Common use of STANDARDS AND REGULATIONS Clause in Contracts

STANDARDS AND REGULATIONS. 3.1 The Goods shall be supplied in accordance with the description and specification set out in the Contract. 3.2 Where no specification or standard is stated then all Goods shall be supplied in accordance with the relevant JIS Standard, or to a recognised national standard in the country of manufacture acceptable to Crown Agents. 3.3 The Contractor shall comply with all applicable statutory and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Goods, including without limitation all applicable statutory and regulatory requirements within the country where the Goods are manufactured and within the Principal’s country. 3.4 The Contractor shall provide the Services in accordance with the terms of the Contract. 3.5 In providing the Services the Contractor shall: a. co-operate with Crown Agents and/or the Principal and/or the End-User in all matters relating to the Services and comply with all instructions of Crown Agents; b. perform the Services with the best care, skill and diligence in accordance with best practice in the Contractor’s industry, profession or trade; c. ensure that the Services and Deliverables will conform with all descriptions and specifications set out in the Contract and that the Deliverables shall be fit for any purpose expressly or impliedly made known to the Contractor by Crown Agents; d. unless otherwise expressly stated in the Contract, provide all Installation Equipment and such other items as are required to provide the Services; e. use the best quality goods, materials, standards and techniques and ensure that the Deliverables and all Goods and materials supplied and used in the Services or transferred to Crown Agents, the Principal or the End-User will be free from defects in workmanship, installation and design; f. not to do or omit to do anything that may cause Crown Agents, the Principal or any End-User to lose any licence, authority, consent or permission upon which it relies for the purpose of conducting its business. 3.6 The Contractor shall ensure that at all times it has and maintains all the licences, permissions, authorisations, consents and permits that it needs to carry out its obligations under the Contract.

STANDARDS AND REGULATIONS. 3.1 The Goods shall be supplied in accordance with the description and specification set out in the Contract. 3.2 Where no specification or standard is stated then all Goods shall be supplied in accordance with the relevant JIS Standard, or to a recognised national standard in the country of manufacture acceptable to Crown Agents. 3.3 The Contractor shall comply with all applicable statutory and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Goods, including without limitation all applicable statutory and regulatory requirements within the country where the Goods are manufactured and within the Principal’s country. 3.4 The Contractor shall provide the Services in accordance with the terms of the Contract. 3.5 In providing the Services the Contractor shall: a. co-operate co‐operate with Crown Agents and/or the Principal and/or the End-User End‐User in all matters relating to the Services and comply with all instructions of Crown Agents; b. perform the Services with the best care, skill and diligence in accordance with best practice in the Contractor’s industry, profession or trade; c. ensure that the Services and Deliverables will conform with all descriptions and specifications set out in the Contract and that the Deliverables shall be fit for any purpose expressly or impliedly made known to the Contractor by Crown Agents; d. unless otherwise expressly stated in the Contract, provide all Installation Equipment and such other items as are required to provide the Services; e. use the best quality goods, materials, standards and techniques and ensure that the Deliverables and all Goods and materials supplied and used in the Services or transferred to Crown Agents, the Principal or the End-User End‐User will be free from defects in workmanship, installation and design; f. not to do or omit to do anything that may cause Crown Agents, the Principal or any End-User End‐User to lose any licence, authority, consent or permission upon which it relies for the purpose of conducting its business. 3.6 The Contractor shall ensure that at all times it has and maintains all the licences, permissions, authorisations, consents and permits that it needs to carry out its obligations under the Contract.

STANDARDS AND REGULATIONS. 3.1 The Goods shall be supplied in accordance with the description and specification set out in the Contract. 3.2 Where no specification or standard is stated then all Goods shall be supplied in accordance with the relevant JIS ISO Standard, or to a recognised national standard in the country of manufacture acceptable to Crown Agents. 3.3 The Contractor shall comply with all applicable statutory and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Goods, including without limitation all applicable statutory and regulatory requirements within the country where the Goods are manufactured and within the PrincipalEnd- User’s country. 3.4 The Contractor shall provide the Services in accordance with the terms of the Contract. 3.5 In providing the Services the Contractor shall: a. co-operate with Crown Agents and/or the Principal and/or the End-User in all matters relating to the Services and comply with all instructions of Crown Agents; b. perform the Services with the best care, skill and diligence in accordance with best practice in the Contractor’s industry, profession or trade; c. ensure that the Services and Deliverables will conform with all descriptions and specifications set out in the Contract and that the Deliverables shall be fit for any purpose expressly or impliedly made known to the Contractor by Crown Agents; d. unless otherwise expressly stated in the Contract, provide all Installation Equipment and such other items as are required to provide the Services; e. use the best quality goods, materials, standards and techniques and ensure that the Deliverables and all Goods and materials supplied and used in the Services or transferred to Crown Agents, the Principal or the End-User will be free from defects in workmanship, installation and design; f. not to do or omit to do anything that may cause Crown Agents, the Principal or any End-End- User to lose any licence, authority, consent or permission upon which it relies for the purpose of conducting its business. 3.6 The Contractor shall ensure that at all times it has and maintains all the licences, permissions, authorisations, consents and permits that it needs to carry out its obligations under the Contract.

STANDARDS AND REGULATIONS. 3.1 The Goods shall be supplied in accordance with the description and specification set out in the Contract. 3.2 Where no specification or standard is stated then all Goods shall be supplied in accordance with the relevant JIS Standard, or to a recognised national standard in the country of manufacture acceptable to Crown Agents. 3.3 The Contractor shall comply with all applicable statutory laws and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Goods, . including without limitation all applicable statutory and regulatory requirements within the country where the Goods are manufactured and within the Principal’s country. 3.4 The Contractor shall provide the Services in accordance with the terms of the Contract. 3.5 In providing the Services the Contractor shall: a. co-operate with Crown Agents and/or the Principal and/or the End-User in all matters relating to the Services and comply with all instructions of Crown Agents; b. perform the Services with the best care, skill and diligence in accordance with best practice in the Contractor’s industry, profession or trade; c. ensure that the Services and Deliverables will conform with all descriptions and specifications set out in the Contract and that the Deliverables shall be fit for any purpose expressly or impliedly made known to the Contractor by Crown Agents; d. unless otherwise expressly stated in the Contract, provide all Installation Equipment and such other items as are required to provide the Services; e. use the best quality goods, materials, standards and techniques and ensure that the Deliverables and all Goods and materials supplied and used in the Services or transferred to Crown Agents, the Principal or the End-User will be free from defects in workmanship, installation and design; f. not to do or omit to do anything that may cause Crown Agents, the Principal or any End-User to lose any licence, authority, consent or permission upon which it relies for the purpose of conducting its business. 3.6 The Contractor shall ensure that at all times it has and maintains all the licences, permissions, authorisations, consents and permits that it needs to carry out its obligations under the Contract.

STANDARDS AND REGULATIONS. 3.1 The Goods shall be supplied in accordance with the description and specification set out in the Contract. 3.2 Where no specification or standard is stated then all Goods shall be supplied in accordance with the relevant JIS Standard, or to a recognised national standard in the country of manufacture acceptable to Crown Agents. 3.3 The Contractor shall comply with all applicable statutory laws and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Goods, . including without limitation all applicable statutory and regulatory requirements within the country where the Goods are manufactured and within the Principal’s country. 3.4 The Contractor shall provide the Services in accordance with the terms of the Contract. 3.5 In providing the Services the Contractor shall: a. co-operate co‐operate with Crown Agents and/or the Principal and/or the End-User End‐User in all matters relating to the Services and comply with all instructions of Crown Agents; b. perform the Services with the best care, skill and diligence in accordance with best practice in the Contractor’s industry, profession or trade; c. ensure that the Services and Deliverables will conform with all descriptions and specifications set out in the Contract and that the Deliverables shall be fit for any purpose expressly or impliedly made known to the Contractor by Crown Agents; d. unless otherwise expressly stated in the Contract, provide all Installation Equipment and such other items as are required to provide the Services; e. use the best quality goods, materials, standards and techniques and ensure that the Deliverables and all Goods and materials supplied and used in the Services or transferred to Crown Agents, the Principal or the End-User End‐User will be free from defects in workmanship, installation and design; f. not to do or omit to do anything that may cause Crown Agents, the Principal or any End-User End‐User to lose any licence, authority, consent or permission upon which it relies for the purpose of conducting its business. 3.6 The Contractor shall ensure that at all times it has and maintains all the licences, permissions, authorisations, consents and permits that it needs to carry out its obligations under the Contract.