Common use of Services Considered Additional Services Clause in Contracts

Services Considered Additional Services. 3.2.1 Construction phase representation at the Project site more extensive than that described in Subparagraph 2.8.5. 3.2.2 Making revisions in Drawings, Specifications or other documents but if, and onlyif, such revisions are: 3.2.2.1 Inconsistent with approvals or instructions previously given by the Owner; or 3.2.2.2 Required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of the preparation of such documents. 3.2.3 Providing services required because of significant changes in the Project including, but not limited to, size, quality, complexity and the Owner's schedule. 3.2.4 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders which require design or redesign, and which are not required to correct the Construction Documents or which are not due to oversights of the Professional. 3.2.5 Providing consultation concerning replacement of Work damaged by fire or other cause during construction, and furnishing services required in connection with the replacement of such Work. 3.2.6 Providing services made necessary by the default of the Construction Manager, by major defects or deficiencies in the Work of the Construction Manager, or by failure of performance of either the Owner or Construction Manager under the Construction Manager’s Agreement. 3.2.7 Providing services in connection with a public hearing or legal proceeding except where the Professional is party thereto. 3.2.8 When required by the Owner, preparing documents for alternate, separate or sequential bids, except issuing early civil bid packages in support of fast-track construction delivery process. 3.2.9 Programming the requirements of the Project. 3.2.10 Providing planning surveys, site evaluations or comparative studies of prospective sites. 3.2.11 Providing special surveys not included in original scope, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 3.2.12 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Facilities Program for the Project. 3.2.13 Making measured drawings of existing construction when required for planning additions or alterations thereto. 3.2.14 Providing coordination of construction performed by separate contractors or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 3.2.15 Providing interior design and other similar services required for, or in connection with, the selection, procurement or installation of furniture, furnishings and related equipment. 3.2.16 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 3.2.17 Preparing laminated reproducible record drawings and AutoCad files in digital format. 3.2.18 Providing services after issuance by the Owner of the final payment to the Construction Manager, except those services described in paragraph 2.9 which may be provided after final payment to the Construction Manager. 3.2.19 Providing services of consultants in addition to those described on Exhibit C. 3.2.20 Preparing data, making the input, and running energy modeling and/or life-cycle cost analysis programs. 3.2.21 Providing site surveys, geotechnical testing services or other special tests. 3.2.22 Providing special inspection on threshold buildings as defined in Chapter 553, Florida Statutes. 3.2.23 Providing prolonged contract administration and construction observation should the construction time specified for final completion be exceeded by more than 60 days due to no fault of the Professional. 3.2.24 Providing services relating to LEED certification if such services are in addition to services otherwise being provided and are required solely for the LEED certification. 3.2.25 Providing any other services not otherwise included in this Agreement.

Services Considered Additional Services. 3.2.1 Construction phase representation at the Project site more extensive than that described in Subparagraph 2.8.5. 3.2.2 Making revisions in Drawings, Specifications or other documents but if, and onlyifonly if, such revisions are: 3.2.2.1 Inconsistent inconsistent with approvals or instructions previously given by the Owner; or 3.2.2.2 Required required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of the preparation of such documents. 3.2.3 Providing services required because of significant changes in the Project including, but not limited to, size, quality, complexity and the Owner's schedule. 3.2.4 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders which require design or redesign, and which are not required to correct the Construction Documents or which are not due to oversights of the Professional. 3.2.5 Providing consultation concerning replacement of Work damaged by fire or other cause during construction, and furnishing services required in connection with the replacement of such Work. 3.2.6 Providing services made necessary by the default of the Construction Manager, by major defects or deficiencies in the Work of the Construction Manager, or by failure of performance of either the Owner or Construction Manager under the Construction Manager’s Agreement. 3.2.7 Providing services in connection with a public hearing or legal proceeding except where the Professional is party thereto. 3.2.8 When required by the Owner, preparing documents for alternate, separate or sequential bids, except issuing early civil bid packages in support of fast-track construction delivery process. 3.2.9 Programming the requirements of the Project. 3.2.10 Providing planning surveys, site evaluations or comparative studies of prospective sites. 3.2.11 Providing special surveys not included in original scopesurveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 3.2.12 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Facilities Program for the Project. 3.2.13 Making measured drawings of existing construction when required for planning additions or alterations thereto. 3.2.14 Providing coordination of construction performed by separate contractors or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 3.2.15 Providing interior design and other similar services required for, or in connection with, the selection, procurement or installation of furniture, furnishings and related equipment. 3.2.16 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 3.2.17 Preparing laminated Mylar reproducible record drawings and AutoCad files in digital formatdrawings. 3.2.18 Providing services after issuance by the Owner of the final payment to the Construction Manager, except those services described in paragraph 2.9 which may be provided after final payment to the Construction Manager. 3.2.19 Providing services of consultants in addition to those described on in Exhibit C. 3.2.20 Preparing data, making the input, and running energy modeling and/or life-cycle cost analysis programs. 3.2.21 Providing site surveys, geotechnical testing services or other special tests. 3.2.22 Providing special inspection on threshold buildings as defined in Chapter 553, Florida Statutes. 3.2.23 Providing prolonged contract administration and construction observation should the construction time specified for final completion be exceeded by more than 60 days due to no fault of the Professional. 3.2.24 Providing services relating to LEED certification if such services are in addition to services otherwise being provided and are required solely for the LEED certification. 3.2.25 Providing any other services not otherwise included in this Agreement.

Services Considered Additional Services. 3.2.1 Construction phase representation at the Project site more extensive than that described in Subparagraph 2.8.5being provided as part of Basic Services. 3.2.2 Making revisions in Drawings, Specifications or other documents but if, and onlyifonly if, such revisions are: 3.2.2.1 Inconsistent inconsistent with approvals or instructions previously given by the Owner; or 3.2.2.2 Required required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of the preparation of such documents. 3.2.3 Providing services required because of significant changes in the Project including, but not limited to, size, quality, complexity and the Owner's schedule. 3.2.4 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders which require design or redesign, and which are not required to correct the Construction Documents or which are not due to oversights of the Professional. 3.2.5 Providing consultation concerning replacement of Work damaged by fire or other cause during construction, and furnishing services required in connection with the replacement of such Work. 3.2.6 Providing services made necessary by the default of the Construction Manager, by major defects or deficiencies in the Work of the Construction Manager, or by failure of performance of either the Owner or Construction Manager under the Construction Manager’s Agreement. 3.2.7 Providing services in connection with a public hearing or legal proceeding except where the Professional is party thereto. 3.2.8 3.2.6 When required by the Owner, preparing documents for alternate, separate or sequential bids, except issuing early civil bid packages in support of fast-fast track construction delivery process. 3.2.9 3.2.7 Programming the requirements of the Project. 3.2.10 3.2.8 Providing planning surveys, site evaluations evaluations, or comparative studies of prospective sites. 3.2.11 3.2.9 Providing special surveys not included in original scopesurveys, environmental studies and submissions required for permit approvals of governmental authorities or others having jurisdiction over the Project. 3.2.12 3.2.10 Providing services relative to future facilities, systems and equipment, when not specifically included including in the original Facilities Program program for the Project. 3.2.13 3.2.11 Making measured drawings of existing construction when required for planning additions or alterations thereto. 3.2.14 3.2.12 Providing coordination of construction performed by separate contractors or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 3.2.15 3.2.13 Providing interior design and other similar services required for, or in connection with, the selection, procurement or installation of furniture, furnishings and related equipment. 3.2.16 3.2.14 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 3.2.17 3.2.15 Preparing laminated Mylar reproducible record drawings and AutoCad files in digital formatdrawings. 3.2.18 Providing services after issuance by the Owner of the final payment to the Construction Manager, except those services described in paragraph 2.9 which may be provided after final payment to the Construction Manager. 3.2.19 3.2.16 Providing services of consultants in addition to those described on services contemplated in Exhibit C.D. 3.2.20 3.2.17 Preparing data, making the input, input and running energy modeling and/or a life-cycle cost computer program analysis programsapproved by the Owner. 3.2.21 3.2.18 Providing site surveys, geotechnical testing services surveys or other special tests. 3.2.22 3.2.19 Providing special inspection on threshold buildings as defined in Chapter 553, Florida Statutes. 3.2.23 3.2.20 Providing prolonged contract administration and construction observation should the construction time specified for final completion completed be exceeded by more than 60 days due to no fault of the Professional. 3.2.24 Providing services relating to LEED certification if such services are in addition to services otherwise being provided and are required solely for the LEED certification. 3.2.25 3.2.21 Providing any other services not otherwise included in this Agreement.

Services Considered Additional Services. 3.2.1 Construction phase representation at the Project site more extensive than that described in Subparagraph 2.8.5. 3.2.2 Making revisions in Drawings, Specifications or other documents but if, and onlyifonly if, such revisions are: 3.2.2.1 Inconsistent with approvals or instructions previously given by the Owner; or 3.2.2.2 Required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of the preparation of such documents. 3.2.3 Providing services required because of significant changes in the Project including, but not limited to, size, quality, complexity and the Owner's scheduleschedule and budget. 3.2.4 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders which require design or redesign, and which are not required to correct the Construction Documents or which are not due to oversights of the Professional. 3.2.5 Providing consultation concerning replacement of Work damaged by fire or other cause during construction, and furnishing services required in connection with the replacement of such Work. 3.2.6 Providing services made necessary by the default of the Construction Manager, by major defects or deficiencies in the Work of the Construction Manager, or by failure of performance of either the Owner or Construction Manager under the Construction Manager’s AgreementAgreement with the Owner. 3.2.7 Providing services in connection with a public hearing or legal proceeding except where the Professional is party thereto. 3.2.8 When required by the Owner, preparing documents for alternate, separate or sequential bids, except issuing early civil bid solicitation packages in support of fast-track construction delivery process. 3.2.9 Programming the requirements of the Project. 3.2.10 Providing planning surveys, site evaluations or comparative studies of prospective sites. 3.2.11 Providing special surveys not included in original scopesurveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 3.2.12 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Facilities Program program for the Project. 3.2.13 Making measured drawings of existing construction when required for planning additions or alterations thereto. 3.2.14 Providing coordination of construction performed by separate contractors Construction Managers or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 3.2.15 Providing interior design and other similar services required for, or in connection with, the selection, procurement or installation of furniture, furnishings and related equipment. 3.2.16 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 3.2.17 Preparing laminated Mylar reproducible record drawings and AutoCad files in digital formatdrawings. 3.2.18 Providing services after issuance by the Owner of the final payment to the Construction ManagerProfessional, except those services described in paragraph 2.9 which may be provided after final payment to the Construction ManagerProfessional. 3.2.19 Providing services of consultants in addition to for other than architectural, structural, mechanical, plumbing, fire protection and electrical engineering portions of the Project and those services described on Exhibit C. 3.2.20 Preparing data, making inputting the input, data and running energy modeling and/or a life-cycle cost computer program analysis programsapproved by the Owner. 3.2.21 Providing site surveys, geotechnical testing services or other special tests. 3.2.22 Providing special inspection on threshold buildings as defined in Chapter 553, Florida Statutes. 3.2.23 Providing prolonged contract administration and construction observation should the construction time specified for final completion be exceeded by more than 60 days due to no fault of the Professional. 3.2.24 Providing services relating to LEED certification if such services are in addition to services otherwise being provided and are required solely for the LEED certification. 3.2.25 Providing any other services not otherwise included in this Agreement. 3.2.25 Notwithstanding anything to the contrary herein, Professional shall not be entitled to additional design fees if the same are necessitated by the fault of Professional. 3.2.26 Providing any other services shown on Exhibit C marked with a “No/X” that may be considered at a later date.

Services Considered Additional Services. 3.2.1 Construction phase representation at the Project site more extensive than that described in Subparagraph 2.8.5being provided as part of the Basic Services. 3.2.2 Making revisions in Drawings, Specifications or other documents but if, and onlyifonly if, such revisions are: 3.2.2.1 Inconsistent inconsistent with approvals or instructions previously given by the Owner; or 3.2.2.2 Required required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of the preparation of such documents. 3.2.3 Providing services required because of significant changes in the Project including, but not limited to, size, quality, complexity and the Owner's schedule. 3.2.4 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders which require design or redesign, and which are not required to correct the Construction Documents or which are not due to oversights of the Professional. 3.2.5 Providing consultation concerning replacement of Work damaged by fire or other cause during construction, and furnishing services required in connection with the replacement of such Work. 3.2.6 Providing services made necessary by the default of the Construction Manager, by major defects or deficiencies in the Work of the Construction Manager, or by failure of performance of either the Owner or Construction Manager under the Construction Manager’s Agreement. 3.2.7 Providing services in connection with a public hearing or legal proceeding except where the Professional is party thereto. 3.2.8 3.2.6 When required by the Owner, preparing documents for alternate, separate or sequential bids, except issuing early civil bid packages in support of fast-track construction delivery process. 3.2.9 3.2.7 Programming the requirements of the Project. 3.2.10 3.2.8 Providing planning surveys, site evaluations or comparative studies of prospective sites. 3.2.11 3.2.9 Providing special surveys not included in original scopesurveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 3.2.12 3.2.10 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Facilities Program for the Project. 3.2.13 3.2.11 Making measured drawings of existing construction when required for planning additions or alterations thereto. 3.2.14 3.2.12 Providing coordination of construction performed by separate contractors or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 3.2.15 3.2.13 Providing interior design and other similar services required for, or in connection with, the selection, procurement or installation of furniture, furnishings and related equipment. 3.2.16 3.2.14 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 3.2.17 3.2.15 Preparing laminated Mylar reproducible record drawings and AutoCad files in digital formatdrawings. 3.2.18 Providing services after issuance by the Owner of the final payment to the Construction Manager, except those services described in paragraph 2.9 which may be provided after final payment to the Construction Manager. 3.2.19 3.2.16 Providing services of consultants in addition to those described on Exhibit C. 3.2.20 3.2.17 Preparing data, making the input, and running energy modeling and/or life-cycle cost analysis programs. 3.2.21 3.2.18 Providing site surveys, geotechnical testing services or other special tests. 3.2.22 3.2.19 Providing special inspection on threshold buildings as defined in Chapter 553, Florida Statutes. 3.2.23 3.2.20 Providing prolonged contract administration and construction observation should the construction time specified for final completion be exceeded by more than 60 days due to no fault of the Professional. 3.2.24 Providing services relating to LEED certification if such services are in addition to services otherwise being provided and are required solely for the LEED certification. 3.2.25 3.2.21 Providing any other services not otherwise included in this Agreement.

Services Considered Additional Services. 3.2.1 Construction phase representation at the Project site more extensive than that described in Subparagraph 2.8.5. 3.2.2 Making revisions in Drawings, Specifications or other documents but if, and onlyifonly if, such revisions are: 3.2.2.1 Inconsistent inconsistent with approvals or instructions previously given by the Owner; or 3.2.2.2 Required required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of the preparation of such documents. 3.2.3 Providing services required because of significant changes in the Project including, but not limited to, size, quality, complexity and the Owner's schedule. 3.2.4 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders which require design or redesign, and which are not required to correct the Construction Documents or which are not due to oversights of the Professional. 3.2.5 Providing consultation concerning replacement of Work damaged by fire or other cause during constructionconstruc­tion, and furnishing services required in connection with the replacement of such Work. 3.2.6 Providing services made necessary by the default of the Construction ManagerBuilder, by major defects or deficiencies in the Work of the Construction ManagerBuilder, or by failure of performance of either the Owner or Construction Manager Builder under the Construction ManagerBuilder’s Agreementagreement with the Owner. 3.2.7 Providing services in connection with a public hearing or legal proceeding except where the Professional is party thereto. 3.2.8 When required by the Owner, preparing documents for alternate, separate or sequential bids, except issuing early civil bid packages in support of fast-track construction delivery process. 3.2.9 Programming the requirements of the Project. 3.2.10 Providing planning surveys, site evaluations or comparative studies of prospective sites. 3.2.11 Providing special surveys not included in original scopesurveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 3.2.12 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Facilities Program for the Project. 3.2.13 Making measured drawings of existing construction when required for planning additions or alterations thereto. 3.2.14 Providing coordination of construction performed by separate contractors or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 3.2.15 Providing interior design and other similar services required for, or in connection with, the selection, procurement or installation of furniture, furnishings and related equipment. 3.2.16 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 3.2.17 Preparing laminated Mylar reproducible record drawings and AutoCad files in digital formatdrawings. 3.2.18 Providing services after issuance by the Owner of the final payment to the Construction ManagerBuilder, except those services described in paragraph 2.9 which may be provided after final payment to the Construction ManagerBuilder. 3.2.19 Providing services of consultants in addition to those described services contemplated on Exhibit C. 3.2.20 Preparing data, making the input, and running energy modeling and/or life-cycle cost analysis programs. 3.2.21 Providing site surveys, geotechnical testing services or other special tests. 3.2.22 Providing special inspection on threshold buildings as defined in Chapter 553, Florida Statutes. 3.2.23 Providing prolonged contract administration and construction observation should the construction time specified for final completion be exceeded by more than 60 days due to no fault of the Professional. 3.2.24 Providing services relating to LEED certification if such services are in addition additional to services otherwise being provided and are required solely for the LEED certification. 3.2.25 Providing any other services not otherwise included in this Agreement.

Services Considered Additional Services. 3.2.1 Construction phase representation at the Project site more extensive than that described in Subparagraph 2.8.5. 3.2.2 Making revisions in Drawings, Specifications or other documents but if, and onlyifonly if, such revisions are: 3.2.2.1 Inconsistent inconsistent with approvals or instructions previously given by the Owner; or 3.2.2.2 Required required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of the preparation of such documents. 3.2.3 Providing services required because of significant changes in the Project including, but not limited to, size, quality, complexity and the Owner's schedule. 3.2.4 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders which require design or redesign, and which are not required to correct the Construction Documents or which are not due to oversights of the Professional. 3.2.5 Providing consultation concerning replacement of Work damaged by fire or other cause during construction, and furnishing services required in connection with the replacement of such Work. 3.2.6 Providing services made necessary by the default of the Construction ManagerBuilder, by major defects or deficiencies in the Work of the Construction ManagerBuilder, or by failure of performance of either the Owner or Construction Manager Builder under the Construction ManagerBuilder’s Agreementagreement with the Owner. 3.2.7 Providing services in connection with a public hearing or legal proceeding except where the Professional is party thereto. 3.2.8 When required by the Owner, preparing documents for alternate, separate or sequential bids, except issuing early civil bid packages in support of fast-track construction delivery process. 3.2.9 Programming the requirements of the Project. 3.2.10 Providing planning surveys, site evaluations or comparative studies of prospective sites. 3.2.11 Providing special surveys not included in original scopesurveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 3.2.12 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Facilities Program for the Project. 3.2.13 Making measured drawings of existing construction when required for planning additions or alterations thereto. 3.2.14 Providing coordination of construction performed by separate contractors or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 3.2.15 Providing interior design and other similar services required for, or in connection with, the selection, procurement or installation of furniture, furnishings and related equipment. 3.2.16 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 3.2.17 Preparing laminated Mylar reproducible record drawings and AutoCad files in digital formatdrawings. 3.2.18 Providing services after issuance by the Owner of the final payment to the Construction ManagerBuilder, except those services described in paragraph 2.9 which may be provided after final payment to the Construction ManagerBuilder. 3.2.19 Providing services of consultants in addition to those described on services contemplated in Exhibit C. 3.2.20 Preparing data, making the input, and running energy modeling and/or life-cycle cost analysis programs. 3.2.21 Providing site surveys, geotechnical testing services or other special tests. 3.2.22 Providing special inspection on threshold buildings as defined in Chapter 553, Florida Statutes. 3.2.23 Providing prolonged contract administration and construction observation should the construction time specified for final completion be exceeded by more than 60 days due to no fault of the Professional. 3.2.24 Providing services relating to LEED certification if such services are in addition additional to services otherwise being provided and are required solely for the LEED certification. 3.2.25 Providing any other services not otherwise included in this Agreement.

Services Considered Additional Services. 3.2.1 Construction phase representation at the Project site more extensive than that described in Subparagraph 2.8.5. 3.2.2 Making revisions in Drawings, Specifications or other documents but if, and onlyifonly if, such revisions are: 3.2.2.1 Inconsistent with approvals or instructions previously given by the Owner; or 3.2.2.2 Required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of the preparation of such documents. 3.2.3 Providing services required because of significant changes in the Project including, but not limited to, size, quality, complexity and the Owner's schedule. 3.2.4 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders which require design or redesign, and which are not required to correct the Construction Documents or which are not due to oversights of the Professional. 3.2.5 Providing consultation concerning replacement of Work damaged by fire or other cause during construction, and furnishing services required in connection with the replacement of such Work. 3.2.6 Providing services made necessary by the default of the Construction Manager, by major defects or deficiencies in the Work of the Construction Manager, or by failure of performance of either the Owner or Construction Manager under the Construction Manager’s Agreement. 3.2.7 Providing services in connection with a public hearing or legal proceeding except where the Professional is party thereto. 3.2.8 When required by the Owner, preparing documents for alternate, separate or sequential bids, except issuing early civil bid packages in support of fast-track construction delivery process. 3.2.9 Programming the requirements of the Project. 3.2.10 Providing planning surveys, site evaluations or comparative studies of prospective sites. 3.2.11 Providing special surveys not included in original scopesurveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 3.2.12 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Facilities Program for the Project. 3.2.13 Making measured drawings of existing construction when required for planning additions or alterations thereto. 3.2.14 Providing coordination of construction performed by separate contractors or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 3.2.15 Providing interior design and other similar services required for, or in connection with, the selection, procurement or installation of furniture, furnishings and related equipment. 3.2.16 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 3.2.17 Preparing laminated reproducible record drawings and AutoCad files in digital format. 3.2.18 Providing services after issuance by the Owner of the final payment to the Construction Manager, except those services described in paragraph 2.9 which may be provided after final payment to the Construction Manager. 3.2.19 Providing services of consultants in addition to those described on Exhibit C. 3.2.20 Preparing data, making the input, and running energy modeling and/or life-cycle cost analysis programs. 3.2.21 Providing site surveys, geotechnical testing services or other special tests. 3.2.22 Providing special inspection on threshold buildings as defined in Chapter 553, Florida Statutes. 3.2.23 Providing prolonged contract administration and construction observation should the construction time specified for final completion be exceeded by more than 60 days due to no fault of the Professional. 3.2.24 Providing services relating to LEED certification if such services are in addition to services otherwise being provided and are required solely for the LEED certification. 3.2.25 Providing any other services not otherwise included in this Agreement.

Services Considered Additional Services. 3.2.1 Construction phase representation at the Project site more extensive than that described in Subparagraph 2.8.5. 3.2.2 Making revisions in Drawings, Specifications or other documents but if, and onlyifonly if, such revisions are: 3.2.2.1 Inconsistent inconsistent with approvals or instructions previously given by the Owner; or 3.2.2.2 Required required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of the preparation of such documents. 3.2.3 Providing services required because of significant changes in the Project including, but not limited to, size, quality, complexity and the Owner's schedule. 3.2.4 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders which require design or redesign, and which are not required to correct the Construction Documents or which are not due to oversights of the Professional. 3.2.5 Providing consultation concerning replacement of Work damaged by fire or other cause during constructionconstruc­tion, and furnishing services required in connection with the replacement of such Work. 3.2.6 Providing services made necessary by the default of the Construction Manager, by major defects or deficiencies in the Work of the Construction Manager, or by failure of performance of either the Owner or Construction Manager under the Construction Manager’s Agreement. 3.2.7 Providing services in connection with a public hearing or legal proceeding except where the Professional is party thereto. 3.2.8 When required by the Owner, preparing documents for alternate, separate or sequential bids, except issuing early civil bid packages in support of fast-track construction delivery process. 3.2.9 Programming the requirements of the Project. 3.2.10 Providing planning surveys, site evaluations or comparative studies of prospective sites. 3.2.11 Providing special surveys not included in original scopesurveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 3.2.12 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Facilities Program for the Project. 3.2.13 Making measured drawings of existing construction when required for planning additions or alterations thereto. 3.2.14 Providing coordination of construction performed by separate contractors or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 3.2.15 Providing interior design and other similar services required for, or in connection with, the selection, procurement or installation of furniture, furnishings and related equipment. 3.2.16 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 3.2.17 Preparing laminated Mylar reproducible record drawings and AutoCad files in digital formatdrawings. 3.2.18 Providing services after issuance by the Owner of the final payment to the Construction Manager, except those services described in paragraph 2.9 which may be provided after final payment to the Construction Manager. 3.2.19 Providing services of consultants in addition to those described on Exhibit C. 3.2.20 Preparing data, making the input, and running energy modeling and/or life-cycle cost analysis programs. 3.2.21 Providing site surveys, geotechnical testing services or other special tests. 3.2.22 Providing special inspection on threshold buildings as defined in Chapter 553, Florida Statutes. 3.2.23 Providing prolonged contract administration and construction observation should the construction time specified for final completion be exceeded by more than 60 days due to no fault of the Professional. 3.2.24 Providing services relating to LEED certification if such services are in addition to services otherwise being provided and are required solely for the LEED certification. 3.2.25 Providing any other services not otherwise included in this Agreement.

Services Considered Additional Services. 3.2.1 Construction phase representation at the Project site more extensive than that described in Subparagraph 2.8.5. 3.2.2 Making revisions in Drawings, Specifications or other documents but if, and onlyifonly if, such revisions are: 3.2.2.1 Inconsistent inconsistent with approvals or instructions previously given by the Owner; or 3.2.2.2 Required required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of the preparation of such documents. 3.2.3 Providing services required because of significant changes in the Project including, but not limited to, size, quality, complexity and the Owner's schedule. 3.2.4 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders which require design or redesign, and which are not required to correct the Construction Documents or which are not due to oversights of the Professional. 3.2.5 Providing consultation concerning replacement of Work damaged by fire or other cause during constructionconstruc­tion, and furnishing services required in connection with the replacement of such Work. 3.2.6 Providing services made necessary by the default of the Construction Manager, by major defects or deficiencies in the Work of the Construction Manager, or by failure of performance of either the Owner or Construction Manager under the Construction Manager’s Agreement. 3.2.7 Providing services in connection with a public hearing or legal proceeding except where the Professional is party thereto. 3.2.8 When required by the Owner, preparing documents for alternate, separate or sequential bids, except issuing early civil bid packages in support of fast-track construction delivery process. 3.2.9 Programming the requirements of the Project. 3.2.10 Providing planning surveys, site evaluations or comparative studies of prospective sites. 3.2.11 Providing special surveys not included in original scopesurveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 3.2.12 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Facilities Program for the Project. 3.2.13 Making measured drawings of existing construction when required for planning additions or alterations thereto. 3.2.14 Providing coordination of construction performed by separate contractors or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 3.2.15 Providing interior design and other similar services required for, or in connection with, the selection, procurement or installation of furniture, furnishings and related equipment. 3.2.16 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 3.2.17 Preparing laminated Mylar reproducible record drawings and AutoCad files in digital formatdrawings. 3.2.18 Providing services after issuance by the Owner of the final payment to the Construction Manager, except those services described in paragraph 2.9 which may be provided after final payment to the Construction Manager. 3.2.19 Providing services of consultants in addition to those described on in Exhibit C. 3.2.20 Preparing data, making the input, and running energy modeling and/or life-cycle cost analysis programs. 3.2.21 Providing site surveys, geotechnical testing services or other special tests. 3.2.22 Providing special inspection on threshold buildings as defined in Chapter 553, Florida Statutes. 3.2.23 Providing prolonged contract administration and construction observation should the construction time specified for final completion be exceeded by more than 60 days due to no fault of the Professional. 3.2.24 Providing services relating to LEED certification if such services are in addition to services otherwise being provided and are required solely for the LEED certification. 3.2.25 Providing any other services not otherwise included in this Agreement.

Services Considered Additional Services. 3.2.1 Construction phase representation at the Project site more extensive than that described in Subparagraph 2.8.52.5.5. 3.2.2 Making revisions in Drawings, Specifications or other documents but if, and onlyifonly if, such revisions are: 3.2.2.1 Inconsistent inconsistent with approvals or instructions previously given by the Owner; or 3.2.2.2 Required required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents and not reasonably foreseeable at the time of the preparation of such documents. 3.2.3 Providing services required because of significant changes in the Project including, but not limited to, size, quality, complexity and the Owner's schedule. 3.2.4 Preparing Drawings, Specifications and other documentation and supporting data in connection with Change Orders which require design or redesign, and which are not required to correct the Construction Documents or which are not due to oversights of the Professional. 3.2.5 Providing consultation concerning replacement of Work damaged by fire or other cause during construction, and furnishing services required in connection with the replacement of such Work. 3.2.6 Providing services made necessary by the default of the Construction ManagerBuilder, by major defects or deficiencies in the Work of the Construction ManagerBuilder, or by failure of performance of either the Owner or Construction Manager Builder under the Construction ManagerBuilder’s Agreement. 3.2.7 Providing services in connection with a public hearing or legal proceeding except where the Professional is party thereto. 3.2.8 When required by the Owner, preparing documents for alternate, separate or sequential bids, except issuing early civil bid packages in support of fast-track construction delivery process. 3.2.9 Programming the requirements of the Project. 3.2.10 Providing planning surveys, site evaluations or comparative studies of prospective sites. 3.2.11 Providing special surveys not included in original scopesurveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the Project. 3.2.12 Providing services relative to future facilities, systems and equipment, when not specifically included in the original Facilities Program for the Project. 3.2.13 Making measured drawings of existing construction when required for planning additions or alterations thereto. 3.2.14 Providing coordination of construction performed by separate contractors or by the Owner's own forces and coordination of services required in connection with construction performed and equipment supplied by the Owner. 3.2.15 Providing interior design and other similar services required for, or in connection with, the selection, procurement or installation of furniture, furnishings and related equipment. 3.2.16 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities. 3.2.17 Preparing laminated Mylar reproducible record drawings and AutoCad files in digital formatdrawings. 3.2.18 Providing services after issuance by the Owner of the final payment to the Construction ManagerBuilder, except those services described in paragraph 2.9 2.6 which may be provided after final payment to the Construction ManagerBuilder. 3.2.19 Providing services of consultants in addition to those described on Exhibit C.XX. 3.2.20 Preparing data, making the input, and running energy modeling and/or life-cycle cost analysis programs. 3.2.21 Providing site surveys, geotechnical testing services or other special tests. 3.2.22 Providing special inspection on threshold buildings as defined in Chapter 553, Florida Statutes. 3.2.23 Providing prolonged contract administration and construction observation should the construction time specified for final completion be exceeded by more than 60 days due to no fault of the Professional. 3.2.24 Providing services relating to LEED certification if such services are in addition to services otherwise being provided and are required solely for the LEED certification. 3.2.25 Providing any other services not otherwise included in this Agreement.