth in Section 7 (“Georgia Security and Immigration Compliance Act Affidavits”). The required certificates must be filed with the Owner and copied maintained by the Contractor as of the beginning date of this contract and each subcontract, supplier contract, or consultant contract, and upon final payment to the subcontractor or consultant. State officials, including officials of the Georgia Department of Audits and Accounts, officials of the Owner, retain the right to inspect and audit the Project Site and employment records of the Contractor, subcontractors and consultants without notice during normal working hours until Final Completion, and as otherwise specified by law and by Rules and Regulations of the Georgia Department of Audits and Accounts.

  • Tax Law Section 5-A Section 5-a of the Tax Law, requires certain Contractors awarded State Contracts for commodities, services and technology valued at more than $100,000 to certify to the NYS Department of Taxation and Finance (DTF) that they are registered to collect New York State and local sales and compensating use taxes. The law applies to Contracts where the total amount of such Contractors’ sales delivered into New York State are in excess of $300,000 for the four quarterly periods immediately preceding the quarterly period in which the certification is made, and with respect to any affiliates and subcontractors whose sales delivered into New York State exceeded $300,000 for the four quarterly periods immediately preceding the quarterly period in which the certification is made. A Vendor is required to file the completed and notarized Form ST-220-CA with OGS certifying that the Vendor filed the ST-220-TD with the NYS Department of Taxation and Finance (DTF). Please note that the NYS Department of Taxation and Finance should receive the completed Form ST-220-TD, not OGS. OGS should only receive the Form ST-220-CA. Proposed Contractors should complete and return the certification forms within five (5) business days of request (if the forms are not completed and returned with Vendor Submission). Failure to make either of these filings may render a Vendor non- responsive and non-responsible. Each Vendor shall take the necessary steps to provide properly certified forms within a timely manner to ensure compliance with the law. Website links to the Contractor certification forms and instructions are provided below. Form No. ST- 220-TD must be filed with and returned directly to DTF and can be found at xxxx://xxx.xxx.xx.xxx/pdf/current_forms/st/st220td_fill_in.pdf. Unless the information upon which the ST-220-TD is based changes, this form only needs to be filed once with DTF. If the information changes for the Contractor, its affiliate(s), or its subcontractor(s), a new Form No. ST-220-TD must be filed with DTF. Form ST-220-CA must be submitted to OGS. This form provides the required certification that the Contractor filed the ST-220-TD with DTF. This form can be found at xxxx://xxx.xxx.xx.xxx/pdf/current_forms/st/st220ca_fill_in.pdf. Vendors may call DTF at 000-000-0000 for any and all questions relating to §5-a of the Tax Law and relating to a company's registration status with the DTF. For additional information and frequently asked questions, please refer to the DTF web site: xxxx://xxx.xxx.xx.xxx.

  • Application of Section 409A Notwithstanding anything to the contrary herein, the following provisions apply to the extent severance benefits provided herein are subject to Section 409A of the Code and the regulations and other guidance thereunder and any state law of similar effect (collectively “Section 409A”). Severance benefits shall not commence until Executive has a “separation from service” for purposes of Section 409A. If Executive is a “specified employee” within the meaning of 409A(a)(2)(B)(i) of the Code, any installment payments of Disability Base Salary Payments pursuant to Section 6.3(b) or Cash Compensation Amounts pursuant to Section 6.5(b) or 6.6(b) that are triggered by a separation from service shall be accelerated to the minimum extent necessary so that (a) the lesser of (y) the total cash severance payment amount, or (z) six (6) months of such installment payments are paid no later than March 15 of the calendar year following such termination, and (b) all amounts paid pursuant to the foregoing clause (a) will constitute separate payments for purposes of Section 1.409A-2(b)(2) of the Treasury Regulations and thus will be payable pursuant to the “short-term deferral” rule set forth in Section 1.409A-1(b)(4) of the Treasury Regulations. It is intended that if Executive is a “specified employee” within the meaning of Section 409A(a)(2)(B)(i) of the Code at the time of such separation from service the foregoing provision shall result in compliance with the requirements of Section 409A(a)(2)(B)(i) of the Code because payments to Executive will either be payable pursuant to the “short-term deferral” rule set forth in Section 1.409A-1(b)(4) of the Treasury Regulations or will not be paid until at least 6 months after separation from service. The severance benefits are intended to qualify for an exemption from application of Section 409A or comply with its requirements to the extent necessary to avoid adverse personal tax consequences under Section 409A, and any ambiguities herein shall be interpreted accordingly.

  • Compliance with Xxxxx-Xxxxx and Related Act requirements All rulings and interpretations of the Xxxxx-Xxxxx and Related Acts contained in 29 CFR parts 1, 3, and 5 are herein incorporated by reference in this contract.

  • For purposes of Sections 1.1 and 1.4, the Company shall be the designee of the Fund for receipt of purchase and redemption orders from the Account, and receipt by such designee shall constitute receipt by the Fund; provided that the Company receives the order by 4:00 p.m. Baltimore time and the Fund receives notice of such order by 9:30 a.m. Baltimore time on the next following Business Day. "Business Day" shall mean any day on which the New York Stock Exchange is open for trading and on which the Fund calculates its net asset value pursuant to the rules of the SEC.

  • Federal Funding Accountability and Transparency Act (FFATA Subrecipient shall comply with the requirements of 2 CFR part 25 Universal Identifier and System for Award Management (XXX). Subrecipient must have an active registration in XXX, xxxxx://xxx.xxx.gov/XXX/ in accordance with 2 CFR part 25, appendix A, and must have a Data Universal Numbering System (DUNS) number xxxxx://xxxxxx.xxx.xxx/webform/ Subrecipient must also comply with provisions of the Federal Funding Accountability and Transparency Act, which includes requirements on executive compensation, 2 CFR part 170 Reporting Subaward and Executive Compensation Information.

  • Compliance with Code Section 409A The intent of the parties is that payments and benefits under this Agreement comply with or are exempt from Section 409A of the Code and this Agreement shall be interpreted and construed in a manner that establishes an exemption from (or compliance with) the requirements of Code Section 409A. Any terms of this Agreement that are undefined or ambiguous shall be interpreted in a manner that complies with Code Section 409A to the extent necessary to comply with Code Section 409A. Notwithstanding anything herein to the contrary, (i) if, on the date of termination, the Executive is a “specified employee” as defined in Section 409A of the Code, and the deferral of the commencement of any payments or benefits otherwise payable hereunder as a result of such termination of employment is necessary in order to prevent any accelerated or additional tax under Code Section 409A, then the Company will defer the commencement of the payment of any such payments or benefits hereunder (without any reduction in such payments or benefits ultimately paid or provided to the Executive) until the date that is the first business day of the seventh month following the date of termination (or the earliest date as is permitted under Code Section 409A), and (ii) if any other payments of money or other benefits due to the Executive hereunder could cause the application of an accelerated or additional tax under Code Section 409A, such payments or other benefits shall be deferred if deferral will make such payment or other benefits compliant under Code Section 409A. In the event that payments under this Agreement are deferred pursuant to this Section in order to prevent any accelerated tax or additional tax under Code Section 409A, then such payments shall be paid at the time specified under this Section without any interest thereon. Notwithstanding anything to the contrary herein, to the extent required by Code Section 409A, a termination of employment shall not be deemed to have occurred for purposes of any provision of this Agreement providing for the payment of amounts or benefits upon or following a termination of employment unless such termination is also a “separation from service” within the meaning of Section 409A of the Code and, for purposes of any such provision of this Agreement, references to a “termination,” “termination of employment” or like terms shall mean separation from service. Each payment made under this Agreement shall be treated as a separate payment and the right to a series of installment payments under this Agreement is to be treated as a right to a series of separate payments.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!