Common use of Service Use Clause in Contracts

Service Use. 6.1 Each ISDN2 supports 2 channels on one physical line. 6.2 Each ISDN30 supports up to 30 channels but a minimum of 8 are required. 6.3 The CLI display feature will present the caller numbers if the Calling Line Identity is not withheld. 6.4 DDI numbers are only available for ISDN30 and multiple ISDN2s. 6.5 DDI Planning incurs a onetime charge – the charge is available in the Landline Telephony Services Line Rental Price List. 6.6 DDI is not available at all exchanges. 6.7 Direct Dialling In (DDI) allows end-customers to control their own numbering and receipt of calls. A group of Digital channels can have up to 5 DDI number ranges allocated on the same installation. Each DDI number range would provide a continuous sequence of a minimum 10 DDI numbers. 6.8 Digits to Switch allows end Customers to programme CPE with part or all of their Directory number, so incoming calls can be routed to the correct piece of terminal equipment. The default is 6 digits and the maximum is 11.

Appears in 7 contracts

Samples: Master Service Agreement, Master Service Agreement, Master Service Agreement

AutoNDA by SimpleDocs

Service Use. 6.1 Each ISDN2 supports 2 channels on one physical line. 6.2 Each ISDN30 supports up to 30 channels but a minimum of 8 are required. 6.3 The CLI display feature will present the caller numbers if the Calling Line Identity is not withheld. 6.4 DDI numbers are only available for ISDN30 and multiple ISDN2s. 6.5 DDI Planning incurs a onetime charge – the charge is available in the Landline Telephony Services Wholesale Line Rental Price List. 6.6 DDI is not available at all exchanges. 6.7 Direct Dialling In (DDI) allows end-customers to control their own numbering and receipt of calls. A group of Digital channels can have up to 5 DDI number ranges allocated on the same installation. Each DDI number range would provide a continuous sequence of a minimum 10 DDI numbers. 6.8 Digits to Switch allows end Customers to programme CPE with part or all of their Directory number, so incoming calls can be routed to the correct piece of terminal equipment. The default is 6 digits and the maximum is 11.

Appears in 5 contracts

Samples: Master Service Agreement, Master Service Agreement, Master Service Agreement

Service Use. 6.1 Each ISDN2 supports 2 channels on one physical line. 6.2 Each ISDN30 supports up to 30 channels but a minimum of 8 are required. 6.3 The CLI display feature will present the caller numbers if the Calling Line Identity is not withheld. 6.4 DDI numbers are only available for ISDN30 and multiple ISDN2s. 6.5 DDI Planning incurs a onetime charge – the charge is available in the Landline Telephony Services Line Rental Voip-Unlimited’s Price List.list and Tariffs.. 6.6 DDI is not available at all exchanges. 6.7 Direct Dialling In (DDI) allows end-customers Resellers to control their own numbering and receipt of calls. A group of Digital channels can have up to 5 DDI number ranges allocated on the same installation. Each DDI number range would provide a continuous sequence of a minimum 10 DDI numbers. 6.8 Digits to Switch allows end Customers Resellers to programme CPE with part or all of their Directory number, so incoming calls can be routed to the correct piece of terminal equipment. The default is 6 digits and the maximum is 11.

Appears in 4 contracts

Samples: Master Services Agreement, Master Services Agreement, Master Services Agreement

Service Use. 6.1 Each ISDN2 supports 2 channels on one physical line. 6.2 Each ISDN30 supports up to 30 channels but a minimum of 8 are required. 6.3 The CLI display feature will present the caller numbers if the Calling Line Identity is not withheld. 6.4 DDI numbers are only available for ISDN30 and multiple ISDN2s. 6.5 DDI Planning incurs a onetime charge – the charge is available in the Landline Telephony Services Line Rental Voip Unlimited’s Price List.list and Tariffs.. 6.6 DDI is not available at all exchanges. 6.7 Direct Dialling In (DDI) allows end-customers End Users to control their own numbering and receipt of calls. A group of Digital channels can have up to 5 DDI number ranges allocated on the same installation. Each DDI number range would provide a continuous sequence of a minimum 10 DDI numbers. 6.8 Digits to Switch allows end Customers End Users to programme CPE with part or all of their Directory number, so incoming calls can be routed to the correct piece of terminal equipment. The default is 6 digits and the maximum is 11.

Appears in 3 contracts

Samples: Master Service Agreement, Master Service Agreement, Master Service Agreement

Service Use. 6.1 Each ISDN2 supports 2 channels on one physical line. 6.2 Each ISDN30 supports up to 30 channels but a minimum of 8 are required. 6.3 The CLI display feature will present the caller numbers if the Calling Line Identity is not withheld. 6.4 DDI numbers are only available for ISDN30 and multiple ISDN2s. 6.5 DDI Planning incurs a onetime charge – the ±the charge is available in the Landline Telephony Services Line Rental Price List. 6.6 DDI is not available at all exchanges. 6.7 Direct Dialling In (DDI) allows end-customers to control their own numbering and receipt of calls. A group of Digital channels can have up to 5 DDI number ranges allocated on the same installation. Each DDI number range would provide a continuous sequence of a minimum 10 DDI numbers. 6.8 Digits to Switch allows end Customers to programme CPE with part or all of their Directory number, so incoming calls can be routed to the correct piece of terminal equipment. The default is 6 digits and the maximum is 11.

Appears in 1 contract

Samples: Master Service Agreement

AutoNDA by SimpleDocs

Service Use. 6.1 Each ISDN2 supports 2 channels on one physical line. 6.2 Each ISDN30 supports up to 30 channels but a minimum of 8 are required. 6.3 The CLI display feature will present the caller numbers if the Calling Line Identity is not withheld. 6.4 DDI numbers are only available for ISDN30 and multiple ISDN2s. 6.5 DDI Planning incurs a onetime charge – the charge is available in the Landline Telephony Services Line Rental Voip Unlimited’s Price List.list and Tariffs.. 6.6 DDI is not available at all exchanges. 6.7 Direct Dialling In (DDI) allows end-customers Resellers to control their own numbering and receipt of calls. A group of Digital channels can have up to 5 DDI number ranges allocated on the same installation. Each DDI number range would provide a continuous sequence of a minimum 10 DDI numbers. 6.8 Digits to Switch allows end Customers Resellers to programme CPE with part or all of their Directory number, so incoming calls can be routed to the correct piece of terminal equipment. The default is 6 digits and the maximum is 11.

Appears in 1 contract

Samples: Master Services Agreement

Service Use. 6.1 Each ISDN2 supports 2 channels on one physical line. 6.2 Each ISDN30 supports up to 30 channels but a minimum of 8 are required. 6.3 The CLI display feature will present the caller numbers if the Calling Line Identity is not withheld. 6.4 DDI numbers are only available for ISDN30 and multiple ISDN2s. 6.5 DDI Planning incurs a onetime charge – the charge is available in the Landline Telephony Services Line Rental Voip-Unlimited’s Price List.list and Tariffs.. 6.6 DDI is not available at all exchanges. 6.7 Direct Dialling In (DDI) allows end-customers End Users to control their own numbering and receipt of calls. A group of Digital channels can have up to 5 DDI number ranges allocated on the same installation. Each DDI number range would provide a continuous sequence of a minimum 10 DDI numbers. 6.8 Digits to Switch allows end Customers End Users to programme CPE with part or all of their Directory number, so incoming calls can be routed to the correct piece of terminal equipment. The default is 6 digits and the maximum is 11.

Appears in 1 contract

Samples: Master Services Agreement

Service Use. 6.1 6.1. Each ISDN2 supports 2 channels on one physical line. 6.2 6.2. Each ISDN30 supports up to 30 channels but a minimum of 8 are required. 6.3 6.3. The CLI display feature will present the caller numbers if the Calling Line Identity is not withheld. 6.4 6.4. DDI numbers are only available for ISDN30 and multiple ISDN2s. 6.5 6.5. DDI Planning incurs a onetime charge – the charge is available in the Landline Telephony Services Wholesale Line Rental Price List. 6.6 6.6. DDI is not available at all exchanges. 6.7 6.7. Direct Dialling In (DDI) allows end-customers to control their own numbering and receipt of calls. A group of Digital channels can have up to 5 DDI number ranges allocated on the same installation. Each DDI number range would provide a continuous sequence of a minimum 10 DDI numbers. 6.8 6.8. Digits to Switch allows end Customers to programme CPE with part or all of their Directory number, so incoming calls can be routed to the correct piece of terminal equipment. The default is 6 digits and the maximum is 11.

Appears in 1 contract

Samples: Master Service Agreement

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!