SAFETY AND WORKER PROTECTION Sample Clauses

SAFETY AND WORKER PROTECTION. 5.1 The Vendor shall be responsible for initiating, maintaining, and supervising all safety precautions and programs in connection with the work. The Vendor shall take all necessary precautions for the safety of the workers and the public, and shall provide the necessary protection to prevent damages, injury, or loss to: A. All employees on the worksite and other persons who may be affected thereby. B. All work, materials, and/or equipment to be incorporated therein, whether in storage on or offsite. C. Other property at the site and/or adjacent thereto, including trees, lawn, walkways, pavements, roadways, structures, and utilities. D. The Vendor shall assume full liability for compliance with all federal, state, and local regulations pertaining to the protection of workers and persons occupying adjacent Turnpike property. E. The safety or protection of person(s), or work, or property at the site or adjacent thereto, the Vendor, without special instruction or authorization from the Contract Manager, is obligated to act to prevent threatened damages, injury or loss. The Vendor shall immediately report such incidents to the Contract Manager. F. The Vendor’s employees shall always wear safety glasses and vests with reflective stripes when working exposed to vehicular traffic or areas accessible by the public. Hard hats are to be used in areas of overhead hazards.
Sample 1
AutoNDA by SimpleDocs

Related to SAFETY AND WORKER PROTECTION

  • Safety and Protection Where applicable, the PERFORMING PARTY shall be responsible for requiring employees, contractors, and subcontractors to maintain and supervise all necessary safety precautions and programs in connection with the Grant Activities. The PERFORMING PARTY shall take all necessary precautions to protect the health and safety of the public during performance of the Grant Activities.

  • OCCUPATIONAL SAFETY AND HEALTH A. Consultant will perform the Services in compliance with the most current versions of all laws, standards, rules, and regulations of the Occupational Safety and Health Act, and all state and federal laws and regulations relating to safety and health standards. Consultant shall perform the Services in compliance with, will furnish only supplies, articles, and equipment that comply with such laws, standards, and regulations. B. Consultant shall immediately notify Valley Water in the event of any personal injury accident or occurrence occurring during the performance of the Services. Upon Valley Water’s request, Consultant shall provide Valley Water with documentation fully describing the accident and injury and the actions implemented to prevent similar occurrences.

  • SAFETY AND HEALTH 20.1 The Employer, employee and Union have a significant responsibility for workplace safety and health. A. The Employer will provide a work environment in accordance with safety and health standards established by the Washington Industrial Safety and Health Act (WISHA). B. Employees will comply with all safety and health practices and standards established by the Employer. C. The Union will work cooperatively with the Employer on safety and health related matters and encourage employees to work in a safe manner. 20.2 Employees will take an active role in creating a safe and healthy workplace by reporting immediate safety issues to their supervisor(s), following the chain of command, and other safety issues to their safety committee and/or safety officer for review and action, as necessary. Employees may additionally contact a Union xxxxxxx. The Employer will address reported unsafe working conditions and take appropriate action. All parties will comply with WAC 000-000-000 regarding unsafe work assignments and/or conditions that a reasonable person would conclude could create a real danger of death or serious injury. 20.3 The Employer will determine and provide the required safety devices, personal protective equipment and apparel, which employees will wear and/or use. The Employer will repair or replace employer provided safety items if out-of-date, or damaged/worn beyond usefulness in the normal course of business. The Employer will provide employees with orientation and/or training to perform their jobs safely. In addition, if necessary, training will be provided to employees on the safe operation of equipment prior to use. 20.4 The Employer will form a joint safety committee, in accordance with WISHA requirements, at each work location where there are eleven (11) or more employees. Meetings will be conducted in accordance with WAC 000-000-00000. The committee will be known as the Safety and Health Committee. The committee will consider workplace safety and health issues affecting employees. Employee participation in joint safety committee meetings held during the employee’s work time will be considered time worked. Employees may request work schedule adjustments to participate. No overtime or compensatory time will be paid as a result of participation in joint safety committee meetings held during the employee’s non-work hours. Any employee has the right to bring a workplace health and safety concern to the joint safety committee. Committee recommendations will be forwarded to the appropriate appointing authority for review and action, as necessary.

  • Xxxx Protection 1With respect to the Parties' rights and obligations under this Framework Agreement, the Parties agree that the Authority is the Data Controller and that the Supplier is the Data Processor.

  • Occupational Safety and Health Acts Contractor(s) who perform any work under this contract shall fully comply with the provisions of the Federal Occupational Safety and Health Act of 1970 and any amendments thereto and regulations pursuant to the act. Any Contractor who fails to do so may be terminated for cause as set forth below.

  • Data Protection Act 7.1 With respect to the parties' rights and obligations under this Contract, the parties agree that the Department is the Data Controller and that the Contractor is the Data Processor. 7.2 The Contractor shall: 7.2.1 Process the Personal Data only in accordance with instructions from the Department (which may be specific instructions or instructions of a general nature as set out in this Contract or as otherwise notified by the Department to the Contractor during the Term); 7.2.2 Process the Personal Data only to the extent, and in such manner, as is necessary for the provision of the Services or as is required by Law or any Regulatory Body; 7.2.3 The Contractor shall employ appropriate organisational, operational and technological processes and procedures to keep the Personal Data safe from unauthorised use or access, loss, destruction, theft or disclosure. The organisational, operational and technological processes and procedures adopted are required to comply with the requirements of ISO/IEC 27001 as appropriate to the services being provided to the Department; 7.2.4 Take reasonable steps to ensure the reliability of any Contractor Personnel who have access to the Personal Data; 7.2.5 Obtain prior written consent from the Department in order to transfer the Personal Data to any Sub-contractors or Affiliates for the provision of the Services; 7.2.6 Ensure that all Contractor Personnel required to access the Personal Data are informed of the confidential nature of the Personal Data and comply with the obligations set out in this clause 7; 7.2.7 Ensure that none of Contractor Personnel publish, disclose or divulge any of the Personal Data to any third party unless directed in writing to do so by the Department; 7.2.8 Notify the Department within five Working Days if it receives: a request from a Data Subject to have access to that person's Personal Data; or a complaint or request relating to the Department's obligations under the Data Protection Legislation; 7.2.9 Provide the Department with full cooperation and assistance in relation to any complaint or request made, including by: - providing the Department with full details of the complaint or request; - complying with a data access request within the relevant timescales set out in the Data Protection Legislation and in accordance with the Department's instructions; - providing the Department with any Personal Data it holds in relation to a Data Subject (within the timescales required by the Department); and - providing the Department with any information requested by the Department; 7.2.10 Permit the Department or the Department’s Representative (subject to reasonable and appropriate confidentiality undertakings), to inspect and audit the Contractor's data Processing activities (and/or those of its agents, subsidiaries and Sub-contractors) and comply with all reasonable requests or directions by the Department to enable the Department to verify and/or procure that the Contractor is in full compliance with its obligations under this Contract; 7.2.11 Provide a written description of the technical and organisational methods employed by the Contractor for processing Personal Data (within the timescales required by the Department) to be used solely for the purposes of this contract and provided that to do so would not be in breach of the Intellectual Property Rights (including Copyright) of a third party; and 7.2.12 Not process Personal Data outside the European Economic Area without the prior written consent of the Department and, where the Department consents to a transfer, to comply with: - the obligations of a Data Controller under the Eighth Data Protection Principle set out in Schedule 1 of the Data Protection Act 1998 by providing -an adequate level of protection to any Personal Data that is transferred; and - any reasonable instructions notified to it by the Department. 7.3 The Contractor shall comply at all times with the Data Protection Legislation and shall not perform its obligations under this Contract in such a way as to cause the Department to breach any of its applicable obligations under the Data Protection Legislation.

  • COMPLIANCE WITH OCCUPATIONAL SAFETY AND HEALTH By submission of a bid in response to this solicitation, the Bidder certifies that all material, equipment, etc., contained in their bid meets all OSHA requirements. Bidder further certifies that if they are the awarded Contractor, and the material, equipment, etc., delivered is subsequently found to be deficient in any OSHA requirements in effect on date of delivery, all costs necessary to bring the material, equipment, etc., into compliance with the aforementioned requirements shall be borne by the Contractor.

  • Occupational Health and Safety Act The Employer, the Union, and the Employees recognize they are bound by the provisions of the Occupational Health and Safety Act, S.N.S. 1996, c.7, and appropriate federal acts and regulations. Any breach of these obligations may be grieved pursuant to this Agreement.

  • System Protection To prevent compromise of systems which contain DSHS Data or through which that Data passes: a. Systems containing DSHS Data must have all security patches or hotfixes applied within 3 months of being made available. b. The Contractor will have a method of ensuring that the requisite patches and hotfixes have been applied within the required timeframes. c. Systems containing DSHS Data shall have an Anti-Malware application, if available, installed. d. Anti-Malware software shall be kept up to date. The product, its anti-virus engine, and any malware database the system uses, will be no more than one update behind current.

  • Federal Occupational Safety and Health Law Contractor represents and warrants that all articles and services shall meet or exceed the safety standards established and promulgated under the Federal Occupational Safety and Health Act of 1970, as amended (29 U.S.C. Chapter 15).

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!