Delivery of Products 4.1 The Supplier shall ensure that: (a) Products are properly packed and secured in such manner as to enable them to reach their destination in good condition; (b) each delivery of Products is accompanied by a delivery note which shows the date of the Order, the Order number (if any), the type and quantity of Products (including the code number of the Products, where applicable), special storage instructions (if any) and, if the Products are being delivered in instalments, the outstanding balance of Products remaining to be delivered; and (c) it states clearly on the delivery note any requirement for Ornua to return any packaging material for the Products to the Supplier. Any such packaging material shall only be returned to the Supplier at the cost of the Supplier. 4.2 The Supplier shall deliver the Products: (a) to the location set out in the Order or such other location as the parties may agree which may include delivery to a carrier (Delivery Location); and (b) on the date specified in the Order or, if no such date is specified, on a date agreed with Ornua in advance (Delivery Date). Delivery shall be on a Business Day during normal business hours, unless agreed otherwise with Ornua or otherwise instructed by Ornua. 4.3 Delivery of Products shall be completed when the Supplier unloads and stacks the Products at the Delivery Location, unless different delivery terms (or Incoterms®) are specified in the Order. 4.4 Ornua operates a “Just-in-Time” delivery system. Time shall be of the essence in relation to the Delivery Date and any agreed delivery time. If the Products are not delivered on time by the Supplier, clause 6.1 shall apply. 4.5 If the Supplier delivers more that the quantity of Products ordered, Ornua shall not be bound to pay for the excess and any excess shall be and shall remain at the Supplier’s risk and shall be returnable at the Supplier’s expense. 4.6 The Supplier shall not deliver Products in instalments without Ornua's prior written consent. Where it is agreed that Products are to be delivered in instalments, they may be invoiced and paid for separately. Failure by the Supplier to deliver any one instalment on time or at all or any defect in an instalment shall entitle Ornua to the remedies set out in clause 6.1. 4.7 Title and risk in the Products shall pass to Ornua on completion of delivery.
DELIVERY OF DOCUMENTS TO THE ADVISER The Sub-Adviser has furnished, and in the future will furnish, the Adviser with true, correct and complete copies of each of the following documents: (a) The Sub-Adviser's most recent Form ADV; (b) The Sub-Adviser's most recent balance sheet; and (c) The current Code of Ethics of the Sub-Adviser, adopted pursuant to Rule 17j-1 under the 1940 Act, and annual certifications regarding compliance with such Code. In addition, the Sub-Adviser will furnish the Adviser with (i) a summary of the results of any future examination of the Sub-Adviser by the Commission or other regulatory agency with respect to the Sub-Adviser's activities hereunder; and (ii) copies of its policies and procedures adopted pursuant to Rule 206(4)-7 under the Advisers Act. The Sub-Adviser will furnish the Adviser with all such documents as soon as practicable after such documents become available to the Sub-Adviser, to the extent that such documents have been changed materially. The Sub-Adviser shall furnish the Adviser with any further documents, materials or information as the Adviser may reasonably request in connection with Sub-Adviser's performance of its duties under this Agreement, including, but not limited to, information regarding the Sub-Adviser's financial condition, level of insurance coverage and any certifications or sub-certifications which may reasonably be requested in connection with Fund registration statements, Form N-CSR filings or other regulatory filings, and which are appropriately limited to Sub-Adviser's responsibilities under this Agreement.
Delivery of Materials In the event of any expiration or termination of this Agreement, Contractor shall promptly provide the JBE with all originals and copies of the Deliverables, including any partially-completed Deliverables-related work product or materials, and any JBE-provided materials in its possession, custody, or control. In the event of any termination of this Agreement, the JBE shall not be liable to Contractor for compensation or damages incurred as a result of such termination; provided that if the JBE’s termination is not for cause, the JBE shall pay any fees due under this Agreement for Services performed or Deliverables completed and accepted as of the date of the JBE’s termination Notice.
Delivery of Software 1. SAP will deliver the Software as described in the Documentation and the Price List and will also provide the appropriate license key for the relevant End User. With regard to the features, quality and functionality of the Software the product description in the Documentation and the Price List is solely decisive. SAP does not own any additional features, quality or functionality. Distributor can, in particular, not assert any additional feature, quality or functionality from any public statements, publications or advertisements by SAP except to the extend SAP has expressly confirmed such additional feature, quality or functionality in writing. Any representation, warranty, undertaking or guarantee regarding additional features, quality or functionality is effective only if expressly confirmed by SAP’s management in writing. 2. After acceptance of an order, SAP will deliver to Distributor one copy of the relevant Software: a) on discs or other data media (“Physical Shipment”); or b) by making it available for downloading through the internet (usually on the SAP ServiceMarket Place (xxxx://xxxxxxx.xxx.xxx/swdc)) (“Electronic Delivery”). 3. The relevant Software and Documentation will be deemed delivered (including but not limited for the purpose of fixed delivery dates or timely delivery) and the risk passes to Distributor: a) in case of Physical Shipment, when the relevant disc or other data media thereof is handed over to the freight carrier (FCA - Free Carrier (named place of delivery), Incoterms 2010); or b) in case of Electronic Delivery, when SAP has made an electronic copy thereof available for downloading and has informed Distributor accordingly, (“Delivery”). 4. Upon Distributor’s request or if stipulate in the order, SAP may agree to provide Software and/or the appropriate license key directly to the relevant Open Ecosystem Partner instead (“Open Ecosystem Partner Delivery”). In case of Open Ecosystem Partner Delivery, the provisions set out in this Article 5 (Delivery of Software) will apply analogously; delivery to Distributor will be deemed to occur upon Delivery to the Open Ecosystem Partner. 5. Upon Distributor’s request or if stipulate in the order, SAP may agree to provide Software and/or the appropriate license key directly to the relevant End User instead (“End User Delivery”). In case of End User Delivery, the provisions set out in this Article 5 (Delivery of Software) will apply analogously; delivery to Distributor will be deemed to occur upon Delivery to the End User. 6. SAP might be entitled to suspend the delivery of the Software, Maintenance Services, applicable license key or both to Distributor, Open Ecosystem Partner or End User or both as further set out in this Sell On Premise Distribution Model as well as the Distribution GTCS. 7. If Distributor receives a new copy of the Software, Documentation and/or other SAP Materials that replaces previously provided Software, Documentation and/or other SAP Materials, Distributor must distribute that newest copy provided and either destroy or upon SAP’s request return previous copies. 8. Distributor must not make the Software, Documentation and/or other SAP Materials available to the Open Ecosystem Partner or End User by any means other than by delivering the Software, Documentation and/or other SAP Materials as originally provided by SAP. Distributor’s right to pass on the Software, Documentation and/or other SAP Materials is subject to the provisions of this Agreement.
Delivery of Services Axon personnel will work Monday through Friday, 8:30 a.m. to 5:30 p.m., except holidays. Axon will perform all on-site tasks over a consecutive timeframe. Axon will not charge Agency travel time by Axon personnel to Agency premises as work hours.
Delivery of Materials to Underwriters The Company will deliver to each of the several Underwriters, without charge and from time to time during the period when a prospectus is required to be delivered under the Act or the Exchange Act, such number of copies of each Statutory Prospectus, the Prospectus and all amendments and supplements to such documents as such Underwriters may reasonably request.
DELIVERY OF PUT NOTICES (I) Subject to the terms and conditions of the Equity Line Transaction Documents, and from time to time during the Open Period, the Company may, in its sole discretion, deliver a Put Notice to the Investor which states the dollar amount (designated in U.S. Dollars) (the "Put Amount"), which the Company intends to sell to the Investor on a Closing Date (the "Put"). The Put Notice shall be in the form attached hereto as Exhibit C and incorporated herein by reference. The amount that the Company shall be entitled to Put to the Investor (the "Put Amount") shall be equal to, at the Company's election, either: (A) Two Hundred percent (200%) of the average daily volume (U.S. market only) of the Common Stock for the Ten (10) Trading Days prior to the applicable Put Notice Date, multiplied by the average of the three (3) daily closing bid prices immediately preceding the Put Date, or (B) two hundred fifty thousand dollars ($250,000). During the Open Period, the Company shall not be entitled to submit a Put Notice until after the previous Closing has been completed. The Purchase Price for the Common Stock identified in the Put Notice shall be equal to ninety-three percent (93%) of the lowest Volume Weighted Average Price (VWAP) of the Common Stock during the Pricing Period.
Delivery of Prospectuses The Company has delivered to each Underwriter, without charge, as many copies of each preliminary prospectus as such Underwriter reasonably requested, and the Company hereby consents to the use of such copies for purposes permitted by the 1933 Act. The Company will furnish to each Underwriter, without charge, during the period when a prospectus relating to the Securities is (or, but for the exception afforded by Rule 172, would be) required to be delivered under the 1933 Act, such number of copies of the Prospectus (as amended or supplemented) as such Underwriter may reasonably request. The Prospectus and any amendments or supplements thereto furnished to the Underwriters will be identical to the electronically transmitted copies thereof filed with the Commission pursuant to XXXXX, except to the extent permitted by Regulation S-T.
Delivery of Product 11.1 Subject to Clause 25 (Capacity Constraints), GSK (or the Nominated Supplier) shall Deliver the Products on the date specified in the relevant Firm Order, provided that: (A) the quantity of Product Delivered by GSK may vary by [***] from the quantity specified in the relevant Firm Order; and (B) the date of Delivery may vary by [***] from the date specified in the relevant Firm Order, and such variance shall not constitute a breach of this Agreement by GSK or entitle the Purchaser to reject such Delivery. Delivery of Commercial API and Commercial Products shall take place following release by GSK of such Products in accordance with (and the extent required by) the Quality Agreement, provided that, for clarity, the Purchaser shall only be required to pay for the quantity of Product that is actually Delivered. 11.2 In respect of Commercial API, the Parties may agree that some or all of the quantities of such Commercial API Delivered pursuant to Clause 11.1 shall remain in the possession of GSK or its Affiliate on [***]. The Purchaser shall pay GSK a storage fee to cover any GSK costs and expenses incurred in connection with holding and storing such [***] stock (“Storage Fee”). The Storage Fee is set forth in Schedule 4 (Fees). For the avoidance of doubt, no Storage Fee is payable in respect of quantities of Commercial API required for the Manufacture of the Commercial Product shown in the Firm Zone and that are held by GSK at designated Manufacturing Site in respect of Commercial Product for the purposes of such Manufacture. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE DERMAVANT SCIENCES LTD. HAS DETERMINED THE INFORMATION (I) IS NOT MATERIAL AND (II) WOULD LIKELY CAUSE COMPETITIVE HARM TO DERMAVANT SCIENCES LTD. IF PUBLICLY DISCLOSED. 11.3 Subject to paragraph 2 of Schedule 3 (Toll Manufacturing Provisions), the risk in and title to the Commercial Products shall remain with GSK (or its Affiliate) until Delivered, at which point it shall pass to the Purchaser. Title to Commercial API shall pass to the Purchaser when such Commercial API is purchased by Purchaser, but risk in such Commercial API shall remain with GSK in accordance with Clause 8.5 for so long as such Commercial API is in GSK’s possession as Purchaser Materials. 11.4 Other than in respect of Commercial API that the Parties agree shall be retained by GSK on Consignment, the Purchaser shall collect the Products Delivered from the Manufacturing Site on the date of Delivery, or such date as GSK, the Nominated Supplier or the Nominated Manufacturer may notify to the Purchaser (provided that, and if the Delivery date notified to the Purchaser is earlier or later than the Delivery window contemplated by Clause 11.1, the Delivery date must be agreed with the Purchaser). Notwithstanding the foregoing, and without limiting Clause 20.2, Purchaser may, [***], elect to obtain Delivery at any point within [***] of the notified date of Delivery by providing notice to GSK of such revised Delivery date. 11.5 Commercial API that the Parties agree shall be retained by GSK [***] at the Manufacturing Site in respect of Commercial API shall be collected by the Purchaser from such Manufacturing Site on such date as may be agreed between the Parties. 11.6 For the avoidance of doubt, irrespective of whether or not any quantity of Commercial API is retained by GSK [***] for a period of time after Delivery, the Purchaser shall be responsible for the delivery of Toll Materials to the designated Manufacturing Site in respect of Commercial Product.
DELIVERY OF CALCULATIONS On or before November 1 of each year for which this Agreement is effective, the Third Party appointed pursuant to Section 4.3 of this Agreement shall forward to the Parties a certification containing the calculations required under this Article IV, Article V, Article VI, of this Agreement in sufficient detail to allow the Parties to understand the manner in which the calculations were made. The Third Party shall simultaneously submit his, her, or its invoice for fees for services rendered to the Parties, if any fees are being claimed, which fee shall be the sole responsibility of the District, but subject to the provisions of Section 4.8, below. Upon reasonable prior notice, the employees and agents of the Applicant shall have access, at all reasonable times, to the Third Party’s calculations, records, and correspondence pertaining to the calculation and fee for the purpose of verification. The Third Party shall maintain supporting data consistent with generally accepted accounting practices, and the employees and agents of the Applicant shall have the right to reproduce and retain for purpose of audit, any of these documents. The Third Party shall preserve all documents pertaining to the calculation until four (4) years after the Final Termination Date of this Agreement. The Applicant shall not be liable for any of the Third Party’s costs resulting from an audit of the Third Party’s books, records, correspondence, or work papers pertaining to the calculations contemplated by this Agreement.