Marking of Licensed Products To the extent commercially feasible and consistent with prevailing business practices, Company shall xxxx, and shall cause its Affiliates and Sublicensees to xxxx, all Licensed Products that are manufactured or sold under this Agreement with the number of each issued patent under the Patent Rights that applies to such Licensed Product.
Third Party Proprietary Data The Disclosing Party's Third Party Proprietary Data, if any, will be identified in a separate technical document.
Termination of Licenses Subject to Clause 33.3 (Licence granted by the Supplier: Supplier Background IPR), all licences granted pursuant to Clause 33 (Intellectual Property Rights) (other than those granted pursuant to Clause 33.6 (Third Party IPR) and 33.7 (Licence granted by the Customer)) shall survive the Call Off Expiry Date. The Supplier shall, if requested by the Customer in accordance with Call Off Schedule 9 (Exit Management), grant (or procure the grant) to the Replacement Supplier of a licence to use any Supplier Background IPR and/or Third Party IPR on terms equivalent to those set out in Clause 33.3 (Licence granted by the Supplier: Supplier Background IPR) subject to the Replacement Supplier entering into reasonable confidentiality undertakings with the Supplier. The licence granted pursuant to Clause 33.7 (Licence granted by the Customer ) and any sub-licence granted by the Supplier in accordance with Clause 33.7.1 (Licence granted by the Customer) shall terminate automatically on the Call Off Expiry Date and the Supplier shall: immediately cease all use of the Customer Background IPR and the Customer Data (as the case may be); at the discretion of the Customer, return or destroy documents and other tangible materials that contain any of the Customer Background IPR and the Customer Data, provided that if the Customer has not made an election within six months of the termination of the licence, the Supplier may destroy the documents and other tangible materials that contain any of the Customer Background IPR and the Customer Data (as the case may be); and ensure, so far as reasonably practicable, that any Customer Background IPR and Customer Data that are held in electronic, digital or other machine-readable form ceases to be readily accessible from any computer, word processor, voicemail system or any other device of the Supplier containing such Customer Background IPR and/or Customer Data. The Supplier shall, during and after the Call Off Contract Period, on written demand, indemnify the Customer against all Losses incurred by, awarded against, or agreed to be paid by the Customer (whether before or after the making of the demand pursuant to the indemnity hereunder) arising from an IPR Claim. If an IPR Claim is made, or the Supplier anticipates that an IPR Claim might be made, the Supplier may, at its own expense and sole option, either: procure for the Customer the right to continue using the relevant item which is subject to the IPR Claim; or replace or modify the relevant item with non-infringing substitutes provided that: the performance and functionality of the replaced or modified item is at least equivalent to the performance and functionality of the original item; the replaced or modified item does not have an adverse effect on any other Goods and/or Services; there is no additional cost to the Customer; and the terms and conditions of this Call Off Contract shall apply to the replaced or modified Goods and/or Services. If the Supplier elects to procure a licence in accordance with Clause 33.9.2(a) or to modify or replace an item pursuant to Clause 33.9.2(b), but this has not avoided or resolved the IPR Claim, then: the Customer may terminate this Call Off Contract by written notice with immediate effect; and without prejudice to the indemnity set out in Clause 33.9.1, the Supplier shall be liable for all reasonable and unavoidable costs of the substitute goods and/or services including the additional costs of procuring, implementing and maintaining the substitute items.
License Type Your license to a Product will be under a Named User or CPU license type, as specified on an order. Each Named User license to a Product entitles a Named User to access and use that Product in one production environment and up to two non-production environments. Each CPU license to a Product entitles you to assign the Product to a single CPU in one production environment and up to two non-production environments, for use in support of an unspecified number of Named Users.
Monopolies and Exclusive Service Suppliers 1. Each Party shall ensure that any monopoly supplier of a service in its territory does not, in the supply of the monopoly service in the relevant market, act in a manner inconsistent with that Party's Schedule of specific commitments. 2. Where a Party's monopoly supplier competes, either directly or through an affiliated company, in the supply of a service outside the scope of its monopoly rights and which is subject to that Party's Schedule of specific commitments, the Party shall ensure that such a supplier does not abuse its monopoly position to act in its territory in a manner inconsistent with such commitments. 3. If a Party has reason to believe that a monopoly supplier of a service of the other Party is acting in a manner inconsistent with paragraphs 1 or 2 above, it may request that Party establishing, maintaining or authorising such supplier to provide specific information concerning the relevant operations. 4. The provisions of this Article shall also apply to cases of exclusive service suppliers, where a Party, formally or in effect: (a) authorises or establishes a small number of service suppliers; and (b) substantially prevents competition among those suppliers in its territory.
DEVELOPMENT OR ASSISTANCE IN DEVELOPMENT OF SPECIFICATIONS REQUIREMENTS/ STATEMENTS OF WORK
License Types (a) A Team License shall mean a subscription license that provides a limited number of licenses to a set amount of developers for a named Customer. Customer must procure enough active licenses for each individual who has Programmatic Access. A Team License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. A Team License cannot be used as a floating license. (b) A Project License shall mean a subscription license which covers one named Customer application. The license fees are based on the total number of developers working on a named project, regardless of whether such developers are directly using the Licensed Product. For the purposes of pricing and license administration, a “Project Group” is deemed to be a distinct Customer software team within a Customer’s business unit that works towards a distinct business purpose for the benefit of a single application. Customer is required to identify the name of each such Project Group to Syncfusion; such name must be unambiguous in nature. It is acknowledged and agreed by Customer that each identified Project Group shall exist for a valid business purpose and not just as a means for consolidating software licenses to minimize license fees that are otherwise due. If, in the sole opinion of Syncfusion, multiple Customer teams would each individually meet the above definition of a Project Group, such multiple teams shall not be combined for the purpose of consolidating licenses under a single Project Group. Customer is responsible for providing information about each such Project Group to Syncfusion. By entering into this Agreement, Customer represents that after the effective date, it will not withhold information that Syncfusion requires to properly license each such Project Group, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (c) A Division License shall mean a subscription license which will cover one named Division and allow for development work on more than one project within such Division. A Division shall mean a business unit within Customer’s organization that works towards a distinct business purpose. Customer is required to identify the name of such Division to Syncfusion; such name must be unambiguous in nature. License fee determinations will be at the sole discretion of Syncfusion and be based on such factors including, but not limited to, Customer’s Division size, developer count, and the scope of the Division’s business purpose. By entering into this Agreement, Customer acknowledges that it is responsible for providing information about the named Customer Division to Syncfusion sufficient for Syncfusion to price the Division License, and Customer represents that it will not withhold information that Syncfusion requires to properly license each such named Customer division, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (d) A Global License shall mean a subscription license for all development for a named Customer, where the license fees are based on the overall size of a named Customer. A Global License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. (e) A Retail License shall mean a single named user, non-transferable license to use the Licensed Product. Retail Licenses will only made available to Customers in Syncfusion’s sole discretion and only when the number of such End-Users is finite and readily ascertainable. Accordingly, Syncfusion will make a determination as to whether or not the provision of Retail Licenses is appropriate under the circumstances applicable to any given Customer, and Syncfusion reserves the right, in its sole discretion, to refuse to make available Retail Licenses to a Customer and instead require a given Customer to procure a Project License, Division License, or Global License as circumstances dictate. A Retail License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.
Third Party Products and Services Any third-party hardware, software and/or services that is delivered by ResMed for use either standalone or in conjunction with ResMed products and/or services, shall be subject to the third-party terms and conditions and/or license agreements between Customer and the third party. Such third-party hardware, software and/or services is provided by ResMed "AS IS," without any warranty of any kind. Any representations or warranties as to such hardware, software and/or services shall only be as granted by the applicable third parties, if any, that accompany such products and/or software and/or services. Any representations, warranties, or other similar obligations with respect to such third-party hardware, software and/or services flow directly from the third party to Customer and ResMed shall have no responsibility at all for any such representations, warranties, obligations or lack thereof.
Xxxxx of License Georgia Institute of Technology shall grant the Student a limited, nonexclusive, nontransferable and revocable license to use and occupy an assigned space in a Georgia Institute of Technology facility in accordance with the terms and conditions of this Contract (the “License”). The parties to this Contract do not intend that an estate, a tenancy or any other interest in property should pass from Georgia Institute of Technology to Student. Instead, it is the intention of the parties that the relationship between Georgia Institute of Technology and Student be that of licensor and licensee and the sole right of Student to use the assigned space as a living unit shall be based upon the License granted in this Contract.
Termination of License 3.2.1 The Bank shall have, in the event of the Customer’s breach of or default under this Agreement and/ or the Bank being of the view that the Customer is not co-operating and/or complying with the terms and conditions of this Agreement, a right to terminate this Agreement and the license granted hereunder, after issuing to the Customer a prior written notice of not less than 3 (three) months by registered post or speed post (and also by (i) email where email id of the Customer is available; and (ii) SMS and/or WhatsApp where the mobile phone number of the Customer is available) (“Termination Notice”). 3.2.2 Upon receipt of the Termination Notice, the Licensor shall forthwith and before the end of the notice period stipulated under the Termination Notice surrender and vacate the Locker and handover the keys, password or any other identification mechanism and documents provided by the Bank for opening of the Locker, to the Bank.