Returns for Visual Defect Sample Clauses

Returns for Visual Defect. Customer must notify TSE in writing of any damage to the outer packaging or the Products, shortage, or other discrepancy ("Visual Defect") within three business days after receipt of the shipment; otherwise, Customer is deemed to have accepted the Products. (B) Returns for Product Warranty: Customer must notify TSE in writing stating the specific Product defect within the warranty period. TSE will only issue an RMA if the defect (either for Visual Defect or for Product Warranty) is created solely by TSE or the original manufacturer, and only if Customer meets the notice requirement. TSE will not grant RMAs for damage, shortage, or other discrepancy created by Customer, the carrier or freight provider, or any other third party. Upon receiving the RMA, Customer must return the Products to TSE in compliance with TSE's instructions in the RMA under CIP Destination incoterm. TSE may assess all Products returned by Customer via RMA. If TSE determines such Products are not eligible for return, TSE will send such Products back to Customer under CIP Destination incoterm with freight costs charged to Customer on freight collect basis, or hold such Products for Customer's FCA collection from TSE’s location and on account at Customer's expense. No Product return shall be accepted in the case of: 1) consumable Products", 2) Products with open or damaged packaging except in the event of opening or damage attributable to TSE exclusively. 3) Products that have been specifically ordered for the Customer, 4) Products that have been modified on behalf of the Customer 5) and Products declared obsolete.
Sample 1
AutoNDA by SimpleDocs
Returns for Visual Defect. Spottune Receipt of written notice of any damage to outer packaging, damage to Products, shortage of Products, or other discrepancy ("Visual Defect") within three (3) business days after receipt of the shipment; otherwise, Customer is deemed to have accepted the Products;
Sample 1

Related to Returns for Visual Defect

  • Remedies for Environmental Defects (a) If any Environmental Defect described in a notice delivered in accordance with Section 4.03 is not cured on or before the Closing, and Seller has not elected to exclude the affected Assets from this sale or Buyer and Seller have not agreed for Seller to indemnify Buyer for the Environmental Defect, then the Purchase Price shall be reduced by the Environmental Defect Value of such Environmental Defect as agreed by the Parties. (b) If Buyer and Seller have not agreed as to the validity of any asserted Environmental Defect, or if the Parties have not agreed on the Environmental Defect Value therefor, and if Seller shall not have elected to exclude the affected Assets from this sale pursuant to Section 4.03(b)(ii), then either Party shall have the right to elect to have the validity of the asserted Environmental Defect, and/or the Environmental Defect Value for such Environmental Defect, determined by an Independent Expert pursuant to Section 16.03. If the validity of any such asserted Environmental Defect or the amount of any such Environmental Defect Value is not determined by the Closing, the Asset affected by such disputed Environmental Defect shall be excluded from the Closing and the Purchase Price paid at the Closing shall be reduced by the Allocated Value of that Asset. Upon resolution of such dispute, the Allocated Value of that Asset less the Environmental Defect Value, if any, found to be attributable to such Environmental Defect shall, subject to this Section 4.04, be paid by Buyer to Seller and the Asset conveyed to Buyer, if that is part of the mutually agreed settlement. Notwithstanding the foregoing, either Buyer or Seller shall have the right to exclude an Asset from the sale if the Environmental Defect Value exceeds the Allocated Value of the Asset(s) affected thereby. (c) Notwithstanding anything to the contrary in this Agreement, (i) if the Environmental Defect Value for a given individual Environmental Defect does not exceed $50,000, then no adjustment to the Purchase Price shall be made for such Environmental Defect; (ii) if the aggregate adjustment to the Purchase Price determined in accordance with this Agreement for Title Defects and Environmental Defects does not exceed three percent (3%) of the Purchase Price prior to any adjustments thereto, then no adjustment of the Purchase Price shall be made therefore and (iii) if the aggregate adjustment to the Purchase Price determined in accordance with this Agreement for Title Defects and Environmental Defects does exceed three percent (3%) of the Purchase Price prior to any adjustments thereto, then the Purchase Price shall only be adjusted by the amount of such excess.

  • Liability for defects 5.1 The Customer is required to inspect the delivered Products without undue delay after delivery and to report any defects. 5.2 The delivered Products are deemed to have been approved if XXXX, with regard to obvious defects, obvious shortages or other defects which were or would have been identifiable in the course of an immediate, careful inspection, has not received notifi- cation of the defect within 7 days of delivery of the product, or otherwise – in the case of unclear or hidden defects – within 7 days of the discovery of the defect or the time at which the defect was identifiable to the Customer in the course of normal use of the Product without closer inspection. 5.3 In the event of a justified complaint, the Customer will be entitled to two attempts to rectify defects or make a replacement delivery at XXXX'x discretion free of charge within a reasonable period of time. Shortages will be delivered subsequently. If two attempts to rectify defects or make a replacement delivery within a reasonable period of time are unsuccessful, the Customer will be entitled to the statutory rights, subject to the provisions of clause 7. Subsequent performance will include neither removal of the defective item nor reassembly if XXXX was not originally required to carry out assembly. The expenses required for the purpose of inspection and subsequent performance, in particular transport, travel, labour and material costs (not: removal and assembly costs), insofar as these are not increased because the subject matter of the contract is located at a place other than our Customer's place of performance, will be borne by XXXX if there is actually a defect. Otherwise, XXXX may demand compensation from the Customer for the costs incurred by the unjustified request for rectification of the defect (in particular inspection and transport costs), unless the lack of defectiveness was not identifiable for the Customer. XXXX can refuse to rectify defects or make a replacement delivery if the Customer does not fulfil its payment obligations towards XXXX to an extent that corresponds to the defect-free part of the service provided. 5.4 No warranty will be assumed, in particular, in the following cases: Unsuitable or in- correct use by the Customer or by third parties instructed by the Customer, in particular through the use of insufficiently qualified personnel, faulty assembly or commission- ing, natural wear and tear (wearing parts), faulty or negligent handling, improper maintenance, unsuitable operating materials, defective construction work, unsuitable construction land, chemical, electrochemical or electrical influences, provided XXXX is not responsible for these circumstances. 5.5 XXXX is also not required to provide a warranty insofar as defects of Products are based on defective materials supplied by the Customer or insofar as defects of Products are based on the fact that the Customer has prescribed the execution of the order ac- cording to construction plans of third parties. 5.6 A delivery of used Products agreed with the Customer in the individual case is made to the exclusion of any warranty, unless XXXX has caused the defect intentionally or through gross negligence or has fraudulently concealed the defect. 5.7 The warranty period will be one year from delivery or, where acceptance was stipu- lated, from acceptance. Replaced parts will become our property and must be sent to us at our request. If shipping, assembly or commissioning is delayed through no fault of our own, our liability will expire no later than twelve months after the transfer of risk. 5.8 The right of recovery in accordance with sections 445a, 445b German Civil Code (BGB) is excluded, unless XXXX has caused the defect intentionally or by gross neg- ligence or has fraudulently concealed the defect.

  • Notice of Defects If, based on Consulting Engineer/Architect's involvement during the construction phase, Consulting Engineer/Architect observes or otherwise becomes aware of any defect in the work, he shall give prompt written notice to City of such defects and their approximate location on the Project. However, Consulting Engineer/Architect shall not have control over or charge of and shall not be responsible for construction means, methods, techniques, sequences or procedures, or for safety precautions, inspections and programs in connection with the work, since these are solely the contractor's responsibility under the contract for construction. Consulting Engineer/Architect shall not be responsible for the contractor's schedules or failure to carry out the work in accordance with the Contract Documents. Consulting Engineer/Architect shall not have control over or charge of acts or omissions of the contractor, contractor's subcontractors, or their agents or employees.

  • Liability for Past Records Neither the Custodian nor any Domestic Subcustodian shall have any liability in respect of any loss, damage or expense suffered by a Fund, insofar as such loss, damage or expense arises from the performance of the Custodian or any Domestic Subcustodian in reliance upon records that were maintained for such Fund by entities other than the Custodian or any Domestic Subcustodian prior to the Custodian's employment hereunder.

  • Remedies for Title Defects (a) With respect to each Title Defect that Seller does not cure on or before the Closing, except as otherwise provided in this Section 3.05, the Purchase Price shall be reduced by an amount equal to the Title Defect Value agreed upon in writing by Buyer and Seller or, if Buyer agrees, Seller shall indemnify Buyer pursuant to Section 14.04 against all costs which Buyer may incur in connection with such Title Defect. If any Title Defect is in the nature of an unobtained consent to assignment or other restriction on assignability, the provisions of Section 3.08 shall apply. (b) Except for those affected Assets which Seller elects to exclude from this transaction pursuant to Section 3.04(b)(ii), if on or before Closing the Parties have not agreed upon the validity of any asserted Title Defect or have not agreed on the Title Defect Value attributable thereto, either Party shall have the right to elect to have the validity of such Title Defect and/or such Title Defect Value determined by an Independent Expert pursuant to Section 16.03; provided that if the validity of any asserted Title Defect, or the Title Defect Value attributable thereto, is not determined before Closing, the affected Asset shall be excluded from the sale and the Purchase Price shall be reduced by the Allocated Value of such affected Asset as set forth on Exhibit C. Upon resolution of such dispute, the Allocated Value of that Asset less the Title Defect Value, if any, found to be attributable to such Title Defect shall, subject to this Section 3.05, be paid by Buyer to Seller and the Asset conveyed to Buyer, if that is part of the mutually agreed settlement. (c) Notwithstanding anything to the contrary in this Agreement, (i) if the value of a given individual Title Defect (or individual Title Benefit (as defined in Section 3.09(a)) does not exceed $50,000 then no adjustment to the Purchase Price shall be made for such Title Defect (or Title Benefit), (ii) if the aggregate adjustment to the Purchase Price determined in accordance with this Agreement for Title Defects and Environmental Defects (as hereinafter defined) does not exceed three percent (3%) of the Purchase Price prior to any adjustments thereto, then no adjustment of the Purchase Price shall be made therefor and (iii) if the aggregate adjustment to the Purchase Price determined in accordance with this Agreement for Title Defects and Environmental Defects does exceed three percent (3%) of the Purchase Price prior to any adjustments thereto, then the Purchase Price shall only be adjusted by the amount of such excess.

  • Notice of Material Breach and Intent to Exclude The parties agree that a material breach of this CIA by Indivior constitutes an independent basis for Indivior’s exclusion from participation in the Federal health care programs. The length of the exclusion shall be in OIG’s discretion, but not more than five years per material breach. Upon a determination by OIG that Indivior has materially breached this CIA and that exclusion is the appropriate remedy, OIG shall notify Indivior of: (a) Indivior’s material breach; and (b) OIG’s intent to exercise its contractual right to impose exclusion (this notification is hereinafter referred to as the “Notice of Material Breach and Intent to Exclude”).

  • Environmental Defects If Buyer determines that with respect to the Asset there exists an Environmental Condition (other than with respect to asbestos, asbestos containing materials, or NORM, and excluding any matter set forth on Schedule 6.10) (in each case, an “Environmental Defect”), then on or prior to the Defect Claim Date, Buyer may give Seller a written notice of such Environmental Defect that sets forth the information required by this Section 3.17 (an “Environmental Defect Notice”). For all purposes of this Agreement and notwithstanding anything herein to the contrary, Buyer shall be deemed to have waived any Environmental Defect that Buyer fails to timely and properly assert as an Environmental Defect by an Environmental Defect Notice received by Seller on or before the Defect Claim Date. To be effective, an Environmental Defect Notice must set forth (a) a clear description of the matter constituting the alleged Environmental Defect, (b) a description of each Asset (or portion thereof) affected by the alleged Environmental Defect, (c) the estimated proportionate share attributable to the Assets of the estimated Lowest Cost Response to eliminate the alleged Environmental Defect (the “Environmental Defect Amount”), and (d) supporting documents and reasonably necessary for Seller to verify the existence of the alleged Environmental Defect and the Environmental Defect Amount. Buyer shall furnish Seller, on or before the end of each calendar week prior to the Defect Claim Date, Environmental Defect Notices with respect to any Environmental Defects that any of Buyer’s or any of its Affiliate’s employees, representatives, attorneys, or other environmental personnel or contractors discover or become aware of during the preceding calendar week, which notice may be preliminary in nature and supplemented prior to the Defect Claim Date; provided that notwithstanding this sentence, any Environmental Defect Notice shall be deemed timely if received by Seller prior to the Defect Claim Date.

  • Correction of Defects 35.1 The Engineer shall give notice to the Contractor of any Defects before the end of the Defects Liability Period, which begins at Completion and is defined in the Contract Data. The Defects Liability Period shall be extended for as long as Defects remain to be corrected. 35.2 Every time notice of a Defect is given, the Contractor shall correct the notified Defect within the length of time specified by the Engineer’s notice.

  • Inspection and Rejection of Nonconforming Goods The Buyer has the right to inspect the Goods on or after the Delivery Date. Buyer, at its sole option, may inspect all or a sample of the Goods, and may reject all or any portion of the Goods if it determines the Goods are nonconforming or defective. If Buyer rejects any portion of the Goods, Buyer has the right, effective upon written notice to Seller, to: (a) rescind the Order in its entirety; (b) accept the Goods at a reasonably reduced price; or (c) reject the Goods and require replacement of the rejected Goods. If Buyer requires replacement of the Goods, Seller shall, at its expense, promptly replace the nonconforming Goods and pay for all related expenses, including, but not limited to, transportation charges for the return of the defective goods and the delivery of replacement Goods. If Seller fails to timely deliver replacement Goods, Buyer may replace them with goods from a third party and charge Seller the cost thereof and terminate this Order for cause pursuant to Section 19. Any inspection or other action by Buyer under this Section shall not reduce or otherwise affect Seller's obligations under the Order, and Buyer shall have the right to conduct further inspections after Seller has carried out its remedial actions.

  • Nonconforming Work 5.6.1 Rejection, Removal and Replacement of Nonconforming Work

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!