Shaft and Electrode Tip Sample Clauses

Shaft and Electrode Tip. The Shaft and Electrode Tip provide the actual working portion of this system.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs

Related to Shaft and Electrode Tip

  • Formation; Composition Each Party will initially appoint [***] representatives to the JCC, with each representative having knowledge and expertise in the commercialization of products similar to the Regional Licensed Products and having sufficient seniority within the applicable Party to make decisions arising within the scope of the JCC’s responsibilities. The JCC may change its size from time to time by mutual consent of its members, provided that the JCC will consist at all times of an equal number of representatives of each of Surface and Novartis. Each Party may replace its JCC representatives at any time upon written notice to the other Party. The JCC may invite non-members to participate in the discussions and meetings of the JCC, provided that such participants have no voting authority at the JCC and are bound under written obligation of confidentiality no less protective of the Parties’ Confidential Information than those set forth in this Agreement. The JCC will be co-chaired, with one chairperson designated by Surface and [***] designated by Novartis, whose responsibilities will include conducting meetings, including, when feasible, ensuring that objectives for each meeting are set and achieved. Responsibility for running each meeting of the JCC will alternate between the chairpersons from meeting-to-meeting, with Novartis’s chairperson running the first meeting. CERTAIN CONFIDENTIAL PORTIONS OF THIS EXHIBIT WERE OMITTED AND REPLACED WITH “[***]”. A COMPLETE VERSION OF THIS EXHIBIT HAS BEEN FILED SEPARATELY WITH THE SECRETARY OF THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO AN APPLICATION REQUESTING CONFIDENTIAL TREATMENT PURSUANT TO RULE 406 PROMULGATED UNDER THE SECURITIES ACT OF 1933, AS AMENDED.

  • Information Systems Acquisition Development and Maintenance a. Client Data – Client Data will only be used by State Street for the purposes specified in this Agreement.

  • Heating, Ventilation and Air Conditioning Landlord shall furnish to the Premises heating, ventilation and air-conditioning (“HVAC”) in accordance with the Design Standards set forth in Exhibit D during Ordinary Business Hours. Landlord shall have access to all air-cooling, fan, ventilating and machine rooms and electrical closets and all other mechanical installations of Landlord (collectively, “Mechanical Installations”), and Tenant shall not construct partitions or other obstructions which may interfere with Landlord’s access thereto or the moving of Landlord’s equipment to and from the Mechanical Installations. No Tenant Party shall at any time enter the Mechanical Installations or tamper with, adjust, or otherwise affect such Mechanical Installations. Landlord shall not be responsible if the HVAC System fails to provide cooled or heated air, as the case may be, to the Premises in accordance with the Design Standards by reason of (i) any equipment installed by, for or on behalf of Tenant, which has an electrical load in excess of the average electrical load and human occupancy factors for the HVAC System as designed, or (ii) any rearrangement of partitioning or other Alterations made or performed by, for or on behalf of Tenant. Tenant shall install, if missing, blinds or shades on all windows, which blinds and shades shall be subject to Landlord’s approval, and shall keep operable windows in the Premises closed, and lower the blinds when necessary because of the sun’s position, whenever the HVAC System is in operation or as and when required by any Requirement. Tenant shall cooperate with Landlord and shall abide by the rules and regulations which Landlord may reasonably prescribe for the proper functioning and protection of the HVAC System. Tenant acknowledges that the server room in the Premises currently has three heat pumps installed, being two 4-ton units, and one 2.5-ton unit (the “Existing Heat Pumps”). The 2.5-ton unit is currently connected and operational. Tenant shall determine whether it is satisfied with the condition of the Existing Heat Pumps and Landlord shall not have any responsibility or liability for the condition, operation, maintenance, repair or replacement of the Existing Heat Pumps. Tenant may operate the Existing Heat Pumps. Tenant shall be responsible for, and pay directly for, all necessary maintenance and repairs to the Existing Heat Pumps. Tenant shall reimburse Landlord monthly for the cost of all utility services used to operate the Existing Heat Pumps within 10 Business Days after receipt of Landlord’s invoice for such amount. Landlord may measure Tenant’s usage of such utility services by either a sub-meter or by other reasonable methods such as by temporary check meters or by survey. Tenant, at its cost, may replace the Existing Heat Pumps with one or more new heat pumps, provided, however, that the capacity of such replacement heat pump(s) shall not exceed the 10.5-ton capacity cooling capacity of the Existing Heat Pumps.

  • HEATING, VENTILATING AND AIR CONDITIONING The Tenant will operate and regulate those portions of the heating, ventilating, and air conditioning equipment within and serving the Leased Premises so as to maintain such reasonable conditions of temperature and humidity within the Leased Premises as are determined by the Landlord and its Architect and engineers so that no direct or indirect appropriation of the heating, ventilating and air conditioning from the other portions of the Building occurs. The Tenant shall comply with such stipulations and with all Rules and Regulations of the Landlord pertaining to the operation and regulation of such equipment. The Tenant shall immediately notify the Landlord in the event that any repairs are required to the heating, ventilating and air conditioning equipment serving the Leased Premises and shall reimburse the Landlord as part of its Proportionate Share of Operating Costs for the cost of any maintenance, repairs or replacements made by the Landlord in respect of the heating, ventilating and air conditioning equipment serving the Leased Premises. The Landlord acknowledges that the Tenant shall not be responsible for the cost of capital repairs and capital replacements in respect of the heating, ventilating and air conditioning equipment serving the Leased Premises provided that such capital repairs and capital replacements are not necessitated by the Tenant's incorrect or negligent use of equipment. The Tenant shall not under any circumstances go onto the roof of the Building or make any maintenance repairs or replacements to the heating, ventilating and air conditioning systems in the Building without the prior written consent of the Landlord. If the Tenant fails to comply with such stipulations and Rules and Regulations, the Landlord shall be entitled to take such steps as it deems advisable to correct such defaults (including, without limitation, entering upon the Leased Premises and assuming control of such equipment) without liability to the Tenant, and the Tenant will pay to the Landlord forthwith upon demand as Additional Rent all costs and expenses incurred by the Landlord in so doing. The Landlord represents and warrants to the Tenant that the heating, ventilating and air conditioning equipment serving the Leased Premises and required to be installed by the Landlord pursuant to Schedule "C" is and will be at the Commencement Date in good working order and condition.

  • WHEXXXX xs xxxx of a plan of reorganization, RESTART PARTNERS, L.P., a Delaware Limited Partnership ("Restart"), may acquire an ownership interest in Elsinore Corporation ("Elsinore") or the Four Queens, Inc. ("FQI");

  • Installation and Conversion State Street and the Fund shall be responsible for the technical installation and conversion (“Installation and Conversion”) of the Designated Configuration. The Fund shall have the following responsibilities in connection with Installation and Conversion of the System:

  • Formation and Composition Within [ * ] after the Signing Date, the Parties shall establish a Joint Development Committee that shall oversee the Development and Manufacture (for Development) of Collaboration Products in Field in the Territory in accordance with the Development Plans for such Collaboration Products and to coordinate the Development and related Manufacturing activities of the Parties with respect to such Collaboration Products. Each Party shall initially appoint three (3) representatives to the JDC, each of whom will be an officer or employee of such Party and will have knowledge and expertise in the Development or Manufacture of products similar to the Collaboration Products and sufficient seniority within the applicable Party to make decisions arising within the scope of the JDC’s responsibilities. The JDC may change its size from time to time by mutual consent of its members. Each Party may replace its JDC representatives at any time upon written notice to the other Party. The JDC may invite non-members (including consultants and advisors of a Party who are under an obligation of confidentiality consistent with this Agreement) to participate in the discussions and meetings of the JDC, provided that such participants shall have no voting authority at the JDC. The JDC shall have a chairperson. Each Party shall have the right, on an alternating Calendar Year basis, to select from among its JDC representatives a representative to serve as the chairperson of the JDC during such Calendar Year. Such Party shall have the right during such Calendar Year to replace the chairperson of the JDC with one of its other JDC representatives. The initial chairperson shall be designated by [ * ]. The role of the chairperson shall be to convene and preside at meetings of the JDC, to prepare agendas (with due input from the other Party’s representatives), circulate agendas and to ensure the preparation of meeting minutes, but the chairperson shall have no additional powers or rights beyond those held by the other JDC representatives.

  • Virus Management Transfer Agent shall maintain a malware protection program designed to deter malware infections, detect the presence of malware within the Transfer Agent environment.

  • Sprinkler System If there now is or shall be installed in the Building a "sprinkler system", and such system or any of its appliances shall be damaged or injured or not in proper working order by reason of any act or omission of Tenant, Tenant's agents, servants, employees, licensees or visitors, Tenant shall forthwith restore the same to good working condition at its own expense; and if the New York Board of Fire Underwriters or the New York Fire Insurance Rating Organization or any bureau, department or official of the state or city government, shall require or recommend that any changes, modifications, alterations or additional sprinkler heads or other equipment be made or supplied by reason of Tenant's business, or the location of the partitions, trade fixtures, or other contents of the Premises, Tenant shall, at Tenant's expense, promptly make and supply such changes, modifications, alterations, additional sprinkler heads or other equipment.

Time is Money Join Law Insider Premium to draft better contracts faster.