Spectrometer Sample Clauses

Spectrometer. Spectrometer failure will constitute grounds for re-flight. No missing data.
Sample 1Sample 2
AutoNDA by SimpleDocs
Spectrometer. The Spectrometer will be a Radiations Solutions Inc. RS-500 system with 16L down and 4L up. The sample rate will be once every second. The spectrums will also be recorded.
Sample 1Sample 2
Spectrometer. Pico-Envirotec GRS-410 multi-channel gamma-ray spectrometer with 16.8 litres “downward looking” NaI sensor, and 4.2 litres “upward looking” NaI sensor will be installed on the helicopter for the survey. The GRS-410 is a self-stabilizing spectrometer, and tracks and corrects for the spectral drift by following a spectral peak, typically thorium. The standard regions of interest, as listed below, will be recorded and processed. The 256 channel digital data will be recorded and provided to Client. An example of the standard regions of interest that will be recorded, with window in MeV, is given in the table below: Table 5: Sample Regions of Interest (ROI). Sample of Standard Windows Element Approximate Lower Boundary (MeV) Approximate Upper Boundary (MeV) Total Count 0.41 2.81 Potassium 1.37 1.57 Uranium 1.66 1.86 Thorium 2.41 2.81 Cosmic 3.00 ∞
Sample 1
Spectrometer. Pico-Envirotec GRS-410 multi-channel gamma-ray spectrometer with 16.8 litres “downward looking” NaI sensor, and 4.2 litres “upward looking” NaI sensor will be installed on the helicopter for the survey. The GRS-410 is a self-stabilizing spectrometer, and tracks and corrects for the spectral drift by following a spectral peak, typically thorium. The standard regions of interest, as listed below, will be recorded and processed. The 256 channel digital data will be recorded and provided to Client. An example of the standard regions of interest that will be recorded, with window in MeV, is given in the table below: Table 5: Sample Regions of Interest (ROI). Sample of Standard Windows Element Approximate Lower Boundary (MeV) Approximate Upper Boundary (MeV) Total Count 0.41 2.81 Potassium 1.37 1.57 Uranium 1.66 1.86 Thorium 2.41 2.81 Cosmic 3.00 ¥ C7.7. Ground Support Equipment The base station and in-field data processing quality control and quality assurance (QA/QC) system will consist of the following equipment: · A Field Workstation, comprising a Pentium PC, a printer and full data processing software. · A Gem Systems GSM-19TW magnetometer base station, with digital recording, will be utilized on this survey. This magnetometer will be operated continuously throughout the survey operations. The base station will be synchronized with the airborne system by GPS time. The resolution of this magnetometer is 0.1 nT. During survey operations, the magnetometer will sample at a rate of once a second. Every effort will be made to ensure that the magnetometer sensor is placed in a location with a low magnetic gradient. In addition, it will be sited away from moving ferrous objects, such as vehicles, and electric power transmission lines, such that these sources of man-made noise will not exceed 0.1 nT · A complement of spare parts and test equipment {00140175.2 / 0899-001} 20 Xxxxxxxxxx, Xxxx 00, Xxxxxxx, Xxxxxxx, Xxxxxx, X0X 0X0 Tel: (000) 000-0000 Fax: (905) 947- 1784 E-Mail: ixxx@xxxxxxxxxxxxx.xxx Web: wxx.xxxxxxxxxxxxx.xxx -24- P1177 Helicopter-borne Geophysical Survey, Mexico – October 2011 Figure 7: A GSM19 base magnetometer with integrated GPS
Sample 1
Spectrometer. Hardware Software & analysis Lab demo Alignment, control, and data acquisition • Project key facts • Motivation • Project objectives • Project technology • Photonic sources • Components and sub-systems • Automated algorithms • Demonstration • Summary • Glaucoma is the second leading cause of blindness globally • Universal screening could save 4M cases of blindness p.a. worldwide • Ultra-high resolution OCT is a key candidate screening technology • Polarisation sensitive OCT could offer new information to clinicians • UHT PS OCT requires • Very broadband polarised sources: SCS • Very broadband polarisation maintaining delay lines and components • Automated algorithms could assess OCT images • Traffic light output to indicate high risk patients for further testing • Demonstration on rodents to be performed at two hospital laboratories Thank you for your attention!! xxx.xxxxxxx-xxxxxxx.xx Technical enquiries Xxxx Xxxxxxx-Xxxxxxx Xxxxx and Xxxxxxx (Torquay) xxxxxxxx-xxxxxxx@xxxxxxxxxxxxxxx.xxx Other enquiries Xxxxx Xxxxxx Vivid Components
Sample 1

Related to Spectrometer

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Metering The Interconnection Customer shall be responsible for the Connecting Transmission Owner’s reasonable and necessary cost for the purchase, installation, operation, maintenance, testing, repair, and replacement of metering and data acquisition equipment specified in Attachments 2 and 3 of this Agreement. The Interconnection Customer’s metering (and data acquisition, as required) equipment shall conform to applicable industry rules and Operating Requirements.

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time.

  • Compatibility 1. Any unresolved issue arising from a mutual agreement procedure case otherwise within the scope of the arbitration process provided for in this Article and Articles 25A to 25G shall not be submitted to arbitration if the issue falls within the scope of a case with respect to which an arbitration panel or similar body has previously been set up in accordance with a bilateral or multilateral convention that provides for mandatory binding arbitration of unresolved issues arising from a mutual agreement procedure case.

  • Interfaces Bellcore’s GR-446-CORE defines the interface between the administration system and LIDB including specific message formats. (Bellcore’s TR-NWP-000029, Section 10)

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Programming (a) Pursuant to Section 624 of the Cable Act, the Licensee shall maintain the mix, quality and broad categories of Programming set forth in Exhibit 4, attached hereto and made a part hereof. Pursuant to applicable federal law, all Programming decisions, including the Programming listed in Exhibit 4, attached hereto, shall be at the sole discretion of the Licensee.

  • Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements.

  • Temperature Where low temperature and/or self-service cases are used for any of such merchandise coming under the jurisdiction of the Union, such cases shall be served only by employees covered by this Agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!