Scrapping of Parts
Scrapping of Parts Sample Clauses
Related to Scrapping of Parts
Removal of parts The Borrower shall not remove any material part of the Ship, or any item of equipment installed on the Ship, unless the part or item so removed is forthwith replaced by a suitable part or item which is in the same condition as or better condition than the part or item removed, is free from any Security Interest or any right in favour of any person other than the Lender and becomes on installation on the Ship the property of the Borrower and subject to the security constituted by the Mortgage Provided that the Borrower may install equipment owned by a third party if the equipment can be removed without any risk of damage to the Ship.
Pooling of Parts Any Part removed from the Airframe or any Engine as provided in Section 7.04(a) may be subjected by the Company or a Person permitted to be in possession of the Aircraft to a pooling arrangement customary in the airline industry entered into in the ordinary course of the Company’s or such Person’s business; provided that the part replacing such removed Part shall be incorporated or installed in or attached to the Airframe or such Engine in accordance with Section 7.04(a) as promptly as practicable after the removal of such removed Part. In addition, any replacement Part when incorporated or installed in or attached to the Airframe or any Engine may be owned by any third party subject to such a pooling arrangement; provided that the Company, at its expense, as promptly thereafter as practicable, either (i) causes title to such replacement Part to vest in the Company free and clear of all Liens (except Permitted Liens), or (ii) replaces such replacement Part by incorporating or installing in or attaching to the Airframe or such Engine a further replacement Part in the manner contemplated by Section 7.04(a).
Replacement of Parts Except as otherwise provided herein, so long as the Airframe or Engine is subject to the Lien of this Indenture, Owner, at its own cost and expense, will, or will cause a Permitted Lessee to, at its own cost and expense, promptly replace (or cause to be replaced) all Parts which may from time to time be incorporated or installed in or attached to the Aircraft, Airframe or any Engine and which may from time to time become worn out, lost, stolen, destroyed, seized, confiscated, damaged beyond repair or permanently rendered unfit for use for any reason whatsoever. In addition, Owner may, at its own cost and expense, or may permit a Permitted Lessee at its own cost and expense to, remove (or cause to be removed) in the ordinary course of maintenance, service, repair, overhaul or testing any Parts, whether or not worn out, lost, stolen, destroyed, seized, confiscated, damaged beyond repair or permanently rendered unfit for use; provided, however, that Owner, except as otherwise provided herein, at its own cost and expense, will, or will cause a Permitted Lessee at its own cost and expense to, replace such Parts as promptly as practicable. All replacement parts shall be free and clear of all Liens, except for Permitted Liens and pooling arrangements to the extent permitted by Section 4.04(c) below (and except in the case of replacement property temporarily installed on an emergency basis) and shall be in good operating condition and have a value and utility not less than the value and utility of the Parts replaced (assuming such replaced Parts were in the condition required hereunder).
Testing of Metering Equipment Connecting Transmission Owner shall inspect and test all of its Metering Equipment upon installation and at least once every two (2) years thereafter. If requested to do so by NYISO or Developer, Connecting Transmission Owner shall, at Developer’s expense, inspect or test Metering Equipment more frequently than every two (2) years. Connecting Transmission Owner shall give reasonable notice of the time when any inspection or test shall take place, and Developer and NYISO may have representatives present at the test or inspection. If at any time Metering Equipment is found to be inaccurate or defective, it shall be adjusted, repaired or replaced at Developer’s expense, in order to provide accurate metering, unless the inaccuracy or defect is due to Connecting Transmission Owner’s failure to maintain, then Connecting Transmission Owner shall pay. If Metering Equipment fails to register, or if the measurement made by Metering Equipment during a test varies by more than two percent from the measurement made by the standard meter used in the test, Connecting Transmission Owner shall adjust the measurements by correcting all measurements for the period during which Metering Equipment was in error by using Developer’s check meters, if installed. If no such check meters are installed or if the period cannot be reasonably ascertained, the adjustment shall be for the period immediately preceding the test of the Metering Equipment equal to one-half the time from the date of the last previous test of the Metering Equipment. The NYISO shall reserve the right to review all associated metering equipment installation on the Developer’s or Connecting Transmission Owner’s property at any time.
Use of Partially Constructed Roads Unless Contracting Officer determines that there is justification under existing conditions and ground conditions permit hauling without undue damage, portions of Specified Roads shall be Substantially Completed prior to their use for hauling timber. When necessary to facilitate construction and protect bridges and roads from damage, timber felled in construction and timber logged directly to the road from areas immediately adjacent thereto may be hauled before road construction is Substantially Completed. Such hauling shall be confined to periods when abnormal soil erosion and damage to National Forest lands will not result.
Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.
Separation of Components The SOFTWARE PRODUCT is licensed as a single product. Its component parts may not be separated for use on more than one computer.
Cancellation or reduction for convenience 20.1 The Commonwealth may cancel or reduce the scope of this Agreement by notice, due to: (a) a change in government policy; or (b) a Change in the Control of the Grantee which the Commonwealth reasonably believes will negatively affect the Grantee’s ability to comply with this Agreement. 20.2 On receipt of a notice of reduction or cancellation under this clause, the Grantee agrees to: (a) stop or reduce the performance of the Grantee's obligations as specified in the notice; and (b) take all available steps to minimise loss resulting from that reduction or cancellation; and (c) continue performing any part of the Activity or the Agreement not affected by the notice if requested to do so by the Commonwealth; (d) report on, and return any part of the Grant to the Commonwealth, or otherwise deal with the Grant, as directed by the Commonwealth. 20.3 In the event of reduction or cancellation under this clause, the Commonwealth will be liable only to: (a) pay any part of the Grant due and owing to the Grantee under this Agreement at the date of the notice; and (b) reimburse any reasonable and substantiated expenses the Grantee unavoidably incurs that relate directly and entirely to the reduction in scope or cancellation of the Agreement. 20.4 In the event of reduction, the amount of the Grant will be reduced in proportion to the reduction in the scope of the Agreement. 20.5 The Commonwealth’s liability to pay any amount under this clause is: (a) subject to the Grantee's compliance with this Agreement; and (b) limited to an amount that when added to all other amounts already paid under the Agreement will not exceed the total amount of the Grant. 20.6 The Grantee will not be entitled to compensation for loss of prospective profits or benefits that would have been conferred on the Grantee but for the cancellation or reduction in scope of the Agreement under clause 20.1. 20.7 The Commonwealth will act reasonably in exercising its rights under this clause.
Installation of Equipment You represent that there are no legal, contractual or similar restrictions on the installation of the Equipment in the location(s) you have authorized. It is your responsibility to ensure compliance with all applicable building codes, zoning ordinances, homeowners’ association rules, covenants, conditions, and restrictions related to the Service, to pay any fees or other charges, and to obtain any permits or authorizations necessary for the installation or use of the Service (collectively "Legal Requirements"). You are solely responsible for any fines or similar charges for violation of any applicable Legal Requirements. You acknowledge and agree that Viasat or its designated service provider will be required to access your premises and computer to install and maintain the Equipment, including, without limitation, the antenna and its components. Standard Equipment installations performed by Viasat-authorized installers include: (i) installation of the antenna to an outside wall or sloped roof; (ii) travel to and from your Service location within 50 miles of the installer’s office; (iii) cable routed through one exterior wall and one interior wall or floor; (iv) connection of the antenna to the modem using up to 150 feet of cable; (v) connection of the modem to one computer using up to 7 feet of cable; and (vi) required mounting and cabling hardware. Any different or additional installation services or hardware are non-standard and may result in additional charges to be agreed upon between you and the installer. All installations include attaching the Equipment to your computer, installing software on your computer and configuring your computer to optimize the performance of the Internet Service. You confirm that you have reviewed the installation plan and agreed to any associated charges. If you approved a roof mount, you acknowledge the potential risks associated with this type of installation (including, without limitation, with respect to any warranty that applies to your roof or roof membrane). By signing this Agreement, scheduling one or more service or installation visits, and permitting us or our service provider to enter your home, you are authorizing Viasat and its service provider to perform all of the above actions. You are responsible for backing up the data on your computer and we highly recommend that you do so prior to permitting access to us or one of our designated service providers. NEITHER VIASAT NOR ITS SERVICE PROVIDER SHALL HAVE ANY LIABILITY WHATSOEVER FOR ANY LOSSES RESULTING FROM THE EQUIPMENT OR ANY INSTALLATION, REPAIR OR OTHER SERVICES ASSOCIATED WITH THE EQUIPMENT, INCLUDING WITHOUT LIMITATION, DAMAGE TO YOUR PREMISES OR LOSS OF SOFTWARE, DATA OR OTHER INFORMATION FROM YOUR COMPUTER. This limitation does not apply to any damages arising from the gross negligence or willful misconduct of us or one of our designated service providers. Time frames for installation, if any, are not guaranteed and may vary depending on the types of services requested and other factors.
No Moving of Supplied Furnishings All furnishings and equipment supplied with the Room shall remain in the Room for the duration of the Term. All furnishings, if rearranged, must be returned to their original position found at the commencement of the Term. No common area furniture is to be moved into the Room.
